hi everyone well i'm new to this great forum
I need your help I have bricked my MMI 3G
here is a scan with Putty I count on your my friends
thank you for accepting me among your
IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_08253A, built 2008/06/18_15-16-25_UTC]
CPU: SH7785 (>= 5th cut, clk mode 20. 4xDDR), 792MHz
RAM: 512 MB (probed, DBCONF=e30002)
FLASH: Spansion S29GL512N (32bit): 512 sectors x 256K
FPGA: PL_MMI3G_PLUS_FPGA_9411_D1_09422A
(0ms)
*** emergency FPGA loaded!
Entering CLI, type '?' or 'help' for help
=> scan
** @0x80100000: FPGA
total size: 746480 [0x0b63f0]
data: 746212 [0x0b62e4]
.FDR = PL_MMI3G_PLUS_FPGA_9411_D1_09422A
.FDU = Userinfos zu FPGA 9411_D1_4010_14lw
** @0x801c0000: IFS [vers.1, UCL, old EMERGENCY]
total size: 5182424 [0x4f13d8]
- header: 256
- startup: 53512
- imagefs: 12483108
RAM: 12536620 [0xbf4b2c]
=== DATA CHECKSUM ERROR! ===
** @0x87f00000: BIOS packet
total size: 786432 [0x0c0000]
BIOS pattern: FFFFFF7F.FFFFFFFF
App. pattern: FFFFFF7F.FFFFFFFF
=> boot 1c0000
starting image @801c0000 ...
Startup: PL_qnx_startup-sh7785_09332A, built 2009/08/11_11-10-29_UTC
RAM : 128 MB @0x08000000
RAM : 128 MB @0x40000000
RAM : 256 MB @0x50000000
FLASH: 128 MB @0x00000000
FPGA IRQ: Interrupt Controller ID:33 Ver:2.1.0 ILVL:7 Lines:255