Hello,
Unit suddenly is dead and will stay rebooting IPL over and over
Unit shows this :
IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_08253A, built 2008/06/18_15-16-25_UTC]
CPU: SH7785 (>= 5th cut, clk mode 20. 4xDDR), 792MHz
RAM: 0 MB (probed, DBCONF=ff0101)
FLASH: Spansion S29GL512N (32bit): 512 sectors x 256K
FPGA: PL_MMI3G_PLUS_FPGA_9411_D1_09422A
(0ms)
*** emergency FPGA loaded!
closepd-fashioned mark found on IFS @0x1c0000: .zero=0x3000°
=== UNEXPECTED EXCEPTION #E0 !!!
- PC = 800032c4
- PR = 80003866
- SR = 600001f0
- R0 = 800032b0 R1 = 8801011f R2 = 88010000 R3 = 88010100
- R4 = 8801011d R5 = e500e008 R6 = d008 R7 = 1c0100
- R8 = 10000000 R9 = e500f2d8 R10 = 1c0000 R11 = 80006084
- R12 = 800033dc R13 = 100000 R14 = e5011e18 R15 = e5011e18
================================================================
IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_08253A, built 2008/06/18_15-16-25_UTC]
CPU: SH7785 (>= 5th cut, clk mode 20. 4xDDR), 792MHz
RAM: 0 MB (probed, DBCONF=ff0101)
FLASH: Spansion S29GL512N (32bit): 512 sectors x 256K
FPGA: PL_MMI3G_PLUS_FPGA_9411_D1_09422A
(0ms)
*** emergency FPGA loaded!
closepd-fashioned mark found on IFS @0x1c0000: .zero=0x3000°
=== UNEXPECTED EXCEPTION #E0 !!!
- PC = 800032c4
- PR = 80003866
- SR = 600001f0
- R0 = 800032b0 R1 = 8801011f R2 = 88010000 R3 = 88010100
- R4 = 8801011d R5 = e500e008 R6 = d008 R7 = 1c0100
- R8 = 10000000 R9 = e500f2d8 R10 = 1c0000 R11 = 80006084
- R12 = 800033dc R13 = 100000 R14 = e5011e18 R15 = e5011e18
================================================================
Any idea ?
BTW, 2x BGA 64mb have allready been renewed, same issue .
Thanks regards,