Страница 1 из 1
Get disk serial number of the command
Добавлено: Вт май 19, 2015 7:04 am
audijiJQ
Who knows this command, I didn't find it in Help。
Not the same as LINUX
Добавлено: Вт май 19, 2015 9:49 am
spinmar
Generally you will be able to find it with hdparm o smartctl. The last one is available for qnx 6.3
Otherwise you could try to see in dmesg: sometime OS will print it.
Bye
Добавлено: Ср май 20, 2015 1:56 pm
audijiJQ
spinmar писал(а):Generally you will be able to find it with hdparm o smartctl. The last one is available for qnx 6.3
Otherwise you could try to see in dmesg: sometime OS will print it.
Bye
I tried, seems to be invalid hdparm
Добавлено: Чт май 21, 2015 3:47 pm
audijiJQ
Вложение Screen_0_150521_2050_0034.png больше недоступно
I need this serial number ，but,hdparm and smartctl don't work
smartctl is a command line tool for controlling the SMART (Self-Monitoring, Analysis and Reporting Technology) features of hard disks and SSDs, and a component of Smartmontools. The objective of SMART[SUP][1][/SUP] is to monitor the reliability of hard disks and SSDs, as well as to give the ability to run certain drive tests. The Smartmontools[SUP][2][/SUP]include the command line tool smartctl and the smartd Daemon. The Smartmontools are available in a wide selection of our most popular operating systems (Darwin (Mac OS X), Linux, FreeBSD, NetBSD, OpenBSD, Solaris, OS/2, Cygwin, QNX, eComStation, Windows). The article, however, refers to the Linux version.
smartctl
-i
smartctl
-s on
smartctl
-a