Technisat - black screen
Добро пожаловать на Turbo Quattro.
Показано с 1 по 19 из 19
  1. #1
    Пользователь
    Регистрация
    13.06.2014
    Сообщений
    47

    По умолчанию Technisat - black screen

    I have a trouble with Technisat:
    Starting tsd.mibstd2.main.root...


    -Welcome to TechniBoot-
    SVN Rev: 626459
    Loading Emergency updater...
    J5e.imx6.start: 0x00741B69
    J5e.imx6.start: 0x01D41093
    J5e.M30.LoadImage.ready: 0x03D92549
    J5e.QNX.LoadImage.ready: 0x0CDB3BB4
    CPU0: L1 Icache: 512x64
    CPU0: L1 Dcache: 512x64 WB
    CPU0: L2 Dcache: 4096x64 WB
    CPU0: VFP-d32 FPSID=410330c3
    CPU0: NEON MVFR0=11110222 MVFR1=00011111
    CPU0: 413fc082: Cortex A8 rev 2 600MHz NOALIGN
    Loading IFS...decompressing...done


    System page at phys:832d5000 user:fc404000 kern:fc404000
    Starting next program at vfe05060c
    cpu_startnext: cpu0 -> fe05060c
    VFPv3: fpsid=410330c3
    coproc_attach(10): replacing fe080d90 with fe08054c
    coproc_attach(11): replacing fe080d90 with fe08054c
    !!!Emergency!!! - Welcome to QNX Neutrino on the Texas Instruments J5 ECO MIBSTD2_MAIN (ARMv7 Cortex-A8 Core)
    J5e.QNX.init.ready
    Unable to access /dev/name/gns_client
    Starting tsd.mibstd2.main.root...
    00:00:05.268 [Info] [mcp] [FREQ:20000000]
    00:00:05.271 [Info] [mcp] [PERF:0x648c9cf:IO1] J5e.MCP.init.start
    00:00:05.286 [Info] [mcproot] CM is restricted



    and no more....black screen.

    Please help.

    How use:
    7 - enable imx6 USB and release imx6 from reset
    ??

    Exist some way how connect USB to the unit????

  2. #2

    По умолчанию

    Write compleated root HMI to unit this same SW

  3. #3

    По умолчанию

    I have the same problem.
    The same SW is not available -P0359. Can I use HMI from different SW I have available -P0363.

  4. #4

    По умолчанию

    Цитата Сообщение от vag-flashdaten Посмотреть сообщение
    I have the same problem.
    The same SW is not available -P0359. Can I use HMI from different SW I have available -P0363.
    try upload by emergency mode file startup than via terminal read and upload hmi

  5. #5

    По умолчанию

    Emergency does not start. I get this message (like on post 1) when emergency is trying to start.

  6. #6

    По умолчанию

    you try reset Update container??

  7. #7
    Пользователь
    Регистрация
    13.06.2014
    Сообщений
    47

    По умолчанию

    Emergency mode is out of range - all stopped on this message:

    Got an exception: socket failed
    .
    This should not have happened. Your device is now broken. You now own both halves.

  8. #8
    Местный
    Регистрация
    22.03.2017
    Сообщений
    107

    По умолчанию

    Show photo of sticker.

  9. #9
    Пользователь
    Регистрация
    13.06.2014
    Сообщений
    47

    По умолчанию

    Why??

  10. #10

  11. #11
    Пользователь
    Регистрация
    13.06.2014
    Сообщений
    47

    По умолчанию

    The same question....

  12. #12

    По умолчанию

    Цитата Сообщение от hrdinaveliky Посмотреть сообщение
    The same question....
    Please clear your inbox. I would like to send you PM

  13. #13
    Местный
    Регистрация
    22.03.2017
    Сообщений
    107

    По умолчанию

    Цитата Сообщение от hrdinaveliky Посмотреть сообщение
    Why??
    I wantrd to Check If I have dump file for your device.

  14. #14

    По умолчанию

    Цитата Сообщение от mobista Посмотреть сообщение
    I wantrd to Check If I have dump file for your device.
    And? You have it?
    I just got another working unit with 2XX firmware H25. I'm thinking of making a copy of eMMC and putting it to my broken 3XX. Will that work?

  15. #15
    Пользователь
    Регистрация
    13.06.2014
    Сообщений
    47

    По умолчанию

    Try it now...

  16. #16

    По умолчанию

    Ok. Left that unit on the shelf for a while, now time to get it fixed.

    Flashed eMMC with dump from working unit, still the same. Replaced eMMC, still the same.

    When jumped two pins on MB, menu comes up but after pressing 2 and restart unit shows log as in post 1 and stops.

    Any help will be appreciated.

  17. #17
    Пользователь
    Регистрация
    08.04.2019
    Сообщений
    35

    По умолчанию

    i have exactly the same fault, problem is on my unit short circuit in MMC i get no vss to mmc, blown transistor

  18. #18

    По умолчанию

    Цитата Сообщение от chris2011 Посмотреть сообщение
    i have exactly the same fault, problem is on my unit short circuit in MMC i get no vss to mmc, blown transistor
    Can you show which one?

  19. #19

    По умолчанию

    You get this error when the i.MX is dead, you have to replace the mcimx6d6avt to make the system boot again. The problem is the efuse configuration from the old i.MX, I havent been able to get everything working when replacing the processor.

 

 

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Back to top