Delphi P0879D solution
Добро пожаловать на Turbo Quattro.
Показано с 1 по 14 из 14
  1. #1

    По умолчанию Delphi P0879D solution

    Hello...
    Anyone have solution for this?
    Does anyone sell solution for Delphi, not just patch files?


    Thank You!!!

  2. #2
    Местный
    Регистрация
    22.03.2017
    Сообщений
    107

    По умолчанию

    I don’t understand U - if U have patched files why don’t do reverse engineering and get solution ?

  3. #3

    По умолчанию

    Because patched files have somesort of CRC in FF FF area. Last time I tried, this resulted in Blue Screen which was restored with original SW.

  4. #4
    Пользователь
    Регистрация
    20.11.2019
    Адрес
    UK
    Сообщений
    73

    По умолчанию

    I can even teach you basics. All you need to know about Delphi and not only.

  5. #5
    Местный
    Регистрация
    22.03.2017
    Сообщений
    107

    По умолчанию

    Why U don’t try to reverse which checksum system was used?

  6. #6
    Пользователь
    Регистрация
    05.10.2019
    Сообщений
    31

    По умолчанию

    CRC checksum for what, feature activation? That's not needed!
    Slay the original SWaP and launch your patched SWaP from sdcard and that's it.
    Reboot the unit and you're done!
    At least I'm doing it this way and never had any problem...

  7. #7

    По умолчанию

    Today after many months I tried again.
    I unpacked delphibin.ifs and did needed modifications to SWaP region and repacked.
    Everything works OK for 5Min(Incl. AppConnect, Maps etc....), then reboots into Blue Emergency Mode and starts recovering. I don't see what I've done wrong.

    With restart I'm able to use again 5min then EFU and so on....so on.....
    Any hint will be appreciated!

  8. #8
    Пользователь
    Регистрация
    05.10.2019
    Сообщений
    31

    По умолчанию

    P0879 has disabled telnet. How did you copy the modified delphibin.ifs into the unit?

  9. #9

    По умолчанию

    Цитата Сообщение от mibmaster Посмотреть сообщение
    P0879 has disabled telnet. How did you copy the modified delphibin.ifs into the unit?
    I didn't do on P0879, but P0231D.

    I had similar fault with different train, but can't remember which.

  10. #10
    Местный
    Регистрация
    22.03.2017
    Сообщений
    107

    По умолчанию

    Цитата Сообщение от magna413 Посмотреть сообщение
    Today after many months I tried again.
    I unpacked delphibin.ifs and did needed modifications to SWaP region and repacked.
    Everything works OK for 5Min(Incl. AppConnect, Maps etc....), then reboots into Blue Emergency Mode and starts recovering. I don't see what I've done wrong.

    With restart I'm able to use again 5min then EFU and so on....so on.....
    Any hint will be appreciated!
    Hint: If U don’t know know how to this - leave it for professionals!

  11. #11
    Пользователь
    Регистрация
    05.10.2019
    Сообщений
    31

    По умолчанию

    @magna:
    As I wrote before - don't touch the original files, it's not necessary! Activation can be made very easily, just run the SWaP from SD card. Delete the *.fec files from all of the subdirs in /persistence/SWaP, then slay original SWaP, then copy your modified FEC file to /persistence/SWaP/pg directory and then run your patched SWaP in console from sd card. Let it run for 3-5 seconds, then press CTRL+Z, then reboot the unit using shutdown -S reboot.
    After the reboot your unit will have enabled all the codes from your FEC file and the watchdog won't be triggered, as the system files were not modified.

  12. #12
    Новичок
    Регистрация
    24.01.2019
    Сообщений
    19

    По умолчанию

    What is the command to run the patch swap

  13. #13
    Пользователь
    Регистрация
    08.04.2019
    Сообщений
    35

    По умолчанию

    how enable telnet in version 05XX ??

  14. #14
    Местный
    Регистрация
    22.03.2017
    Сообщений
    107

    По умолчанию

    Цитата Сообщение от chris2011 Посмотреть сообщение
    how enable telnet in version 05XX ??
    U mean US 05xx?

 

 

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Back to top