MIB2 Delphi Recovery Mode

[Audianer2]

My Delphi MIB2 with SW 0891 does not open Telnet after wrong SWaP patch.
It doesn't even open telnet for a few seconds on startup.

Does anyone know how to enter emergency mode or even better read eMMC?
Some guys use JTag to read eMMC on Delphi MIB2. So it should be possible. Can anyone help?

I also would like to pay if someone can really help.

[Audianer2]

Nobody any idea?

[mobista]

Why U don’t desolder eMMC and then repair existing problem?

[Audianer2]

I've now desoldered the eMMC chip and have a dump of it.
Can I write a dump of a working unit or do I need to repair existing dump and then write it on eMMC?

[Kufik81]

If unit working normal than make update with this same firmware and user defined ( tic all components)

[Audianer2]

Sadly the unit is not working normal. Screen is black and Telnet is no longer available.
I need a solution to recover it

[Kufik81]

Make photo from mb pcb. 2 sites.

[mib2pmaster]

Recovery solution available.

[erzvag]

Is there anyone who can help with this?

[firefighter112]

Also looking for recovery solution . Anyone can help?

[mobista]

Also looking for recovery solution . Anyone can help?

solution is easy - just need to reverse steps U made with correct files.

[firefighter112]

Found solution. Now working perfect. Buy new Unit

[mobista]

Found solution. Now working perfect. Buy new Unit

Every wrongly patched device can be recovered from dead state.

[mibmaster]

@Mobista, even this ?

variant not implemented!!! 25

IPL for J6ECO RADIO hw revision: 7

Boot Mode 0

Start IPL Boot for variant: 25

variant not implemented!!! 25

IPL for J6ECO RADIO hw revision: 7

Boot Mode 0

Start IPL Boot for variant: 25

[mib2pmaster]

Sure

[Black Wolf]

paradox, "master" for mib, and can't fix by himself , than you are not master, but disaster

[mobista]

paradox, "master" for mib, and can't fix by himself , than you are not master, but disaster

Please master… tell us how to repair Bricked Delphi device? Do I need to have some bga soldering skills? Or can be done with simple ISP connection? I heard that U developed your own repairing solution via WiFi in your Pegasus!

[Black Wolf]

Why are you so nervous ? Not good profit still? Much difficult mh2p solve by dissasembly bga ? Relax yourself, don't take it so personally... It wasn't related to you, but mibmaster , or you are guy who try reply every single posts at forums, no other life ?

All you know = repairing mobile phones, and solder-desolder, bga, emmc , read-write by appropriate programmers. If you have enough skills, you'll know how, else writing usless posts "i can, you need send, all can be fixed" and hundreds more "danger" words ...

You don't know me, so you can't say anything about me, but your decide to show who are you by spaming all forums , those who need know my work, already know, don't need post hundreds post at every single forum CT,TQ,XDA-DEV, etc. , "can fix, send unit" etc. , so, less writing suggest you, more work, less nervous, more proofs .

Bye bye

[mobista]

Unlike you, I don't have to prove anything

[mibmaster]

paradox, "master" for mib, and can't fix by himself , than you are not master, but disaster

Oh welcome great i-know-everything-sucker! You came of your mother womb with complete knowlgedge of everything? Then let's hail you!

And disaster? It's you and your behaviour. The greatest disaster is that your father haven't spit his sperm into the toiled but into your mom.