MMX restore - HELP

[onyx4]

i have errace MMX.
Can i recording files eifs.img,mifs-stage1.img,mifs-stage2.img with command

flashit -p /net/mmx/fs0 -a 0x160000 -d -f /net/mmx/fs/sda0/eifs.img
flashit -p /net/mmx/fs0 -a 0x760000 -d -f /net/mmx/fs/sda0/mifs-stage1.img
flashit -p /net/mmx/fs0 -a 0xA60000 -d -f /net/mmx/fs/sda0/mifs-stage2.img

can I restore MMX this way?

[aleka]

You need JTAG
https://turbo-quattro.com/showthread...l=1#post642033

[onyx4]

what hardware is needed to do this

[aleka]

Any JTAG debugger, i use J-Link EDU https://www.segger.com/products/debug-p ... -link-edu/

[onyx4]

Can i use mmx_fs0 to recover or i need to make a clone of another MMX?

[aleka]

mmx_fs0 is enough.
After device founding via JTAG you also need cut off BCT file from dump mmx_fs0 in 0 to 17EF adresses, then load this BCT file to MIB with help of TegraRCM https://github.com/NVIDIA/tegrarcm . It work via USB.

Вложение USB.jpg больше недоступно

https://turbo-quattro.com/showthread.ph ... post642033

[onyx4]

Thank you for help me ,
I'm waiting for the hardware then I'll try

[hrdinaveliky]

How connect jtag to Technisat???

[mobista]

How connect jtag to Technisat???

What for?

[hrdinaveliky]

Could you share??

[eprst]

photo board?

[hrdinaveliky]

Yes please jtag no sd-card connection.

[eprst]

please photo your board Technisat

[hrdinaveliky]

ZR from PREH....the side??

[hrdinaveliky]

The same motherboard:
https://turbo-quattro.com/showthread.ph ... post641073

[eprst]

please give me the files you read

[eprst]

you are welcome))

[hrdinaveliky]

Thanks a lot!!

[hrdinaveliky]

How setup j-link??

Type of mcu??

[eprst]

MCIMX6D6AVT10AD