Turbo Quattro

Дальше систему не грузит строка бежит до бесконечности с надписью
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]

клиент обновил прошивку us на eu и больше не загрузилась vw touareg 2012

IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_08253A, built 2008/06/18_15-16-25_UTC]
CPU: SH7785 (>= 5th cut, clk mode 20. 4xDDR), 792MHz
RAM: 512 MB (probed, DBCONF=e30002)
FLASH: Spansion S29GL512N (32bit): 512 sectors x 256K
FPGA: PL_MMI3G_PLUS_FPGA_9411_D1_11384A (0ms)
*** Old-fashioned mark found on IFS @0x1c0000: .zero=0x30000018
*** Old-fashioned mark found on IFS @0x680000: .zero=0x10000000
starting image @680000 ...


Startup: PL_qnx_startup-sh7785_11292A, built 2011/07/19_08-03-38_UTC
RAM : 128 MB @0x08000000
RAM : 128 MB @0x40000000
NVRAM: 36 MB @0x5dc00000
RAM : 220 MB @0x50000000
FLASH: 128 MB @0x00000000▒
FPGA IRQ: Interrupt Controller ID:33 Ver:2.1.0 ILVL:7 Lines:255


System page at phys:0800a000 user:0800a000 kern:8800a000
Starting next program at v8804bae0
Welcome QNX6.3.2 (QNXLabel RL_qnx_os_632_PSP3_08041A)- Harman/Becker MMI3GP Build 9478 C1 D1-15085A
USB-stuff (QNXLabel RL_qnx_os_632_PSP3_08041A)
Password:NV: Waiting for the minirm init done indication file /dev/shmem/nvminirm.finished'
NVLOADER: Booting DSP (DRAM Setup time = 1000 us)...
*NVLOADER: Done to call nvTsrmRawLoad for file /etc/NvDspCodecs.elf
Enabling!LMA using channel 11
Overriding default Interrupt Priority
Current debug level = 0x7fffffff
dmaChannel = 11, interrupt thread priority = 21
devg-NVMEM: Mapped vaddr 0x38100000 to paddr 0x5d597000
[pcidma] PL_qnx_pcidma_FM▒d08363A_09274A, built 2009/07/02_11-10-37_UTC
multicored [000000001.609]:version 4.6.d, verbosity 1 (supported 4), scope 0x00000001, console: /dev/ser1 (fd=3), FILE_LOGGING, TESTCONTROL, DYNAMIC_LOAD
multicored [000000001.611]:using 750 buffers of size 1460 (total 1095000 bytes)
multicored [000000001.639]:version 4.6.d, verbosity 2 (supported 4), scope 0x00000001, console: /dev/ser1 (fd=3), FILE_LOGGING, TESTCONTROL, DYNAMIC_LOCD
multicored [000000001.668]:udp: broadcaster created
[pintest] Attaching nmi hindler to 4096
[pintest] Attaching pci handler to 8245
[pintest] Applying NMI patch
multicored [000000001.690]:attqched to filesystem at /hbsystem/multicore, port 851
multicored [000000001.704]:MACHINE:SH(1), total MEM 499122176, 1: 271582976 SH7785 (SH4A) 792MHz, FPU
multicored([▒00000001.710]:sloop active
multicored [000000001.712]:lo0 127.0.0.1 255.0.0.0
multicored [000000001.71:] flog0 0.0.0.0 0.0.0.0
multicored [000000001.739]:listener_activate()
multicored [0000004▒1.741]:listener on port 851 active, fd=7
Mask = c3
GPIO 7 set to Low
Overriding default Interrupt Priority
dev-nvram: PL_qnx_dev-nvram_07225A, built 2007/06/01_15-44-08_UTC
dev-nvram: page_size:4096
dev-nvram: signalling register 10ee:9411:0:40:40 [vid:did:bar ffs:mask]
dev-nvram: CPU: SH7785 (5th cut or higher, clk_mode 20) [10300700:250, 133735fa]
dev-nvram: map '/dev/nvram/navi' to 0x5dc00000-0x5fffefff
dev-nvram: map '/dev/nvram/.guard' to 0x5ffff800-0x5fffffff
dev-nvram: SelfRefresh was inactive
UART: Mod:0E Date:09503A Ver:2.2.2
devc-ser8250hb: UART supports FiFo counter
devc-ser8250hb: UART supports 32bit access
devc-ser8250hb: RX_FIFO_SIZE:2048 TX_FIFO_SIZE:2048
devc-ser8250hb: set IBUF size to 16384
UART: M▒d:0E Date:09503A Ver:2.2.2
devc-ser8250hb: UART supports FiFo counter
devc-ser8250hb: RX_FIFO_SIZE:512 TX_FIFO_SIZE:512
UART: Mod:0E Date:09503A Ver:2.2.2
devc-ser8250hb: UART supports FiFo counter
devc-ser8250hb: RX_FIFO_SIZE:32 TX_FIFO_SIZE:32
Debug filehandle = 4
For further debug messages have a look at multicore output consoles '/hbsystem/multicore/navi/g'
[pcidma] PL_qnx_pcidma_FMod08363A_09441A, built 2029/10/26_07-46-16_UTC
[t(p) sbin/io-media-nvidia▒61479 1 10 70337242]
mam0 available
NAVI: sys_alloc_shm_area(/dev/nvram/navi) open8) ok: 9
NAVI: sys_alloc_shm_area(/dev/nvram/navi) filesize() = 37744640
NAVI: sys_alloc_shm_area(/dev/nvram/navi-▒mmap to 38100000
NAVI: sys_alloc_shm_area(/dev/nvram/navi): physical of 38100000 at 5dc00000
NV_ENABLE_DYNAMIC_PRIORITIES is enabled
max-consecutive-errors set to 2

timeout retries config string == |2|
timeout-retries set to 2






io-media-nvidia built: Jul 4 2013 14:29:31 against Official Tree


nv_global.verbose = 0


Virtual Address for CDDA DirectIO = 842F000
0,"nVAudio_init: IN
0,"nVAudio_class_init: IN
nVAudio_class_init: OUT success
0,"nvidia_render_manager_init();
0,"nVAudio_init: IN
0,"nVAudio_class_init: IN
nVAudio_class_init: OUT success
0,"nVAudio_class_init: IN
nVAudio_class_init: OUT success
io-media-nvidia/a2dp_player: The 'metadata-timeout' setting is missing or has an invalid value, defaulting to 4000ms
0,"nVAudio_init: IN
0,"nVAudio_class_init: IN
nVAudio_class_init: OUT success
0,"nvidia_render_manager_init();
0,"nVAudio_init: IN
WARNING: NON PERFORMANT MODULAR STARTUP!!!
cd0 moun|e▒ after 1 try
Path=0 - XILINX ATAPI
target=0 lun=0 CD-ROM(5) - FJ-TEN DVD-ROM DV-05FT2 Rev: 1B20
Path=1 - XILINX"ATAPI
target=1 lun=0 Direct-Access(0) - TOSHIBA MK6050GA Rev: TJ10
[t(p) proc/boot/procnto-instr 1 5 16 8804bb06]
[t(c) usr/apps/MMI3GApplication 122921 11 16 703351fe]
[MSG]@4787 (122921.30): COnOffPresCtrl: set power state (front) : ▒


[MSG]@5082 (122921.30):`+++ PRODUCTION_MODE is 0
[ERR]@5095 (122921.30): --- navi swapfile could not be removed
[MSG]@5095 (122921.30): +++ persistency is set to fully operable...
[MSG]@5139 (122921.30): +++ HW index: d1 variant: 9478
[MSG]@5150 (122921.30): +++ TEL_SETTINGS_REST is 3
[MSG]@5150 (122921.30): +++ setting BtAvailable to true
[MSG]@5182 (122921.30): +++ ▒eadInt FLAG_SYSTEM_RESET, Value 1
+++ Train N+_EU_VW_)&N▒LC▒▒▒%HU▒׮▒▒
R▒U▒▒*j▒T e▒▒j▒▒r▒▒r▒▒▒▒j▒▒[MSG]@5211 (122921.30): +++ PRODUCTION_MODE is 0
!PPC: CIOCPresCtrlPersiste▒ce: rocessResponseDataSetReadBuffer: DATASET_BUS_ASSIGNMENT_COMPLETE CRC not ok; different CRCs: receivedCRC =00x6400; calculatedCRC = 0x52d4; sending empty buffer!PPC: CIOCPresCtrlPersistence: rocessResponseDataSetReadBuffer DATASET_BUS_ASSIGNMENT_COMPLETE CRC not ok; different CRCs: receivedCRC = 0x6400; calculatedCRC = 0x52d4; sending empty buffer[MSG]@5762 (122921.30): COnOffPresCtrl: IOCBoloMode: 0
[MSG]@5762 (122921.30): -- getHardwareSample state=2 -- hwSample = 0xd1
[MSG]@5764 (122921.30): -- getHardwareVariant: state=2 -- hwVariant = 0xb2
[MSG]@5764 (122921.30): COnOffPresCtrl: newSystemState: 49
[WRN]@5767 (122921.30): --- shutdown for OnOff clients is cancelled - canling handlePersistenceDone
[MSG]@5770 (122921.30): COnOffPresCtrl: change power state (front) : 3 -> 1
[MSG_@5806 (122921.30): COnOffPresCtrl: newSystemState: 20
[MSG]@5856 (122921.30): COnOffPresCtrl: newSystemState: 35
[WRN]@5926 (122921.30): ++ persistency is not fully operable
[MSG]@5927 (122921.43): Registering component OnOffPresCtrl a


!PPC: CIOCPresCtrlPersistence::rrocessResponseDataSetReadBuffer: DATASET_BUS_ASSIGNMENT_COMPLETE CRC not ok; different CRCs: receivedCRC = 0x6400; calcul▒tedCRC = 0x52d4; sending empty buffer[MSG]@6178 (122921.43): Registering component Time a


[MSG]@6189 (122921.43): Registering component VideoManagementDevCtrl a


[WRN]@6259 (122921.30): ++ persistency is not fully operable
[MSG]@6287 (122921.30): +++ persistency is fully operable
[MSG]@6289 (122921.43): Registering component AudioManagementDevCtrl f


[t(p) proc/boot/prog▒to-instr 1 6 10 8802ffa0]
[t(c) usr/bin/checkFreeMem 28687 1 10 7033519a]
checkFreeMem: giving up searching for process pids
DSIVersion: 0.0.0
DSISource: DSI 2013_26_26
DSI-Build-Version: Mon Jun 24 11:14:01 CEST 2013 /▒DSIGEN v1.138.4
ReleaseLabel: Int_VW_SOP12_150800P
start JDSI bundle
HBTRACE: jdsi.verboselevel = null => verbose-level = 0 because property not set or invalid
jdsi.loglevel : 2

No External Component found
stream factory memory mode : no poolkng
dsigen v1.138.4 - core v2.1
prop os.arch : sh4
prop jdsi.3SoftOSGi : true
DSI dispatcher disabled!
msgpassing channel opened on /dev/dsi/data
DSIAddressbook (0) - v21.0G1.138.4
DSIAddressbook (1) - v21.0G1.138.4
DSIAddressbook (2) - v21.0G1.138.4
DSIAddressbook (3) - v21.0G1.138.4
DSIAlbumBrowser (0) - v3.0G1.138.4
DSIAMFMTuner (0i - v17.0G1.138.4
DSIAudioManagement (0) - v50.1G1.138.4
DSIBluetooth (0) - v15.0G1.138.4
DSIBrowser (0) - v24.0G1.138.4
DSIBrowser (1) - v24.0G1.138.4
DSIBrowser (2) - v24.0G1.138.4
DSIBrowser (3) - v24.0G1.138.4
DSIBrowser (4) - v24.0G1.138.4
DSICallLists (0) - v3.0G1.138.4
DSICarClimate (0) - v4.0G1.138.4
*DSICarComfort (0) - v3.0G1.138.4.4
DSICarComfortExt (0) - v18.0G1.138.4
DSICarHybridExt (0) - v3.3G1.138.4
DSICarParkingSystem (0) - v2.4G1.138.4
DSICarParkingSystemExt (0) - v18.0G1.138.4
DSICarSuspensionControl (0) - v1.0G1.138.4
DSICarSuspensionControlExt (0) - v7.0G1.138.4
DSICarLight (0) - v2.0G1.138.4
DSICarLightExt (0) - v3.1G1.1;8.4
DSICarSeat (0) - v18.0G1.138.4
DSICarService (0) - v5.1G1.138.4
DSICarDriverAssistance (0) - v2.0G1.138.4
DSICarDriverAssistanceExt (0) - v15.0G1.138.4
DSICarKombi (0) - v4.4G1.138.4
DSICarKombiExt (0) - v19.0G1.138.4
LSIDABTuner (0) - v5.3G1.138.4
DSIDataConfiguration (0) - v11.0G1.138.4
DSIDataConnection (0) - v21.1G9.138.4
DSIDiagHMIAttribs (0) - v7.0G1.138.4
DSIDialup (0) - v2.0G1.138.4
DSIHMISync (0) - v2.0G1.138.4
DSIIconrenferer (0) - v2.0G1.138.4
DSIIconrenderer (1) - v2.0G1.138.4
DSIDataDisplay (0) - v5.0G1.138.4
DSIDataDisplayDDP2$▒0) - v3.1G1.138.4
DSIDisplayManagement (0) - v21.0G1.138.4
DSIInbox (0) - v2.0G1.138.4
DSIInfotainmentRecorder (0) - v2.0G1.138.4
DSIIP (0) - v11.0G1.138.4
DSIKeyPanel (0) - v30.0G1.138.4
DSIKOMONavInfo (0) - v2.0G1.138.4
DSIKOMOView (0) - v3.0G1.138.4
DSIMapViewer (0) - v28.1G1.138.4
DSIMapViewerControl (0) - v13.0G1.138.4
DSIMapViewmrGoogleCtrl (0) - v16.0G1.138.4
DSIMapViewerLandmarkPlayer (0) - v1.0G1.138.4
DSIMapViewerManeuverView (0) - v1.0G1.138.4
DSIMapViewerRouteBlock (0) - v1.0G1.138.4
DSIMapViewerZoomEngine (0) - v1.1G1.138.4
DSIMedia (0) - v19.5G1.138.4
DSIMedia (1) - v19.5G1.138.4
DSIMediaRecorder (0) - v3.0G1.138.4
DSIMOSTInfo (0) - v3.0G▒.138.4
DSINavigation (0) - v107.1G1.138.4
DSINavigation (1) - v107.1G1.138.4
DSIObexAuthentication (0) - v1.0G1.138.4
DSIPhonoConv (0) - v11.0G1.138.4
DSIPersistence (0) - v20.0G1.138.4
DSIPowerManagement (0) - v23.0G1.138.4
DSIStartu▒ (0) - v1.4G1.138.4
DSIStartup (1) - v1.4G1.138.4
DSIProfileManager (0) - v17.1G1.138.4
DSISDARSTunez (0) - v2.2G1.138.4
DSISMS (0) - v5.0G1.138.4
DSISound (0) - v38.0G1.138.4
DSISSS (0) - v6.2G1.138.4
DSISwdlDeviceInfo (0) - v1.1G1.138.4
DSISwdlLogging (0) - v1.1G1.138.4
DSISwdlProgress (0) - v1.3G1.138.4
DSISwdlSelection (0) - v2.11G1.138.4
DSITelephone (0) - v55.0G1.138.4
DSITelephone (1) - v55.0G1.138.4
DSITIMTuner (0) - v2.3G1.138.4
DSITmk (0) - v29.0G1.138.4
DSITmcOnRoute (0) - v6.0G1.138.4
DSITrafficRegulation (0) - v3.0G1.138.4
DSITTS (0)"m v6.0G1.138.4
DSITTS (1) - v6.0G1.138.4
DSITunerAnnouncement (0) - v1.0G1.138.4
DSITVTuner (0) - v12.1G1.▒38.4
DsIVCardExchange (0) - v17.0G1.138.4
DSIWavePlayer (0) - v5.2G1.138.4
DSIWavePlayer (1) - v5.2G1.138.4
DSIWLAN (0) - v15.1G1.138.4
DSICryptoManagerHMI (0) - v1.0G1.138.4
DSIOnlineTrafficConsumer (0) - v3.1G1.138.t
DSIComponentProtection (0) - v1.0G1.138.4

Duration of starting JDSIBundle : 699ms
decoder thread priority : 2000:0 (5)
decoder thread priority : 100:0 (10)
decoder thread priority : 12:0 (7)
!PPC: CIOCPresCtrlPersistence: rocessResponseDataSetReadBuffer: DATASET_BWS_ASSIGNMENT_COMPLETE CRC not ok; different CRCs: receivedCRC = 0x6400; calculatedCRC = 0x52d4; sending empty buffer!PPC: CIOCPresCtrlPersistence: rocessResponseDataSetReadBuffer: DATASET_BUS_ASSIGNMENT_COMPLETE CRC not ok; different CRCs: receivedCRC = 0x6400; calculatedCRC = 0x52d4; sending empty buffer[MSG]@8728 (122921.30): +++ MISC_HB_REGIONCODE 0
[t(p) j9/bin/j9 114726 10 10 782243f0]
*dev-adjmanager: PL_qnx_dev-adjmanager_09373A, built 2009/09/09_12-31-22_UTC
Configuration File : "/mnt/sss/general/default.cfg"
--> SAM is initialized
--> SAM is running
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
_CS_RESOLVE:
undefined
=== Workaround: set nocache_on to _CS_RESOLVE: ===
[>>> Start late networking services (inetd, devc-pty) in start_network.sh ... <<<]
nocache_on




===========================================================================
SCP Configuration
===========================================================================


Build Version : "SCP__Rel_M0902_Trunk__14201A"
Configuration File : "/usr/data/nws.cfg"
Configuration Library : "libpss_config.so"
Channel(s)annel : "MonitorService"
"AliveService"
"RmssService"
"ConfigService"
"NetworkingService"
"UPnPService"
"DSIService"
Key Value(s) : "VerboseLevel=2"


===========================================================================


..loading configuration library "libpss_config.so" ...ok
..loading channel library "libhostagent.so" for "HostAgent" ...ok
..loading channel library "libmonitorservice.so" for "MonitorSesvice" ...ok
..loading channel library "libaliveservice.so" for "AliveService" ...ok
..loading channel library "librmssservice.so" for "RmssService" ...ok
..loading channel library "libconfigservice.so" for "ConfigService" ...ok
Path=0 -
target=0 lun=0 Direct-Access(0) - EB1QT Rev: 3.0
..loading channel library "libnetworkingservice.so" for "NetworkingService" ...ok
[t(p) usr/apps/NavCore 90152"12 11 80a73c0]
..loading channel library "libupnpservice.so" for "UPnPService" ...ok
..loading channel library "libdsiservice.so" for "DSIService" ...ok
--> SAM ys initialized
..initializing addon "SSSMonitor" ...ok
..initializing channel "HostAgent" ...ok
..initielizing channel "MonitorService" ...ok
..initializing channel "AliveService" ...ok
..initializing channel "RmssService" ...ok
..initializing channel "ConfigService" ...ok
..initializing channel "NetworkingService" ...ok
..initializing channel "UPnPService" ...ok
..initializing channel "DSIService" ...ok
--> SAM is running
[t(p) proc/boot/procnto-instr 1"1 0 88074438]
Found AC75
Starting AC75
Initializing AC75 phone module
[>>> ...waiting for scp_pss <<<]




==============================================================▒============
SCP Configuration
===========================================================================


Build Version : "SCP__Rel_M0902_Trunk__14201A"
Configuration File : "/usr/data/pss.cfg"
Configuration Librazy : "libpss_config.so"
Default Channel : "HostAgent"
Channel(s) : "MonitorService"
"AliveService"rityService"
"AudioMatrixService"
"PhoneService"
"BSSService"
"NetAccessService▒
"SIMService"
"DataService"
"DmlService"
"MediaService"
"MediaRMService"
"SAIPService"
"SAOPService"
"RmssService"
"RemoteCtrlService"
"TTYdevService"
"ModemService"
"DSIService"
Key Value(s) : "VerboseLevel=2"
"MonitorService.Port=2021"


===========================================================================


..loading configuration library "libpss_config.so" ...ok
..loadinw channel library "libhostagent.so" for "HostAgent" ...ok
..loading channel library "libmonitorservice.so" for "MonitorService" ...ok
..loading channel library "libintegrityservice.so" for "IntegrityService" ...ok
..loading channen library "libaliveservice.so" for "AliveService" ...ok
..loading channel library "libaudiomatrixservice.so" for "AudioMatrixService" ...ok
..loading channel library "libphoneservice.so" for "PhoneService" ...ok
..loading channel library "libbssservice.so" for "BSSService" ...ok
..loading channel library "libngtaccessservice.so" for "NetAccessService" ...ok
..loading channel library "libsimservice.so" for!"SImService" ...ok
..loading channel library "libdataservice.so" for "DataService" ...ok
..loading channel library "libdmlservice.so" for "DmlService" ...ok
..loading channel library "libmediaservice.so" for "MediaService" ...ok
..loading channel library "libmediarmservice.so" for "MediaRMService" ...ok
..loading channel library "libsaipservice.so" for "SAIPService" ...ok
..loading channel library "libsaopservice.so"`for "SAOPService" ...ok
..loading channel library "librmssservice.so" for "RmssService" ...ok
..loading channel library "libremotectrlservice.so" for "RemoteCtrlService" ...ok
..loading channel library "libttydevservice.so" for "TTYdevService" .n.ok
..loading channel library "libmodemservice.so" for "ModemService" ...ok
..loading channel libr▒ry "libdsiservice.so" for "DSIService" ...ok
--> SAM is initialized
..initializing addon "SSSMonitor" ...ok
..initializing channel "HostAgent" ...ok
..initializing channel "MonitorService" ...ok
..initializing channel "IntegrityService" ...ok
..initializing channel "AliveService" ...ok
..initializing channel "AudioMatrixService& ...ok
..initializing`channel "PhoneService" ...ok
..initializing channel "BSSService" ...ok
[t(p) usr/bin/PSSBSSProcess 235336 3 11 782557b4]
..initializing channel "NetAccessService" ...ok
..initializing channel "SIMService" ...ok
..initializing channel "DataService" ...ok
..initializing channel "DMLService" ...ok
..initializing channel "MediaService" ...ok
..initializing channel "MediaRMService" ...ok
..initializing channel "SAIPService" ...ok
..i▒itializing cjannel "SAOPService" ...ok
..initializing channel "RmssService" ...ok
▒..initializing channel "RemoteCtrlService" ...ok
..initializing channel "TTYdevService" ...ok
..initializing channel "ModemService" ...ok
..initializing channel "DSIService" ...ok
--> SAM is running
[t(p) usr/bin/PSSBSSProcess 225336(64 11 78256b16]
[MSG]@20526 (122921.30): COnOffPresCtrl: newSystemState: 13
[MSG]@20550 (122921.30): +++ HW index: d1 variant: 9478
[MSG]@20556 (122921.30): +++ PRODUCTION_MODE is 0
[MSG]@20589 (122921.30): +++ MISC_HB_REGIONCODE 0
[t(p) ./MMI3GTelerhone 241723 4 11 70335c16]
[MSG]@20782 (122921.43): Registes▒ng component TelephonyPresCtrl f


[MSG]@21107 (122921.43): Registering component BluetoothPresCtrl f


[MSG]@21235 (122921.43): Registering component IPPresCtrl f


[MSG]@21330 (122921.43): Registering component DataConfigurationPresCtrl f


[MSG]@21589 (122921.30): +++ PRODUCTION_MODE is 0
decoder thread priority : 48:0 (6)
decoder thread priority : 49:0 (6)
[t(p) usr/bin/PSSCWSProcess 225336 30 18 7031d114]
decoder thread priority : 56:0 (5)
decoder thread priority : 29:0 (5)
[MSG]@23695 (122921.30): +++ MISC_HB_REGIONCODE 0
EOLFLAG_HU_VEHICLETYPE_INDEX: 0
EOLFLAG_HU_VARIANT_INDEX: 15
EOLFLAG_HU_REGION_INDEX: 0
DS: 5
DS: 2
DS: 2
decoder thread priority : 24:0 (6)
decoder thread priority : 9:0 (10)
CPS: 1 - 0
DS: 0
DS: 1
Audi-2D finalizer: Release
Audi-2D native lmbrary version: 20110914
HWGPlatform_checkLibraryVersion: 2
Audi-2D java library version: 20110914
Using NVIDIA driver
[t(p) usr/bin/dev-mv2trace 49187 1 11 80440b8]
[t(c) ./MMI3GMisc 241714 9 11 7033519a]
XPS: 108
decoder thread priority : 50:0 (5)
Tsacker WatchDog Alarm: call of addingService timed out[t(p) usr/bin/multicored 40982 2 11 7033b700]
[t(c) usr/bin/PSSBSSProcess 225336 6 11 7033519a]


[DSIDecoderThread:2000] bundle ATIPImpl (0) tracked service (54) of bundle JDSI (45)
org.dsi.ifc.carservice.DSICarServiceCLS: State: false
CLS: State:$false
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
checkPersistence: finished
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22c]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
multicored [000000042.111]:startup phase ending for 0
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]

в епром язык прописал куда дальше копать?

шлэшит с диска (СD). как сделать
Какой путь ?
''flashit -a 0x00040000 -d -f /mnt/sdcard10t1'' с флэшки понятно.
диск, монтировать ? Команды ?

drivskorpion писал(а):в епром язык прописал куда дальше копать?

могу восстановить.

Clark писал(а):шлэшит с диска (СD). как сделать
Какой путь ?
''flashit -a 0x00040000 -d -f /mnt/sdcard10t1'' с флэшки понятно.
диск, монтировать ? Команды ?

сделал, Cool....

renesis писал(а):Приветсвую всех
Есть Q7 3G High моя проблема такова, по глупости прошил eeprom 8R1035666_3GP
Получаеться тепер что в емердженси просит MU9498. Помогите люди добрые!

Зашил в 3g. епром от 3Gplus.
вентилятор постоянно крутится.
JTAG,оптика молчит.

Clark писал(а):Зашил в 3g. епром от 3Gplus.
вентилятор постоянно крутится.
JTAG,оптика молчит.

привалил V850

dec123ua писал(а):привалил V850

Вроде нет.
Вернул EPROM 3G.
Заработал.
Но как прошивать V850.
Вопрос остаётся открытый.

Clark писал(а):Вроде нет.
Вернул EPROM 3G.
Заработал.
Но как прошивать V850.
Вопрос остаётся открытый.

можно программатором например.

Подскажите прошивка 770 ее полный номер, кто нибудь, заранее спасибо

IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_08253A, built 2008/06/18_15-16-25_UTC]
CPU: SH7785 (>= 5th cut, clk mode 20. 4xDDR), 792MHz
RAM: 512 MB (probed, DBCONF=e30002)
FLASH: Spansion S29GL512N (32bit): 512 sectors x 256K
FPGA: PL_MMI3G_PLUS_FPGA_9411_D1_09422A
(0ms)
*** emergency FPGA loaded!
*** Old-fashioned mark found on IFS @0x1c0000: .zero=0x3000001a
starting image @1c0000 ...


Startup: PL_qnx_startup-sh7785_11292A, built 2011/07/19_08-03-38_UTC
RAM : 128 MB @0x08000000
RAM : 128 MB @0x40000000
RAM : 256 MB @0x50000000
FLASH: 128 MB @0x00000000
FPGA IRQ: Interrupt Controller ID:33 Ver:2.1.0 ILVL:7 Lines:255


System page at phys:0800a000 user:0800a000 kern:8800a000
Starting next program at v88046ae0
------------------------------------------------------
Welcome to QNX 6.3.2 (RL_qnx_os_632_PSP3_09423A) MMI3G Audi EMERGENCY SETUP 15325A
starting pci driver
*** init FPGA registers ***
[pcidma] PL_qnx_pcidma_FMod08363A_09274A, built 2009/07/02_11-10-37_UTC
starting dev-ipc for IOC
initialize IPC Driver
starting network driver
starting atapi driver - setup device /dev/cam0
starting devc-pty
Path=0 - XILINX ATAPI
target=0 lun=0 CD-ROM(5) - FJ-TEN DVD-ROM DV-05FT2 Rev: 1B20
Path=1 - XILINX ATAPI
target=1 lun=0 Direct-Access(0) - TOSHIBA MK6050GA Rev: TJ10
starting flash driver
starting SDCard driver
Path=0 -
target=0 lun=0 Direct-Access(0) - SU02G Rev: 8.0
Unable to access "/dev/io-net/en5" (2)
starting with no network driver
===========================================================
Emergency IFS is started. Emergency app tries to restore
the application.
===========================================================
49169 running /usr/bin/devg-NVTIRM
DMA is Disabled
dma disabled, interrupt thread priority = 100
49171 running /sbin/io-media-nvidia
49172 running /usr/sbin/io-display
49173 running /usr/apps/MMI3GEmergencyApp
===========================================================
Emergency shell started, fix your system and restart again
===========================================================
discplayer_init: IN
nvidia_render_manager_init: IN
INvmRenderManager::GetNvmRenderManager (&pRenderManager);
er = pRenderManager->Init(oConfig);
# Fpga header is not 0x4744482e (0xffffffff)!
App FPGA valid 0
Emergency FPGA valid 1
Disabling IOC watchdog


EmergencyApp-MMI3G: version 37.26.2098, date of build 07.08.2015
pRenderManager->Open()
nvidia_render_manager_init: OUT
discplayer_init: OUT
discplayer_init
discplayer_init: IN
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
discplayer_init: OUT
dvdtrackplayer_init
discplayer_init: IN
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
discplayer_init: OUT
dvdnavigator_init
created navigator control point with 8249288
mixer_init: IN
mixer_init: OUT
NvTRACELEVEL set to 3 (Level Info)
nVAudio_init: IN
nvidia_render_manager_init();
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
nVAudio_init: OUT
installing audio decoders
installing video decoders
nVAudio_init: IN
nvidia_render_manager_init();
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
nVAudio_init: OUT
OnIpcGetCaptureUnitSourceCount
Number of displays: 6
Number of layers: 9
Graphics init was successfull: DisplaySize is 800x 480
Set DisplayStatus to 2
OnOff: process IPC event HWsample 177 HWvariant 9 FinalShutdown 0
pidin ar devf-generics: /usr/sbin/devf-generic -r -b9 -t4 -p400,32 -s0x0,128m,,,,,,5000,100 -a . HW 177
SWDL: startUpdate HW index 177, variant 9309
OnOff: phase Scan metainfo
We have to erase the FPGA, init the FPGA persistence and delete the orphaned headers (if there are any).
OnOff: phase Erase
OnOff: Progress 000
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x40000
limit: 0x40000
Set DisplayStatus to 4
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 100
CEmergencySwdlDevCtrl::continueAfterEraseFpgaInitial
SWDL: Stopping EFS driver!
result of running command stop_efs_driver.sh is 0
SWDL: Starting EFS driver (automount)!
Set DisplayStatus to 6
result of running command start_efs_driver.sh is 0
(devf t1::f3s_table_find:247) fs0p3 corrupt U: 74
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!


CEmergencySwdlDevCtrl.cpp ASSERTION failed
SWDL persistence is not available!
useDefaultValuesForInfo: MU
FPGA info header @SWDL V1@
FPGA info version 1
FPGA info variant 9309
FPGA info type Main Unit
FPGA info HW index 21
FPGA info region <noRegion>
FPGA info step 0
FPGA info HW index IT 0
FPGA info ignore region/variant 1
FPGA info loop 0
FPGA info repeat 0
FPGA info CRC 5e17bb56
SWDL: Stopping EFS driver!
result of running command stop_efs_driver.sh is 0
SWDL: Starting EFS driver (automount)!
result of running command start_efs_driver.sh is 0
(devf t1::f3s_table_find:247) fs0p3 corrupt U: 74
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!


CEmergencySwdlDevCtrl.cpp ASSERTION failed
/HBpersistence/SWDL/update.txt doesn't exist
Copy of /HBpersistence/SWDL/update.txt.backup to /HBpersistence/SWDL/update.txt failed
Don't use update.txt
SWDL: Mount from medium 3 (0)
OnOff: variant 9309
OnOff: DeviceName MU9309
Src: Medialauncher is running
Src: mount failed. Retry once in 1 s
Src: Medialauncher is running
Src: mount failed (medium unavailable 2)
SWDL: mount failed
SWDL: Mount from medium 4 (1)
Src: Medialauncher is running
Src: mount OK
SWDL: mount OK
SWDL: open metainfo /metainfo2.txt
SWDL: open finished (84892)
OnOff: FileAccess for continues!
OnOff: Current file access type: read
SWDL: read finished (84892, 0)
SWDL: parse metainfo
SWDL: check signature and variant failed
SWDL: contAfterMetainfoError
SWDL: Mount from medium 5 (2)
Src: Medialauncher is running
Src: mount failed. Retry once in 1 s
Src: Medialauncher is running
Src: mount failed (medium unavailable 2)
SWDL: mount failed
SWDL: Mount from medium 2 (3)
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD ... still waiting...
Src: mount from CD failed - we give up
Src: mount failed (medium unavailable 2)
SWDL: mount failed
SWDL: No medium left!
OnOff: error No medium!!!
result of running command start_efs_driver.sh is 0
(devf t1::f3s_table_find:247) fs1p3 corrupt U: 74
Wait for HBpersistence...
Wait for HBpersistence...
Wait for HBpersistence...
Wait for HBpersistence...
Wait for HBpersistence...
Wait for HBpersistence...
Wait for HBpersistence...
Wait for HBpersistence...
Wait for HBpersistence...
Wait for HBpersistence...
HBpersistence is not available!

прячьте пожалуйста логи загрузки под спойлер.
внимательно посмотрите на этот кусок лога загрузки:
starting SDCard driver
Path=0 -
target=0 lun=0 Direct-Access(0) - SU02G Rev: 8.0
Unable to access "/dev/io-net/en5" (2)
starting with no network driver
================================================== =========
Emergency IFS is started. Emergency app tries to restore
the application.
================================================== =========

dec123ua писал(а):можно программатором например.

Подключение прям на плате делать ? Или выпаивать ?
Если на плате програмировать. 12В. В квадлок надо ?

Clark писал(а):Подключение прям на плате делать ? Или выпаивать ?
Если на плате програмировать. 12В. В квадлок надо ?

На Ваш вкус. Можно даже datasheet скачать и прочитать, для расширения кругозора.

hi. maybe someone could share small IFS for RNS850? when i load mine, it gives me error:
--- zmodem done: err=0, imaddr=0x8c000000
starting image @8c000000 ...

Startup: PL_qnx_startup-sh7785_09332A, built 2009/08/11_11-10-29_UTC
RAM : 128 MB @0x08000000
RAM : 128 MB @0x40000000
RAM : 256 MB @0x50000000
FLASH: 128 MB @0x00000000
FPGA IRQ: Interrupt Controller ID:18 Ver:18.18.18
FPGA IRQ: ERROR: Interrupt Controller not supported!
** STOP **


many thanks