Delphi MIB2 read eMMc (JY436 MTFC8GLWDM)
Добро пожаловать на Turbo Quattro.
Показано с 1 по 15 из 15
  1. #1

    По умолчанию Delphi MIB2 read eMMc (JY436 MTFC8GLWDM)

    Hi

    I have a dead Delphi MIB2 Discover Media with a JY436 MTFC8GLWDM eMMc.
    Because Telnet does no longer work I think that the last chance is to read the eMMc.
    It is a JY436 MTFC8GLWDM eMMc but has 29 connectors to the PCB at the bottom which makes soldering nearly impossible.

    I saw that there are solutions to read the eMMc with JTag. Does anyone know what's the best way to read the eMMc?

  2. #2
    Местный
    Регистрация
    21.04.2014
    Адрес
    Курск
    Сообщений
    131

    По умолчанию

    Hello, please take a photo of the board

  3. #3
    Новичок
    Регистрация
    10.07.2020
    Адрес
    Denmark
    Сообщений
    2

    По умолчанию

    You can't connect with UART?

  4. #4

    По умолчанию

    Here is a picture of the board @eprst

    board.jpg

  5. #5

    По умолчанию

    I can connect with uart and see console output but Delphi does not allow uart input. So that doesn't help

  6. #6

    По умолчанию

    The jtag connection is on the other side of the pcb.

  7. #7

    По умолчанию

    Цитата Сообщение от Kufik81 Посмотреть сообщение
    The jtag connection is on the other side of the pcb.
    Here is a picture of the other side. Does that help?

    Bildschirmfoto 2020-08-11 um 14.35.28.png

  8. #8
    Новичок
    Регистрация
    03.03.2020
    Сообщений
    20

    По умолчанию

    ISP EMMC readout. Can someone share image of ANY emmc from delphi std unit? My emmc chip is corrupted
    Изображения Изображения

  9. #9
    Новичок
    Регистрация
    04.11.2010
    Адрес
    Lithuania
    Сообщений
    22

    По умолчанию

    Can someone share JTAG Pins locations eMMC on PCB for Delphi MIB2

    Thanks

  10. #10
    Новичок
    Регистрация
    06.05.2020
    Сообщений
    12

    По умолчанию

    I am also looking, no one can help

  11. #11

    По умолчанию

    Цитата Сообщение от Audianer2 Посмотреть сообщение
    Here is a picture of the other side. Does that help?

    Bildschirmfoto 2020-08-11 um 14.35.28.png
    Hello, did you managed to find jtag connection on the board ?

  12. #12
    Новичок
    Регистрация
    18.05.2021
    Адрес
    lviv
    Сообщений
    1

    По умолчанию

    Hi
    need jtag connection
    thnks1.jpg2.jpg

  13. #13
    Пользователь
    Регистрация
    20.11.2019
    Адрес
    UK
    Сообщений
    73

    По умолчанию

    Full recovery solution exists but not free and not public.

  14. #14
    Местный
    Регистрация
    22.03.2017
    Сообщений
    107

    По умолчанию

    JTAG is useless - ISP is.

  15. #15
    Пользователь
    Регистрация
    20.11.2019
    Адрес
    UK
    Сообщений
    73

    По умолчанию

    With the right tools all options will help you do the job.
    JTAG, custom boot, ISP and last step is chip remove.
    Cheers.

 

 

Метки этой темы

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Back to top