then make a complete emg-update with the last FW in the SD slot. The unit should download all needed files and restarts fine... then make a normal FW update with the same version to fix all irregulars...
Should work...
a4ss4abt писал(а):Hi guys, i'm here again because I have an Audi 3G 9308 unit with a strange new problem, the unit is quite working for sometimes but after few minutes it begins to re-boot by itself, and if I connect by serial port it Begins A loop like the following One and I CAN not control it:
"IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_07412A, built 2007/10 / 09_12-19-44_UTC]
CPU: SH7785 ( > = 5th cut, clk mode 20), 792MHz
RAM: 512 MB (probed, DBCONF = e30002)
FLASH: Spansion S29GL512N: Sectors 512 x 256K
FPGA: PL_MMI3G_FPGA_9308_D1_08492A
(0ms)
*** Old-fashioned Mark found on IFS @ 0x1c0000: .zero = 0x3000001d
*** Old-fashioned Mark found on IFS @ 0x780000: .zero = 0x10000000
starting image @ 780000 ...
closep
=== UNEXPECTED EXCEPTION # 180 !!!
- PC = 8801b53e
- PR = 8801479c
- SR = 400000f1
- R0 = 400000f0 R1 = 8801cc50 R2 = e500e498 R3 = ffeb0010
- R4 = 88013960 R5 = 780000 R6 = 100 R7 = 80009e30
- R8 = 4 R9 = 8801b540 R10 = c R11 = 8801cf00
- R12 = ffff R13 = 40000 R14 = e5011e2c R15 = 8801cc08
=============================================== =================
IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_07412A, built 2007/10 / 09_12-19-44_UTC]
CPU: SH7785 (> = 5th cut, clk mode 20), 792MHz
RAM: 512 MB (probed, DBCONF = e30002)
FLASH: Spansion S29GL512N: Sectors 512 x 256K
FPGA: PL_MMI3G_FPGA_9308_D1_08492A (0ms)
*** Old-fashioned Mark found on IFS @ 0x1c0000: .zero = 0x3000001d
*** Old-fashioned Mark found on IFS @ 0x780000: .zero = 0x10000000
starting @ 780000 image ... "
closep
=== UNEXPECTED EXCEPTION # 180 !!!"
Please Look at the log joint here
many many thanks for your help