востановление поврежденных голов +/ damage head unit repair

a4ss4abt · Ср июл 22, 2015 12:01 am

IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_07412A, built 2007/10/09_12-19-44_UTC]
CPU: SH7785 (>= 5th cut, clk mode 20), 792MHz
RAM: 512 MB (probed, DBCONF=e30002)
FLASH: Spansion S29GL512N: 512 sectors x 256K
FPGA: PL_MMI3G_FPGA_9308_D1_08492A
(0ms)
*** emergency FPGA loaded!
*** Old-fashioned mark found on IFS @0x1c0000: .zero=0x3000001e
starting image @1c0000 ...

Startup: PL_qnx_startup-sh7785_08362A, built 2008/09/02_07-53-12_UTC
RAM : 256 MB @0x08000000
FLASH: 128 MB @0x00000000

System page at phys:0800a000 user:0800a000 kern:8800a000
Starting next program at v88046840
------------------------------------------------------
Welcome to QNX 6.3.2 (RL_qnx_os_632_PSP3_08124A) MMI3G Audi EMERGENCY SETUP 9308 D1 09431A
starting pci driver
*** init FPGA registers ***
starting dev-ipc for IOC
initialize IPC Driver
starting network driver
starting atapi driver - setup device /dev/cam0
Path=0 - XILINX MMI3G_8
target=0 lun=0 CD-ROM(5) - FJ-TEN DVD-ROM DV-04FT1 Rev: 1422
Path=1 - XILINX MMI3G_8
target=1 lun=0 Direct-Access(0) - TOSHIBA MK4036GA Rev: TA15
starting devc-pty
starting flash driver
starting SDCard driver
Path=0 -
target=0 lun=0 Direct-Access(0) - SD08G Rev: 5.1
Unable to access "/dev/io-net/en5" (2)
starting with no network driver
===========================================================
Emergency IFS is started. Emergency app tries to restore
the application.
===========================================================
49169 running /usr/bin/devg-NVTIRM
DMA is Disabled
dma disabled, interrupt thread priority = 100
49171 running /sbin/io-media-nvidia
49172 running /usr/sbin/io-display
49173 running /usr/apps/MMI3GEmergencyApp
===========================================================
Emergency shell started, fix your system and restart again
===========================================================
discplayer_init: IN
nvidia_render_manager_init: IN
INvmRenderManager::GetNvmRenderManager (&pRenderManager);
er = pRenderManager->Init(oConfig);
# Fpga header is not 0x4744482e (0xffffffff)!
App FPGA valid 0
Emergency FPGA valid 1
Disabling IOC watchdog

EmergencyApp-MMI3G: version 22.30.1642, date of build 14.10.2009
pRenderManager->Open()
nvidia_render_manager_init: OUT
discplayer_init: OUT
discplayer_init
discplayer_init: IN
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
discplayer_init: OUT
dvdtrackplayer_init
discplayer_init: IN
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
discplayer_init: OUT
dvdnavigator_init
created navigator control point with 8249288
mixer_init: IN
mixer_init: OUT
NvTRACELEVEL set to 3 (Level Info)
nVAudio_init: IN
nvidia_render_manager_init();
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
nVAudio_init: OUT
installing audio decoders
installing video decoders
nVAudio_init: IN
nvidia_render_manager_init();
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
nVAudio_init: OUT
OnIpcGetCaptureUnitSourceCount
Number of displays: 6
Number of layers: 9
Graphics init was successfull: DisplaySize is 800x 480
Set DisplayStatus to 2
OnOff: process IPC event HWsample 209 HWvariant 7 FinalShutdown 0
SWDL: startUpdate HW index 209, variant 9307
OnOff: phase Scan metainfo
FPGA info is complete. Orphaned headers are already deleted (if there were any).
scan for info: 40000: ff ff ff ff 92
scan for info: 40001: ff ff ff 92 29
scan for info: 40002: ff ff 92 29 92
scan for info: 40003: ff 92 29 92 29
scan for info: 40004: 92 29 92 29 40
scan for info: 40005: 29 92 29 40 53
scan for info: 40006: 92 29 40 53 57
scan for info: 40007: 29 40 53 57 44
scan for info: 40008: 40 53 57 44 4c
searchInfo 1
FPGA info header @SWDL V1@
FPGA info version 1
FPGA info variant 9307
FPGA info HW index MU 41
FPGA info region Europe
FPGA info step 0
FPGA info HW index IT 0
FPGA info ignore region/variant 0
FPGA info loop 0
FPGA info repeat 0
FPGA info CRC c4f9299d
SWDL: Stopping EFS driver!
slay: Unable to find process 'checkPersistence'
result of running command stop_efs_driver.sh is 0
SWDL: Starting EFS driver (automount)!
(devf t1::f3s_recover_boot:141) fs0p1 boot P[E0] U: 58
result of running command start_efs_driver.sh is 0
/HBpersistence/SWDL not found!
(devf t1::f3s_recover_boot:141) fs0p3 boot P[1A8] U: 74
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
/HBpersistence/SWDL not found!
Use update.txt from persistence
update.txt: CRC = bf6d8c04
update.txt: MetafileCRC = b324595b
update.txt: Use DSIv2 = true
update.txt: AssemblyID = 0
update.txt: ReleaseName = HNav_EU_K0257_5_D1
update.txt: Source = SD1
update.txt: Path = /
update.txt: ReleasePath =
update.txt: UseSubDir = 1
update.txt: MaxSubDir = 3
update.txt: CurrentStep = 1
update.txt: Phase3Device = MuIOC
update.txt: [DVD\0\Main\14\default\bootloader]=NO;0;default;0
update.txt: [DVD\0\Main\14\default\application]=TODO;1319424;default;1319680
update.txt: [MU9307\0\fpga\41\default\bootloader]=NO;0;default;0
update.txt: [MU9307\0\fpga\41\default\application]=TODO;1642;default;2020
update.txt: [MU9307\0\fpga-emg\41\default\bootloader]=NO;0;default;0
update.txt: [MU9307\0\fpga-emg\41\default\application]=NO;1642;default;1642
update.txt: [MU9307\0\ifs-emg\41\default\bootloader]=NO;0;default;0
update.txt: [MU9307\0\ifs-emg\41\default\application]=TODO;29;default;30
update.txt: [MU9307\0\ifs-root\41\default\bootloader]=NO;0;default;0
update.txt: [MU9307\0\ifs-root\41\default\application]=TODO;792;default;956
update.txt: [MU9307\0\efs-system\41\default\bootloader]=NO;0;default;0
update.txt: [MU9307\0\efs-system\41\default\application]=TODO;792;default;956
update.txt: [MU9307\0\efs-persist\41\default\bootloader]=NO;0;default;0
update.txt: [MU9307\0\efs-persist\41\default\application]=NO;324;default;324
update.txt: [MuIOC\0\Main\41\default\bootloader]=TODO;786;default;789
update.txt: [MuIOC\0\Main\41\default\application]=TODO;1368;default;1546
update.txt: [MuINIC\0\Main\41\default\bootloader]=NO;0;default;0
update.txt: [MuINIC\0\Main\41\default\application]=NO;17827601;default;17827601
update.txt: [DUA130\0\Front\41\default\bootloader]=NO;0;default;0
update.txt: [DUA130\0\Front\41\default\application]=NO;104;default;104
update.txt: [MuGPS\0\Main\41\default\bootloader]=NO;0;default;0
update.txt: [MuGPS\0\Main\41\default\application]=NO;500;default;500
update.txt: [MuTnrRef\0\data\0\default\File]=TODO;630;default;811
update.txt: [MUConsistency\0\Data\0\default\File]=TODO;47;default;143
update.txt: [sss\0\general\0\default\Dir]=NO;58;default;58
update.txt: [sss\0\recog de_DE\0\default\Dir]=NO;46;default;46
update.txt: [sss\0\recog en_GB\0\default\Dir]=NO;45;default;45
update.txt: [sss\0\recog es_ES\0\default\Dir]=NO;45;default;45
update.txt: [sss\0\recog fr_FR\0\default\Dir]=NO;45;default;45
update.txt: [sss\0\recog it_IT\0\default\Dir]=NO;46;default;46
update.txt: [sss\0\recog nl_NL\0\default\Dir]=NO;45;default;45
update.txt: [sss\0\recog pt_PT\0\default\Dir]=NO;45;default;45
update.txt: [sss\0\recog en_SA\0\default\Dir]=NO;45;default;45
update.txt: [sss\0\tts de_DE\0\default\Dir]=NO;35;default;35
update.txt: [sss\0\tts en_GB\0\default\Dir]=NO;32;default;32
update.txt: [sss\0\tts es_ES\0\default\Dir]=NO;32;default;32
update.txt: [sss\0\tts fr_FR\0\default\Dir]=NO;31;default;31
update.txt: [sss\0\tts it_IT\0\default\Dir]=NO;33;default;33
update.txt: [sss\0\tts nl_NL\0\default\Dir]=NO;32;default;32
update.txt: [sss\0\tts pt_PT\0\default\Dir]=NO;31;default;31
update.txt: [sss\0\tts en_SA\0\default\Dir]=NO;33;default;33
update.txt: [sss\0\tts ru_RU\0\default\Dir]=NO;34;default;34
update.txt: [MapStyles\0\ECE04\0\default\File]=NO;60;default;60
update.txt: [MapStyles\0\ME04\0\default\File]=NO;60;default;60
update.txt: [MapStyles\0\HM04\0\default\File]=NO;60;default;60
update.txt: [MapStyles\0\ASIA04\0\default\File]=NO;60;default;60
update.txt: [MapStyles\0\SA04\0\default\File]=NO;60;default;60
update.txt: [MapStyles\0\AN04\0\default\File]=NO;60;default;60
OnOff: variant 9307
OnOff: DeviceName MU9307
Import: Sourcepath = /, ReleasePath = , SubDir = 1/3, Step = 1
Src: Medialauncher is running
Src: mount OK
SWDL: mount OK
SWDL: open metainfo /metainfo2.txt
SWDL: open finished (19921)
OnOff: FileAccess for continues!
OnOff: Current file access type: read
SWDL: read finished (19921, 0)
SWDL: parse metainfo
SWDL: use metainfo
OnOff: region 'Europe'
Old image[0]: ipl 0, 0x0 0x40000
Old image[1]: fpga 1, 0x40000 0xc0000
Old image[2]: fpga-emg 2, 0x100000 0xc0000
Old image[3]: ifs-emg 5, 0x1c0000 0x4733ac
New image[0]: ipl 0, 0x0 0xf720
New image[1]: fpga 1, 0x40000 0xb63e8
New image[2]: fpga-emg 2, 0x100000 0xb63e8
New image[3]: ifs-emg 5, 0x1c0000 0x4733ac
New image[4]: ifs-root 3, 0x780000 0x231b10c
New image[5]: efs-extended 6, 0x3800000 0x1600000
New image[6]: efs-system 6, 0x4e00000 0x1400000
New image[7]: efs-persist 6, 0x6200000 0x1d00000
SWDL: Stopping EFS driver!
slay: Unable to find process 'checkPersistence'
result of running command stop_efs_driver.sh is 0
SWDL: Starting EFS driver (no automount)!
result of running command start_efs_driver.sh -a is 0
OnOff: Max images 8
SWDL: open file /MU9308/ifs-root/41/default/ifs-root.ifs
OnOff: image release version 2020
OnOff: image release version 1642
OnOff: image release version 30
dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x780000
limit: 0x40000
OnOff: image release version 956
SWDL: open finished (36811020)
OnOff: image name ifs-root
OnOff: image index 4
OnOff: phase Erase
OnOff: Progress 000

a4ss4abt · Ср июл 22, 2015 12:06 am

SWDL: read finished (524288, 0)
devctl(12,-2146694912,xx,12,0) returned 0SWDL: read finished (524288, 524288)
dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x7c0000
limit: 0x40000
SWDL: read finished (524288, 1048576)
SWDL: read finished (524288, 1572864)
SWDL: read finished (524288, 2097152)
SWDL: read finished (524288, 2621440)
SWDL: read finished (524288, 3145728)
devctl(12,-2146694912,xx,12,0) returned 0OnOff: Progress 001
dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x800000
limit: 0x40000
SWDL: read finished (524288, 3670016)
SWDL: read finished (524288, 4194304)
SWDL: read finished (524288, 4718592)
SWDL: read finished (524288, 5242880)
SWDL: read finished (524288, 5767168)
SWDL: read finished (524288, 6291456)
devctl(12,-2146694912,xx,12,0) returned 0OnOff: Progress 002
dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x840000
limit: 0x40000
SWDL: read finished (524288, 6815744)
SWDL: read finished (524288, 7340032)
SWDL: read finished (524288, 7864320)
SWDL: read finished (524288, 8388608)
SWDL: read finished (524288, 8912896)
SWDL: read finished (524288, 9437184)
devctl(12,-2146694912,xx,12,0) returned 0dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x880000
limit: 0x40000
SWDL: read finished (524288, 9961472)
SWDL: read finished (524288, 10485760)
SWDL: read finished (524288, 11010048)
SWDL: read finished (524288, 11534336)
SWDL: read finished (524288, 12058624)
SWDL: read finished (524288, 12582912)
devctl(12,-2146694912,xx,12,0) returned 0OnOff: Progress 003
dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x8c0000
limit: 0x40000
SWDL: read finished (524288, 13107200)
SWDL: read finished (524288, 13631488)
SWDL: read finished (524288, 14155776)
SWDL: read finished (524288, 14680064)
SWDL: read finished (524288, 15204352)
devctl(12,-2146694912,xx,12,0) returned 0SWDL: read finished (524288, 15728640)
OnOff: Progress 004
dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x900000
limit: 0x40000
SWDL: read finished (524288, 16252928)
SWDL: read finished (524288, 16777216)
SWDL: read finished (524288, 17301504)
SWDL: read finished (524288, 17825792)
SWDL: read finished (524288, 18350080)
devctl(12,-2146694912,xx,12,0) returned 0dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x940000
limit: 0x40000
SWDL: read finished (524288, 18874368)
SWDL: read finished (524288, 19398656)
SWDL: read finished (524288, 19922944)
SWDL: read finished (524288, 20447232)
SWDL: read finished (524288, 20971520)
SWDL: read finished (524288, 21495808)
devctl(12,-2146694912,xx,12,0) returned 0OnOff: Progress 005
dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x980000
limit: 0x40000
SWDL: read finished (524288, 22020096)
SWDL: read finished (524288, 22544384)
SWDL: read finished (524288, 23068672)
SWDL: read finished (524288, 23592960)
SWDL: read finished (524288, 24117248)
devctl(12,-2146694912,xx,12,0) returned 0SWDL: read finished (524288, 24641536)
OnOff: Progress 006
dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x9c0000
limit: 0x40000
SWDL: read finished (524288, 25165824)
SWDL: read finished (524288, 25690112)
SWDL: read finished (524288, 26214400)
SWDL: read finished (524288, 26738688)
SWDL: read finished (524288, 27262976)
SWDL: read finished (524288, 27787264)
devctl(12,-2146694912,xx,12,0) returned 0OnOff: Progress 007
dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xa00000
limit: 0x40000
SWDL: read finished (524288, 28311552)
SWDL: read finished (524288, 28835840)
SWDL: read finished (524288, 29360128)
SWDL: read finished (524288, 29884416)
SWDL: read finished (524288, 30408704)
SWDL: read finished (524288, 30932992)
devctl(12,-2146694912,xx,12,0) returned 0dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xa40000
limit: 0x40000
SWDL: read finished (524288, 31457280)
SWDL: read finished (524288, 31981568)
SWDL: read finished (524288, 32505856)
SWDL: read finished (524288, 33030144)
SWDL: read finished (524288, 33554432)
devctl(12,-2146694912,xx,12,0) returned 0SWDL: read finished (524288, 34078720)
OnOff: Progress 008
dev_fd == 12
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xa80000
limit: 0x40000
SWDL: read finished (524288, 34603008)
SWDL: read finished (524288, 35127296)
SWDL: read finished (524288, 35651584)
SWDL: read finished (524288, 36175872)
SWDL: read finished (110860, 36700160)
devctl(12,-2146694912,xx,12,0) returned 0OnOff: Progress 009
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xac0000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xb00000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 010
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xb40000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 011
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144

a4ss4abt · Ср июл 22, 2015 12:08 am

calling devctl with erase struct:
status: 0
offset: 0xb80000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 012
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xbc0000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xc00000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 013
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xc40000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 014
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xc80000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xcc0000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 015
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xd00000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 016
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xd40000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 017
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xd80000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xdc0000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 018
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xe00000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 019
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xe40000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xe80000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 020
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xec0000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 021
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xf00000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xf40000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 022
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xf80000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 023
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0xfc0000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0dev_fd == 11
OnOff: Progress 024
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x1000000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x1040000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 025
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x1080000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 026
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x10c0000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x1100000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 027
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x1140000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 028
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x1180000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0OnOff: Progress 029
dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x11c0000
limit: 0x40000
devctl(11,-2146694912,xx,12,0) returned 0dev_fd == 11
devctl returned 0
arrayinfo.unit_size 262144
calling devctl with erase struct:
status: 0
offset: 0x1200000
limit: 0x40000
closep
=== MANUAL RESET
- PC = 88009404
- PR = 8804a86e
- SR = 700000f0
- R0 = ffffffea R1 = c1 R2 = c1 R3 = 2cc
- R4 = 880817cc R5 = 97feb000 R6 = 30 R7 = c1
- R8 = 8804a812 R9 = fff R10 = 97834a20 R11 = 88009328
- R12 = c1 R13 = c1 R14 = 8804a778 R15 = 88009328
================================================================

IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_07412A, built 2007/10/09_12-19-44_UTC]
CPU: SH7785 (>= 5th cut, clk mode 20), 792MHz
RAM: 512 MB (probed, DBCONF=e30002)
FLASH: Spansion S29GL512N: 512 sectors x 256K
FPGA: PL_MMI3G_FPGA_9308_D1_08492A
(0ms)
*** emergency FPGA loaded!
*** Old-fashioned mark found on IFS @0x1c0000: .zero=0x3000001e
starting image @1c0000 ...

closep
=== UNEXPECTED EXCEPTION #180 !!!
- PC = 8801b53e
- PR = 8801479c
- SR = 400000f1
- R0 = 400000f0 R1 = 8801cc50 R2 = e500e498 R3 = ffeb0010
- R4 = 88013960 R5 = 1c0000 R6 = 100 R7 = 80009e30
- R8 = 4 R9 = 8801b540 R10 = c R11 = 8801cf00
- R12 = ffff R13 = 100000 R14 = e5011e2c R15 = 8801cc08
================================================================

IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_07412A, built 2007/10/09_12-19-44_UTC]
CPU: SH7785 (>= 5th cut, clk mode 20), 792MHz
RAM: 512 MB (probed, DBCONF=e30002)
FLASH: Spansion S29GL512N: 512 sectors x 256K
FPGA: PL_MMI3G_FPGA_9308_D1_08492A
(0ms)
*** emergency FPGA loaded!
*** Old-fashioned mark found on IFS @0x1c0000: .zero=0x3000001e
starting image @1c0000 ...

closep
=== UNEXPECTED EXCEPTION #180 !!!
- PC = 8801b53e
- PR = 8801479c
- SR = 400000f1
- R0 = 400000f0 R1 = 8801cc50 R2 = e500e498 R3 = ffeb0010
- R4 = 88013960 R5 = 1c0000 R6 = 100 R7 = 80009e30
- R8 = 4 R9 = 8801b540 R10 = c R11 = 8801cf00
- R12 = ffff R13 = 100000 R14 = e5011e2c R15 = 8801cc08
================================================================

IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_07412A, built 2007/10/09_12-19-44_UTC]

Crash-100 · Ср июл 22, 2015 10:02 am

a4ss4abt писал(а):No unfortunately it is dead....it begins the emergency update but it cannot finish!!!

)))))))))))))))))))))))))))))))))))))
Your devece have damaged 4 pcs 1GB DDR chip, you have to change them!

a4ss4abt · Ср июл 22, 2015 11:37 pm

Certainly not so easy to do!
I would understand where to find them also!!

Crash-100 · Пт июл 24, 2015 2:30 pm

inside MMI four black chip on the ball.

aboky · Пн авг 10, 2015 12:46 pm

Всем привет! MMI 3G после перезагрузки 3 кнопками( зависла навигация)- погасла, черный экран , подсветка не включается. Диагностика выдает ошибки нет коммуникации с 5F, Radio и Instrument Cluster. Но IC диагностируется! Может кто помочь советом?

Crash-100 · Пн авг 10, 2015 1:08 pm

aboky писал(а):Всем привет! MMI 3G после перезагрузки 3 кнопками( зависла навигация)- погасла, черный экран , подсветка не включается. Диагностика выдает ошибки нет коммуникации с 5F, Radio и Instrument Cluster. Но IC диагностируется! Может кто помочь советом?

я думаю нужно говорить о том, что ты делал до ресета!

aboky · Пн авг 10, 2015 7:56 pm

Crash-100 писал(а):я думаю нужно говорить о том, что ты делал до ресета!

Машина ехала начала зависать навигация перезагрузил, заработала.Через минут 10 снова заглючила перезагрузил и в ответ черный экран!

Deamoon · Чт авг 13, 2015 4:39 pm

Доброго времени суток всем. Ситуация похожая как постом выше, туарег RNS850, ехал человек, глючила нави, перезапустил сам клиент 3-4 раза, и все черный экран и нет связи) Есть у кого какие советы или предложения? Спасибо.

Crash-100 · Чт авг 13, 2015 6:22 pm

Совет один отдать тому, кто понимает, пишите, где находитесь территориально, возможно найдутся те, кто решит Вашу проблему.

Deamoon · Чт авг 13, 2015 7:17 pm

Готов поговорить об удаленном решении на коммерческой основе, в лс, программаторы всевозможные, инфракраска и руки имеются. Предложения в лс. Спасибо.

Crash-100 · Чт авг 13, 2015 8:36 pm

город

Deamoon · Чт авг 13, 2015 9:55 pm

Калининград

Hoto · Сообщение **Hoto** » Пн авг 17, 2015 7:18 pm

Добрый день
Нужен дамп с живой ММИ для 9308.

Ginny.kmv · Ср сен 23, 2015 6:42 pm

Привет !MMI 3G как говорят не доделаный 4E0035646 Что я уже голову сломал не получается нормального отзыва от головы . Зеленый экран гаснит при соединении и в терминале ересть полная . Помогите пожалййста

Crash-100 · Ср сен 23, 2015 6:49 pm

А что ты делал и что значит зеленый экран гаснет при соединении.

Ginny.kmv · Ср сен 23, 2015 7:00 pm

Мне такой автос пригнали . Клиент ни колется что делал , говорит просто утром зеленый экран увидел и все тут . на мотиторе надпись MMI3G EmApp 21.27.1642 AppFPGA in valid ! We will do nothing !
Я разобрал припоял три проводка и подключил к адаптору UART что нашел у нас в магазине видео наблюдения ) другого не было (
А в терминале ироглефы (
А гаснет при перезагрузке экран

Crash-100 · Ср сен 23, 2015 7:08 pm

пока проблем не вижу, все как и должно быть, режим восстановления, а терминал - разбирайся, проблема не в MMI.

Ginny.kmv · Ср сен 23, 2015 7:12 pm

Если все как и должно быть почему в флешки не начинатся обновление ? Может не то сую ?