Turbo Quattro

I made an update in MIb2 system and forgot to not update the bose system.

And now no sound completely. Not quite. No sound.
I check with odis online, and unable to do the proper programming.
I said not good software.

Before update : MHI2_ER_AU57x_P3236 MU 670
After update : MHI2_ER_AU57x_P3634 MU 910

The bose is: 4G5035223D

Tired with VCP parameterization, but no zdc for this. The VCP guys said they try to get me..

I try to downgrade back, but I couldn't find the software.

So I asking for help if it's possible.

This file: MHI2_ER_AU57x_P3236 MU 670
Audi A6 2017


Or anything that helps.

Not asking for free, any remote help could be useful.

Thank You very much!

I wonder why it doesn't work! Maybe because it's a P Version (P3634). Only for production. Software MHI2_ER_AU57x_P3236 is not available!You can make an update to K3663 (4M0906961DA). http://pixelbytelab.com/mirrorserver/dav/Service42-MMI/Trade-Retail/Brand-ARAR Password is: L93SdFrN7[LEFT][LEFT]This is a officical update for your system. Use SWM Code in ODIS MHI2ER3663 and make an update with ODIS "Software Versions Management", not Red Menu.
I think it can works with bose Parameter only with SVM Code. Officical Software Updates works most with SVM Codes!
[/LEFT]

[/LEFT]

Hello,

Thank YOu.

I put the sd card to the 5F. Odis dont found it.
8gb Fat32.

Something special?

Update procedure with SVM Code in ODIS?
SVM Code must be valied for this procedure. They check online in ODIS.
I think must be work! It is a right update for your system.
I hope the old P3634 will not blocked by SVM.

Or you use following function in ODIS Online: Control module replace.
They will setting new parameter in 5F. But i don‘t know if it works with P3634.

And if don‘t work, you must start update in red menu and hope it works!
After Update, the mib system will make an online connection with odis.

P Software is for factory production.
K Software is a service update by dealer with ODIS Online.

car_driver писал(а):P Software is for factory production.
K Software is a service update by dealer with ODIS Online.

You are my man!! It works!!! Thank God, and You

Give me your paypal in pm for a little donation ;-)

How did it works? With replace function or Update with SVM code or red menu?
No problem for help!

car_driver писал(а):How did it works? With replace function or Update with SVM code or red menu?
No problem for help!

Update SVM code, and with red menu.

May I ask you how did you know there is newer firmware?

Thank You again

I have the same firmware on my car.

car_driver писал(а):I have the same firmware on my car.

Hello,

I'm looking for this software:

MHI2_ER_AU557x_S2570

The S is important

Thank You!

I have it all.

You need
[LEFT]4M0906961C > Update to K2519_2
[LEFT]4M0906961Q > Update to K25704M0906961DF > Update to "S" (S2519_1, S2570, S0040, .....)

I can send you if you need.[/LEFT][SUB][SUP]
[/SUP][/SUB][/LEFT]

rendezo писал(а):Hello,

I'm looking for this software:

MHI2_ER_AU557x_S2570

The S is important

Thank You!

The S version is just a script that gets run, it doesn't change MU software

hi, did you solve your problem?

Hello

What kind of script?

teamwiever and odis e

rendezo писал(а):Hello

What kind of script?

A crypted script, on the SD card, that gets decrypted and then updates pf.conf to disable telnet over Wifi and change some tuner settings. But MU software (ifs-root) is not changed by S version, so no real need.

bedrock писал(а):A crypted script, on the SD card, that gets decrypted and then updates pf.conf to disable telnet over Wifi and change some tuner settings. But MU software (ifs-root) is not changed by S version, so no real need.

Is it possible to get this script?

Thatsmy problem, the telnet is disabled I like to enable again

rendezo писал(а):Is it possible to get this script?

Thatsmy problem, the telnet is disabled I like to enable again

you fix your BOSE?