Hi, After releasing the radio, MMI 3G Basic. I managed to put them up with UART. I played soft k0257 and the radio starts, but only with the UART connected, after disconnecting the cables from the radio or UART from the PC, it does not start. After reconnecting and rebooting, it gets up. Anyone had a similar problem or have an idea?
skasowałem SWDL
flashit -a 0x00040000 -d -f /mnt/sdcard10t12/MU9304/fpga/41/default/SystemFPGA.hbbin
flashit -a 0x00100000 -d -f /mnt/sdcard10t12/MU9304/fpga-emg/41/default/SystemFPGA.hbbin
flashit -a 0x001C0000 -d -f /mnt/sdcard10t12/MU9304/ifs-emg/41/default/ifs-emg.ifs
flashit -a 0x00580000 -d -f /mnt/sdcard10t12/MU9304/ifs-root/41/default/ifs-root.ifs
flashit -a 0x05600000 -d -f /mnt/sdcard10t12/MU9304/efs-system/41/default/efs-system.efs
flashit -a 0x06A00000 -d -f /mnt/sdcard10t12/MU9304/efs-persist/41/default/efs-persist.efs
without result flashit -a 40000 -e 1000
flashit -a 00580000 -e 1000
without result
green menu -> Emergency
without result
IPL: 3G_9304 / QNX 6.3.0 [PL_qnx_ipl-3g_9304_08253A, built 2008/06/18_15-15-57_UTC]
CPU: SH7785 (>= 5th cut, clk mode 20, 2xDDR), 792MHz
RAM: 256 MB (probed, DBCONF=db0002)
FLASH: Spansion S29GL512N (32bit): 512 sectors x 256K
FPGA: PL_MMI3G_FPGA_9304_D1_11285A (0ms)
*** Old-fashioned mark found on IFS @0x1c0000: .zero=0x3000001b
*** Old-fashioned mark found on IFS @0x580000: .zero=0x10000000
starting image @580000 ...
Startup: , built 2011/07/19_09-41-26_UTC
NVRAM: 31 MB @0x16100000
RAM : 225 MB @0x08000000
FLASH: 128 MB @0x00000000
System page at phys:0800a000 user:0800a000 kern:8800a000
Starting next program at v8804aae0
Welcome QNX6.3.2 (RL_qnx_os_630SP2_PSP10_07511A)- Harman/Becker MMI3G Build D1 9303/04 D1-13234A
s: 0
v: 0
r: 0
m: 0
mkprocsymlinks 0.10, reading /mnt/ifs-root/etc/system/efs_symlinks.cfg
done
s: 0
v: 0
r: 0
m: 0
mkprocsymlinks 0.10, reading /mnt/ifs-root/etc/system/ifs-root_symlinks.cfg
done
starting server starter...
# multicored [000000000.870]:version 4.1.d, verbosity 1 (supported 4), scope 0x00000001, console: /dev/ser1 (fd=3), FILE_LOGGING, TESTCONTROL
multicored [000000000.919]:udp: broadcaster created
multicored [000000000.922]:attached to filesystem at /hbsystem/multicore, port 851
multicored [000000000.926]:MACHINE:SH(1), total MEM 235929600, 1: 271582976 SH7785 (SH4A) 792MHz, FPU
multicored [000000000.926]:sloop active
multicored [000000000.928]:lo0 127.0.0.1 255.0.0.0
multicored [000000000.942]:listener on port 851 active, fd=7
dev-nvram: PL_qnx_dev-nvram_07225A, built 2007/06/01_15-44-08_UTC
dev-nvram: page_size:4096
dev-nvram: signalling register 10ee:9304:0:40:40 [vid:did:bar
ffs:mask]
dev-nvram: CPU: SH7785 (5th cut or higher, clk_mode 20) [10300700:250, 133735fa]
dev-nvram: map '/dev/nvram/navi' to 0x16100000-0x17ffefff
dev-nvram: map '/dev/nvram/.guard' to 0x17fff000-0x17ffffff
dev-nvram: SelfRefresh was inactive
UART: Mod:0E Date:08511A Ver:2.2.1
devc-ser8250hb: UART supports FiFo counter
devc-ser8250hb: UART supports 32bit access
devc-ser8250hb: RX_FIFO_SIZE:512 TX_FIFO_SIZE:512
devc-ser8250hb: set IBUF size to 4096
UART: Mod:0E Date:08511A Ver:2.2.1
devc-ser8250hb: UART supports FiFo counter
devc-ser8250hb: RX_FIFO_SIZE:32 TX_FIFO_SIZE:32
UART: Mod:0E Date:08511A Ver:2.2.1
devc-ser8250hb: UART supports FiFo counter
devc-ser8250hb: RX_FIFO_SIZE:32 TX_FIFO_SIZE:32
Debug filehandle = 4
For further debug messages have a look at multicore output consoles '/hbsystem/multicore/navi/g'
JVMEXEL085W
WARNING: The command line argument "-jxe:" has been deprecated.
WARNING: Use "-jxe <path>" instead.
DSIVersion: 0.0.0
DSISource: DSI 2010_44_44
DSI-Build-Version: 30.11.09/v1.138.3
ReleaseLabel: Integration_AU_MMI3G_11320P
start JDSI bundle
jdsi.loglevel : 2
No External Component found
stream factory memory mode : classic
dsigen v1.138.3 - core v2.1
prop os.arch : sh4
prop jdsi.3SoftOSGi : true
DSI dispatcher disabled!
Path=0 - XILINX MMI3G_4
target=0 lun=0 CD-ROM(5) - FJ-TEN DVD-ROM DV-04FT1 Rev: 1423
cd0 mounted after 1 try
[MSG]@4224 (53285.161): COnOffPresCtrl::requestSetPowerState(), state: 3
[MSG]@4470 (53285.161): COnOffPresCtrl: IOCBoloMode: 0
[MSG]@4471 (53285.161): -- getHardwareSample: state=2 -- hwSample = 0xd1
[MSG]@4471 (53285.161): -- getHardwareVariant: state=2 -- hwVariant = 0x3
[MSG]@4472 (53285.161): COnOffPresCtrl: newSystemState: 1
[MSG]@4479 (53285.161): COnOffPresCtrl::requestSetPowerState(), state: 1
[MSG]@4548 (53285.161): COnOffPresCtrl: newSystemState: 45
[MSG]@4614 (53285.161): COnOffPresCtrl: newSystemState: 35
[MSG]@4636 (53285.161): COnOffPresCtrl: newSystemState: 20
msgpassing channel opened on /dev/dsi/data
NAVI: sys_alloc_shm_area(/dev/nvram/navi) open() ok: 31
NAVI: sys_alloc_shm_area(/dev/nvram/navi) filesize() = 32501760
NAVI: sys_alloc_shm_area(/dev/nvram/navi) mmap to 50000000
[MSG]@5028 (53285.161): +++ PRODUCTION_MODE is 0
[MSG]@5031 (53285.161): +++ remounting of the efs partitions is done, persistency is set to fully operable...
[MSG]@5055 (53285.161): +++ TEL_SETTINGS_REST is 0
[MSG]@5067 (53285.161): +++ ReadInt FLAG_SYSTEM_RESET, Value 0
[MSG]@5067 (53285.161): +++ normal shutdown detected, save ON as FLAG_SYSTEM_RESET
[MSG]@5083 (53285.161): +++ MISC_HB_REGIONCODE 0
[MSG]@5109 (53285.161): +++ successfull writing FLAG_SYSTEM_RESET
Duration of starting JDSIBundle : 2203ms
[MSG]@5388 (53285.161): +++ persistency StartupMode is 1
decoder thread priority : 2000:0 (5)
[MSG]@5444 (53285.161): COnOffPresCtrl: newSystemState: 4
decoder thread priority : 100:0 (5)
CHBComponentMux.cpp:317: ASSERTION failed
CHBComponentMux.cpp:275: ASSERTION failed
decoder thread priority : 12:0 (5)
[MSG]@5732 (53285.161): COnOffPresCtrl: newSystemState: 6
[MSG]@5777 (53285.161): +++ HW index: d1 variant: 9303
[MSG]@5789 (53285.161): +++ MISC_HB_REGIONCODE 0
decoder thread priority : 9:0 (5)
AS: 2
decoder thread priority : 4:0 (5)
AS: 3
CPS: 1
AS: 2
Path=0 -
target=0 lun=0 Direct-Access(0) - 00000 Rev: 1.0
decoder thread priority : 50:0 (5)
AS: 3The message must not be null or of zero length
decoder thread priority : 24:0 (5)
decoder thread priority : 51:0 (5)
decoder thread priority : 8:0 (9)
dev-adjmanager: PL_qnx_dev-adjmanager_08182A, built 2008/04/29_12-08-24_UTC
Performing select():
MediaLauncher: [30 bytes]: ADD_SDC_MSD_/mnt/sdcard10t12
*** Jan 22 2013 / 13:08:23 ***
[MSG]@10197 (53285.161): +++ HW index: d1 variant: 9303
[MSG]@10206 (53285.161): +++ MISC_HB_REGIONCODE 0
Audi-2D java library version: 20081127
Using HB FPGA driver
io-media-generic/mediafs_2wire: snd_mixer_group_read("Mic") failed (6)
io-media-generic/mediafs_2wire: Error 1
io-media-generic/mediafs_2wire: apply_volume failed with 6.
decoder thread priority : 28:0 (5)
### Jan 22 2013 / 13:08:22 ###
[MSG]@22145 (53285.161): +++ HW index: d1 variant: 9303
[MSG]@22154 (53285.161): +++ MISC_HB_REGIONCODE 0
decoder thread priority : 18:0 (5)
[MSG]@22969 (53285.161): COnOffPresCtrl: newSystemState: 14
[MSG]@22975 (53285.161): COnOffPresCtrl::requestSetPowerState(), state: 1
[MSG]@23051 (53285.161): +++ HW index: d1 variant: 9303
[MSG]@23057 (53285.161): +++ successfull writing FLAG_SYSTEM_RESET
[MSG]@23074 (53285.161): +++ MISC_HB_REGIONCODE 0
decoder thread priority : 26:0 (5)
start SSSProcess -> Config File: "/mnt/sss/general/default.cfg"
--> SAM is running.
[MSG]@25284 (53285.161): +++ PRODUCTION_MODE is 0
*************************************************************
* Welcome to SVOX Pro 4.0.1.7-p1 *
* licensed to Audi produktkey. *
* (C) 2000-2007 SVOX AG *
* SVOX AG, Baslerstr. 30, CH-8048 Zurich,
mail@svox.com *
*************************************************************
loading user preproc 'ppxx-XX0.txt'
[MSG]@26140 (53285.174): CGNavAppLDSM created, mMaxListSize=20
NavApp: Creating CGNavAppCtrl with configuration CPNavAudiNG3NavAppConfig, RT2 is enabled
[MSG]@26901 (53285.174): Set DM_RecentRoutes_List
[MSG]@26911 (53285.174): IPNavPersistenceCtrlClient:
rocessEvent() called
[MSG]@26919 (53285.174): Receveid EVENT_DATA_READ
[MSG]@26929 (53285.174): updating LD_List
[MSG]@26939 (53285.174): Set DM_LastDestinations_List
[MSG]@26949 (53285.174): 149: (PL) KONIECPOL, Centre
NavApp: Persistence data loaded, persistence ctrl is: CGNavAppPersistence(CPNavPersistenceStoragePersistency: role=NavAppCtrl)
HBServices.cpp:284: ASSERTION "not implemented" failed
HBServices.cpp:284: ASSERTION "not implemented" failed
TMC_WINDOW_SIZE: 15
TMC_OFFSET: -7
TMC_LOWER_BARRIER: 10
TMC_UPPER_BARRIER: 20
TMC_READ_OUT: deactivated
TMC_WINDOWS: 1
loading user preproc 'ppxx-XX0.txt'
decoder thread priority : 45:0 (5)
[>>> Starting start_network.sh ... <<<]
multicored [000000041.029]:debuglevel changed to 1, connection /hbsystem/multicore
multicored [000000041.030]:startup phase ending for 0
start PSSBSSProcess -> Config File: "/mnt/sss/general/pss.cfg"
--> SAM is running.
+++ Train BNav_EU_K0257_2_D1
+++ Version MU-MMI3G-U996A-00.00.0007
decoder thread priority : 49:0 (5)
[MSG]@44787 (53285.161): +++ PRODUCTION_MODE is 0
decoder thread priority : 56:0 (5)
decoder thread priority : 58:0 (5)
HBServices.cpp:284: AppDevelopment initialized.: 1A
SSERTION "not implemented" faildecoder thread priority : 60:0 (5)
ed
[MSG]@46941 (53285.161): +++ MISC_HB_REGIONCODE 0
Unable to access /dev/io-net/en5
starting dhcp client - normal net, retry every 5 seconds if not available
ifconfig: SIOCGIFFLAGS en5: No such device or address
Set IP over MOST to en1
... done on /dev/io-net/en1
multicored [000000048.979]:en1 10.0.0.100 255.255.255.0
multicored [000000048.980]:udp: broadcaster_activate(), g_proc_chg_flags 0x0000000f
multicored [000000048.981]:udp: broadcaster on port 851 activated, fd=8