MMI 3G High (америка) без Sim ->MMI 3G High (америка) c Sim

FreeLikeAngel · Чт май 29, 2014 2:27 pm

Добрый день. Разбирал свою MMI 3G High и заметил, что на дополнительной плате MMI (что отвечает за слоты SD карт и BT) имеется распайка под установку держателя Sim карточки.
Возник вопрос. Возможно ли впаять держатель и заставить MMI поднимать интернет с неё? Или быть может для этого на основной плате не хватает какой-нибудь микросхемы и антенны для приема GSM сигнала? Если только антенны, я думаю не беда можно и её припаять.
Что скажите?

theed · Чт май 29, 2014 11:03 pm

It is not going to work, the unit needs a extra board attached to the mainboard (on the right side).
This board has the telit chip for wland and GSM/UMTS and the antenna connector.

energizer91 · Пт май 30, 2014 1:50 pm

so, maybe it can be possible to find out this chip and attach to mainboard so it will work?

darkeagle · Пт июл 18, 2014 3:48 pm

Hello All,
If I understand right on the MMI 3G without sim there are not the:
1) Sim card holder (can be soldered between the two SD card slots)
2) The GSM / UMTS telit module.

Anyone have more photos/ info regarding where the Telit module is located on a MMI3G with sim?
My MMI have not the SIM and I cannot dismount it to see which and where the GSM module is located.
Thks
D

bertelsmann · Пн июл 21, 2014 12:40 pm

Hi, this is what the GSM / UMTS Module Looks like.

Вложение umts-module2.jpg больше недоступно

if you open the unit - front side pointing to you -
it is located on the right side on the backside of the unit.
There is a small connector soldered to the board
where the module is plugged in.

darkeagle · Пн июл 21, 2014 12:56 pm

bertelsmann писал(а):Hi, this is what the GSM / UMTS Module Looks like.

[ATTACH=CONFIG]27959[/ATTACH]

if you open the unit - front side pointing to you -
it is located on the right side on the backside of the unit.
There is a small connector soldered to the board
where the module is plugged in.

Interesting.
So the module you taken in the picture in connected using a flat cable to the mainboard of the MMI right?
You have opened the module you taken in the picture? If yes could you post more pictures? I think it is a standard telit module....
Thanks
D

bertelsmann · Пн июл 21, 2014 1:10 pm

Hi, no, no flat cable module has the A connector on its left bottom
it is directely plugged onto the connector on the main pcb

sorry i do not have more pictures
the unit is already back in the car.

i do not think it is any standard module
the antenna connector is on the backside of the module
seems to be special made for the mmi unit.

regards
regards

energizer91 · Ср июл 30, 2014 7:58 am

maybe we can find this module in stores and connect it to MMI? googling PPIS UMTS and BE9449 gets only some pages, but none of them can sell it

theed · Чт окт 02, 2014 3:52 pm

It is the telit uc864-e (vendor=0x1bc7,device=0x1003), probably on a mother board and sealed in a metal case.
The module UC864-e is USB based, so maybey it is possible to use the other usb for data only.
For voice calling there have to be more lines connected.

Tschako · Пт окт 03, 2014 4:15 pm

In the HB Metal Case is located the standard Telit UC864-E Module-AUTO GSM Usage for Europe and in the NAR (US) Units it is an Telit UC864-AWS-AUTO. On the Free market, there is A way to buy the Telit print-mount units only (means without the HB Case) via the Telit distribution network.

theed · Пт окт 03, 2014 5:08 pm

is it possible to swap the internal UC864 unit in the metal case.
I have a NAR version and wantto have the EU version.

Tschako · Сб окт 04, 2014 1:07 pm

Yes, I think so. In Germany the UC864-E-AUTO costs around 150 EUR. The local distributors were listet on the Telit webside "www.telit.com" for each country.

After exchange of the GSM-unit you have to reflash the right MMI3GP software, means K0767 or K0770 depending of the MMI Unit.

Doofy · Вт фев 03, 2015 2:05 pm

Может кто знает. Машина из америки. Не ловит GSM сеть вообще.
Подойдет ли UC864-E-DUAL (http://www.aliexpress.com/item/UC864-E- ... 17578.html) вместоUC864-AWS-AUTOUC864-E-AUTO не могу нигде найти
Спасибо

theed · Ср фев 04, 2015 11:26 pm

I used a UC864-AWS, works also they are a littlebit easier to buy

Legoff · Пн фев 16, 2015 10:50 pm

у меня не подошел

Westyfield2 · Сб ноя 07, 2015 3:15 am

Has anyone replaced the Telit UC864?
I have seen adapter boards that should work with a Telit HE910 and LE910 which are faster. http://www.roundsolutions.com/shop/prod ... 64-H9.html and https://adaptivemodules.co.uk/index.cfm ... ct_ID/1055

Tschako · Сб ноя 07, 2015 3:57 pm

I´ve tried a little bit playing with the GSM modules. The next step must be to migrade to the EU LTE level with change of the module...
To modify the used AT command set in the relevant scripts should not be the problem.

Westyfield2 · Сб ноя 07, 2015 7:59 pm

Tschako писал(а):I´ve tried a little bit playing with the GSM modules. The next step must be to migrade to the EU LTE level with change of the module...
To modify the used AT command set in the relevant scripts should not be the problem.

I think we should try:

Telit HE910-G (21Mbps HSPA+ on frequency bands 800/850, 900, AWS 1700, 1900, 2100MHz) - http://www.telit.com/products/product-s ... 10-series/
Telit LE910-EUG (100Mbps LTE on frequency bands 800, 1800, 2600MHz & 42Mbps HSPA+ on frequency bands 850, 900, 2100MHz) - http://www.telit.com/products/product-s ... -series-1/
Telit LE910-EU V2 (150Mbps LTE on frequency bands 800, 900, 1800, 2100, 2600MHz & 42Mbps HSPA on frequency bands 900, 2100Mbps) - http://www.telit.com/products/product-s ... e910-v2-1/

All of these would require the adapter board. This is because UC864 used the 80pin connector, but xE910 use the LGA connector. The adapter board is available from:

Guides to using the adapter boards are here:

Who wants to be the first to try it?

Westyfield2 · Ср ноя 11, 2015 2:07 am

There are two other problems that need solving:

Telit UC864-E-AUTO has 1 antenna connector. The new models all have 2 or 3 antenna connectors. Can they work with only 1 antenna? Or can the antenna be split to connect the extra connectors?
Telit UC864-E-AUTO used a landing pad for its antenna using Rosenberger B2B connector 99CI106-030Z. This will need to be connected by microwave cable to the antenna port on the new model.

Doofy · Сб дек 19, 2015 12:50 pm

А у меня проблема осталась открытой. По прежнему не ловит сеть вообще! 3GP SIM USA
Ребята, подскажите! Все-таки какой модуль нужно купить, чтобы заработала сеть 3G.
Я даже готов заплатить, чтобы мне кто-нибудь сделал.
Audi Q7 2012 USA
Спасибо!