Может есть у кого обновления для данного устройства, не могу найти.
Подключился в терминале, не могу найти скорость обмена, может есть у кого информация!
Может есть у кого обновления для данного устройства, не могу найти.
Подключился в терминале, не могу найти скорость обмена, может есть у кого информация!
Последний раз редактировалось Crash-100; 22.01.2015 в 15:12.
Если кому еще нужно вот ссылка https://cloud.mail.ru/public/0ad32cb...erProFW200.zip
Спасибо, очень помогло!!!
Log с дохлой башки. ))
кто грызет этот орех, пишите в лс
Стоит пароль на выполнения команд
nVidia Quickboot 12.0127U (Build Jun 25 2012)
modified by e.Solutions GmbH
Press <E> to run Emergency Flash Utility.
VFPv3: fpsid=41033091
coproc_attach(10): replacing fe066d20 with fe07cfcc
coproc_attach(11): replacing fe066d20 with fe07cfcc
юIFS Loader (Build Jul 18 2012)
Copyright (c) 2011 e.solutions GmbH. All rights reserved.
handling first frame
[ 0:00.568 OOC INFO ]: IOC -> new MMI state: 0xe, last on flag: 1
[ 0:00.569 OOC INFO ]: IOC -> clamp S/15: 0/0
[ 0:00.569 OOC INFO ]: IOC -> startup variant: 0x0
start mode = 1
IRC: /net/rcc/dev/irc couldn't be opened!
IRC: /net/rcc/dev/irc couldn't be opened!
IRC: /net/rcc/dev/irc couldn't be opened!
IRC: /net/rcc/dev/irc couldn't be opened!
IRC: /net/rcc/dev/irc couldn't be opened!
IRC: /net/rcc/dev/irc couldn't be opened!
rp0 ok
rp1 ok
translations done
checking rootportsPCIe Rootport 0 link up timed out
.PCIe Rootport 0 link up timed out
.PCIe Rootport 0 link up took 90ms
PCI endpoint (0xb800104c) is on bus = 1, device = 0
assigning resources
assigning resources
PCIe bridge/Root port
Vendor/Device = 0xbf010de bus = 0 sec bus 1 sub bus 1
class 0x00060000 revision a0
bar(2) 32 Bit
start = 83000010
end = 83000010
size = 0
flags = I/O
bar(3) 32 Bit
start = 90000000
end = 90010000
size = 0
flags = Memory
bar(4) 32 Bit
start = a0000000
end = a0001000
size = 0
flags = Prefetch
PCIe device
Vendor/Device = 0xb800104c bus = 1 sec bus 0 sub bus 0
class 0x00078000 revision 00
bar(0) 32 Bit
start = a0000000
end = a0000fff
size = 1000
flags = Prefetch
bar(1) 32 Bit
start = 90000000
end = 90003fff
size = 4000
flags = Memory
bar(2) 32 Bit
start = 90004000
end = 90007fff
size = 4000
flags = Memory
bar(3) 32 Bit
start = 90008000
end = 9000bfff
size = 4000
flags = Memory
bar(4) 32 Bit
start = 9000c000
end = 9000ffff
size = 4000
flags = Memory
Image mounted successfully.
Image size: 52406220 bytes
Transfer time: 1.038999 s
Transfer speed: 48.102518 MB/s
login: Path=0 - Generic SDHCI
target=0 lun=0 Direct-Access(0) - MMC:144 HYNIX Rev: 7.3
Mapped 6000D000h to 28000000
NAD is 1
PPIS Startup Sequence (takes ~2s)
Path=0 - Generic SDHCI
Path=0 - Generic SDHCI
Setting deva-nvaudio priority: 21
Setting deva-nvaudio dma interrupt priroity: 26
Path=0 -
target=0 lun=0 Direct-Access(0) - ram Rev:
IRC: /net/rcc/dev/irc couldn't be opened!
MMX BENCH_Startup IMG_VER #SOP1_VW_EU_086PROD 790
Driver settings: Thread priority = 15 TVMR get frame timeout (msecs) = 120
Display width = 800 Display height = 480
Verbosity level = 0
CHALLENGE: Running on port 22111.
RAM_DISK too small for SWDL, starting HMI normally...
IRC: /net/rcc/dev/irc couldn't be opened!
IRC: /net/rcc/dev/irc couldn't be opened!
SLF: 00:00:00.044 43690 0 2 devg-nvrm: Starting thread pool loop
SLF: 00:00:00.045 43690 0 2 Chip Id: 0x20 (Handheld SOC) Major: 0x1 Minor: 0x4 SKU: 0x2c
SLF: 00:00:00.072 43690 0 2 NVRM Initialized shmoo database
SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: PLLX0: 900000 Khz
SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: PLLM0: 666000 Khz
SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: PLLC0: 600000 Khz
SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: PLLP0: 216000 Khz
SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: PLLA0: 11289 Khz
SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: CPU: 900000 Khz
ls /dev
login:root
Password:
Login incorrect
SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: AVP: 240000 Khz
SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: System Bus: 240000 Khz
SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: Memory Controller: 333000
From software 0100 till 0200 is possible start any script form engineering menu: mmx/navigation/ebnav/ebonly/tester-scripts/SW Update - SKODA Style. On SD card this script has to be in folder: swdl\scripts\ name of file: sw_update. Engineering menu could by setup by VCP -> 5F -> switch to enginnering mode -> adaptation -> development mode -> enable -> Save and Restart unit. This is small example with flash files from test unit(update has not finished correctly with these files - could you see in log: swdl.sk.log. http://ulozto.net/x75ZhyYX/mib-unofficiall-update-zip
Последний раз редактировалось hrdinaveliky; 26.02.2015 в 17:06.
your device not work ?
you can't flash IOC and Inic without switching in bolomode
May be you have login and password to acsses
I have now unit on CAN but display is black...i see like very interested:
Press <E> to run Emergency Flash Utility.
my vesrion is high and in emagency login too
How connect to unit??? How port use for connection?? 851??
Последний раз редактировалось hrdinaveliky; 27.02.2015 в 00:09.
Есть Discovery Pro, вдруг стала сама перезагружаться, хочу сделать через Emergency Flash Utility обновления, но он просит файлы в архиве, может кто располагает информацией пишите в л.с
Hi guys, until the SW release P1048 EU, the MIB 1 works with SD scripts, if they are correct coded...
Newer SW version need a signature with hash etc.
maybe, there are seperate emg updates available for the MMX and the RCC clusters. I have seen a function of the mergency update in the green eng menu...
I will try to send you the call behind the engdefs entry...
see this activate_efu.sh
.................................
echo -n "Invalidating boot partition... "
dd if=/dev/zero of=/dev/fs0 seek=59 bs=131072 count=1 > /dev/null 2>&1
echo "done."
echo "Emergency Flash Utility will start on next boot."
echo
echo "If the emergency update doesn't start please check that"
echo "the SD card also contains the 'update***.dat'-files."
echo "These files are provided with every build in the file"
echo "UPD_NORMAL_<VERSION_NAME>.zip
There is a batch in a MIB1 ENG unit calls "activate_efu.sh" efu means "Emergency Flash Update"
content of this batch as follows:
#/bin/sh
echo -n "Invalidating boot partition... "
dd if=/dev/zero of=/dev/fs0 seek=59 bs=131072 count=1 > /dev/null 2>&1
echo "done."
echo "Emergency Flash Utility will start on next boot."
echo
echo "If the emergency update doesn't start please check that"
echo "the SD card also contains the 'update***.dat'-files."
echo "These files are provided with every build in the file"
echo "UPD_NORMAL_<VERSION_NAME>.zip"
But be aware of the result. This script is from an engineering sample, I dont know whats happend with a production unit!!!!
Hey, your are faster with tipping in...
Thats what I mean before
where i can find UPD_NORMAL_<VERSION_NAME>.zip ?????
I have to search for it in the FW files... Ill come back with findings...