Search to convert mib 2 to mib2.5
Добро пожаловать на Turbo Quattro.
Показано с 1 по 17 из 17
  1. #1
    Пользователь
    Регистрация
    17.10.2019
    Сообщений
    33

    По умолчанию Search to convert mib 2 to mib2.5

    Hello

    I search to convert solution for mib 2 3g0 harman to 5na.

    I need also différents firmware for mib2

    I pay for that

  2. #2
    Пользователь
    Регистрация
    17.10.2019
    Сообщений
    33

    По умолчанию

    Привет

    Я ищу, чтобы преобразовать решение для MIB 2 3g0 Харман 5na.

    Мне также нужны разные прошивки для mib2

    Я плачу за это

  3. #3
    Пользователь
    Регистрация
    17.10.2019
    Сообщений
    33

    По умолчанию

    Anybody

  4. #4
    Пользователь
    Регистрация
    17.10.2019
    Сообщений
    33

    По умолчанию

    ???

  5. #5
    Пользователь
    Регистрация
    13.07.2018
    Адрес
    EU
    Сообщений
    66

    По умолчанию

    I can do it.

  6. #6
    Пользователь
    Регистрация
    17.10.2019
    Сообщений
    33

    По умолчанию

    I would like solution

  7. #7

    По умолчанию

    I'll join you. There is interest.

  8. #8

    По умолчанию

    Fix train and MNAND partition.

  9. #9

    По умолчанию

    I have solution. Would like to exchange vs other solution packs, like Delphi or Technisat/Preh or MIB2p

  10. #10
    Новичок
    Регистрация
    23.08.2017
    Адрес
    Москва
    Сообщений
    25

    По умолчанию

    Do you have partition script for MIB2.5 or partition information from FDISK utilite?

  11. #11

    По умолчанию

    Hello !
    I am very interested in this topic, tell me where you can study this topic.

  12. #12
    Новичок
    Регистрация
    11.08.2020
    Адрес
    Chile
    Сообщений
    11

    По умолчанию

    oi eu tenho informação

  13. #13

    По умолчанию

    Are you still interested in solution ? Can exchange with mib2p

  14. #14
    Пользователь
    Регистрация
    20.11.2019
    Адрес
    UK
    Сообщений
    62

    По умолчанию

    What a good offer

  15. #15

    По умолчанию

    i can do mib 2 to 2.5 in 30 min )

  16. #16

    По умолчанию

    Convert MIB2 High (Harman) to MIB2.5
    for 9.2” Display
    Do at your own risk! You can brick the unit!
    Note: it is possible that something is missing in this manual or different
    for other firmware versions!

    Setup unit on bench - Connect to RCC via UART
    • Make Full (Advanced) Backup with M.I.B. to SD Card | http://mib.mibsolution.one
    • Save Backup of SD Card on PC
    • Format SD Card with FAT32 and Load MIB2.5 (G13) Firmware, Insert into SD1 on Unit
    • Using E2PTool Program and D-Link (or UART Terminal) change part number and SW train to
    fit MIB2.5 for brand and region (example for VW, 5NA035047 & MHI2_ER_VWG13_Pxxxx)
    • Reboot Unit (hold power button for 30 seconds)
    • Enter SWDL via Service Mode , Select Manual Download
    Select MIB2.5 Firmware Update and Select ALL (all parts should say YES)
    • Start Update
    • Let Update Flash, at some point unit will enter RCC Emergency (some units update will fail at
    MMX_App, at this point unit will restart. As soon as unit powers back on short UART RCC Tx
    to GND, in UART terminal press key within 5 seconds to enter Command Line. Type “boot -t
    emerg” and press enter to enter RCC Emergency)

    NOTE: You MUST switch to 9.2” screen for Display to show at this point!

    • As soon as BLUE RCC Emergency Screen is displayed with countdown timer, enter root as
    login and MIB2.5 Firmware RCC Password then “slay -9 MIBEmergency” into UART Terminal
    to stop countdown.

    NOTE: This can be tricky and must be done before Countdown timer finishes, if you need to try again reboot unit
    and enter RCC Emergency once again

    • With Countdown Timer Stopped Enter Following Commands in order via UART Terminal:

    mount -uw /net/mmx/fs/sda0/
    on -f mmx sh
    fdisk /dev/mnand0
    (fdisk will start, unit Q key on keyboard to exit)
    umount -f /dev/mnand0
    fdisk /net/mmx/dev/mnand0 delete -a
    fdisk /net/mmx/dev/mnand0 add -s1 -t177 -c0,685
    fdisk /net/mmx/dev/mnand0 add -s2 -t5 -c686,28005
    fdisk /net/mmx/dev/mnand0 add -s2 -e1 -t178 -n312
    fdisk /net/mmx/dev/mnand0 add -s2 -e2 -t178 -n1280
    fdisk /net/mmx/dev/mnand0 add -s2 -e3 -t178 -n2048
    fdisk /net/mmx/dev/mnand0 add -s2 -e4 -t178 -n128
    fdisk /net/mmx/dev/mnand0 add -s2 -e5 -t178 -n512
    fdisk /net/mmx/dev/mnand0 add -s2 -e6 -t178 -n512
    fdisk /net/mmx/dev/mnand0 add -s2 -e7 -t178 -n1024
    fdisk /net/mmx/dev/mnand0 add -s2 -e8 -t178 -n576
    fdisk /net/mmx/dev/mnand0 add -s2 -e9 -t178 -n15808
    fdisk /net/mmx/dev/mnand0 add -s2 -e10 -t178 -n5120
    fdisk /net/mmx/dev/mnand0 add -s3 -t179 -c28006,30315
    mount -e /net/mmx/dev/mnand0
    echo "y" | mkqnx6fs -T runtime -b 1024 -i 22912 /dev/mnand0t177
    echo "y" | mkqnx6fs -T media -b 32768 -i 1024 /dev/mnand0t178
    echo "y" | mkqnx6fs -T media -b 32768 -i 2048 /dev/mnand0t178.1
    echo "y" | mkqnx6fs -T media -b 32768 -i 256 /dev/mnand0t178.2
    echo "y" | mkqnx6fs -T media -b 32768 -i 2048 /dev/mnand0t178.3
    echo "y" | mkqnx6fs -T runtime -b 32768 -i 65536 /dev/mnand0t178.4
    echo "y" | mkqnx6fs -T media -b 4096 -i 32768 /dev/mnand0t178.5
    echo "y" | mkqnx6fs -T runtime -b 16384 -i 8192 /dev/mnand0t178.6
    echo "y" | mkqnx6fs -T media -b 1024 -i 32768 /dev/mnand0t178.7
    echo "y" | mkqnx6fs -T media -b 32768 -i 8192 /dev/mnand0t178.8
    echo "y" | mkqnx6fs -T media -b 32768 -i 16384 /dev/mnand0t178.9
    echo "y" | mkqnx6fs -T runtime -b 32768 -i 16384 /dev/mnand0t179
    umount -f /mnt/app

    cat /fs/sda0/MMX2/app/70/default/app.img > /dev/mnand0t177
    IMPORTANT (wait for this command to finish! May take several minutes!)
    cd HBpersistence/SWDL
    rm MainUnit-version2.txt
    rm MainUnit-version2.txt.SWDL.compatibility.txt
    rm MainUnit-version2.txt.SWDL.version.txt
    rm MainUnitIgnoreImages.txt
    /net/mmx/fs/sda0/RCC/tools/0/default/updatePersistence -type b -key 0xc002000d -value 1
    /net/mmx/fs/sda0/RCC/tools/0/default/updatePersistence -type b -key 1 -value 0
    • Reboot Unit (hold power button 30 seconds), Unit will reboot into MIB2.5 Firmware
    • Enter SWDL Once Again, Manual Download, Select All, and Reflash MIB2.5 Firmware Update
    Once Again, this will make a clean and complete Firmware Install.
    • DONE

  17. #17

    По умолчанию

    I would never flash MMX manually for G13 conversion.
    *) Edit Train to K3xxx and flash K3xxx(for better compatibility)
    *) Enable dev mode
    *) Flash G13 ifs-root and edit train to G13 - reboot
    *) enable user-swdl and check all modules and start flash
    *) after rcc_prescript eject sd card and format NAND for G13
    *) insert SD and continue

    Or better make script in to update files.

 

 

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Back to top