Turbo Quattro

Добавлено: **Вс июн 28, 2020 9:43 pm**

Hi

I have a dead Delphi MIB2 Discover Media with a JY436 MTFC8GLWDM eMMc.
Because Telnet does no longer work I think that the last chance is to read the eMMc.
It is a JY436 MTFC8GLWDM eMMc but has 29 connectors to the PCB at the bottom which makes soldering nearly impossible.

I saw that there are solutions to read the eMMc with JTag. Does anyone know what's the best way to read the eMMc?

Добавлено: **Пн июн 29, 2020 3:34 pm**

Hello, please take a photo of the board

Добавлено: **Вт авг 04, 2020 4:36 pm**

You can't connect with UART?

Добавлено: **Вс авг 09, 2020 7:27 pm**

Here is a picture of the board @eprst

Вложение board.jpg больше недоступно

Добавлено: **Вс авг 09, 2020 7:27 pm**

I can connect with uart and see console output but Delphi does not allow uart input. So that doesn't help

Добавлено: **Вт авг 11, 2020 2:35 pm**

The jtag connection is on the other side of the pcb.

Добавлено: **Вт авг 11, 2020 3:16 pm**

Kufik81 писал(а):The jtag connection is on the other side of the pcb.

Here is a picture of the other side. Does that help?

Вложение Bildschirmfoto 2020-08-11 um 14.35.28.png больше недоступно

Добавлено: **Пт авг 14, 2020 5:45 pm**

ISP EMMC readout. Can someone share image of ANY emmc from delphi std unit? My emmc chip is corrupted

Добавлено: **Вс сен 06, 2020 7:48 pm**

Can someone share JTAG Pins locations eMMC on PCB for Delphi MIB2

Thanks

Добавлено: **Вт окт 27, 2020 10:08 pm**

I am also looking, no one can help

Добавлено: **Сб апр 10, 2021 2:19 pm**

Audianer2 писал(а):Here is a picture of the other side. Does that help?

[ATTACH=CONFIG]69112[/ATTACH]

Hello, did you managed to find jtag connection on the board ?

Добавлено: **Вт май 18, 2021 7:30 pm**

Hi
need jtag connection
thnks

Добавлено: **Вс июн 27, 2021 2:52 pm**

Full recovery solution exists but not free and not public.

Добавлено: **Вт июн 29, 2021 10:37 pm**

JTAG is useless - ISP is.

Добавлено: **Ср июн 30, 2021 6:27 pm**

With the right tools all options will help you do the job.
JTAG, custom boot, ISP and last step is chip remove.
Cheers.

Turbo Quattro

Delphi MIB2 read eMMc (JY436 MTFC8GLWDM)

Delphi MIB2 read eMMc (JY436 MTFC8GLWDM)