MMI 3G+ issu
Добро пожаловать на Turbo Quattro.
Страница 1 из 2 12 ПоследняяПоследняя
Показано с 1 по 20 из 22

Тема: MMI 3G+ issu

  1. #1
    Новичок
    Регистрация
    21.05.2018
    Сообщений
    12

    По умолчанию MMI 3G+ issu

    Hi all !!
    My MMI 3G+ screen dont start after an Emergency update..
    There is log :


    => boot 1c0000
    starting image @801c0000 ...

    Startup: PL_qnx_startup-sh7785_11292A, built 2011/07/19_08-03-38_UTC
    RAM : 128 MB @0x08000000
    RAM : 128 MB @0x40000000
    RAM : 256 MB @0x50000000
    FLASH: 128 MB @0x00000000
    FPGA IRQ: InterruptLevelMask Register

    System page at phys:0800a000 user:0800a000 kern:8800a000
    Starting next program at v88046ae0
    ------------------------------------------------------
    Welcome to QNX 6.3.2 (RL_qnx_os_632_PSP3_09423A) MMI3G Audi EMERGENCY SETUP 15325A
    starting pci driver
    *** init FPGA registers ***
    [pcidma] PL_qnx_pcidma_FMod08363A_09274A, built 2009/07/02_11-10-37_UTC
    starting dev-ipc for IOC
    initialize IPC Driver
    starting network driver
    starting atapi driver - setup device /dev/cam0
    InterruptAttachEvent failed
    InterruptAttachEvent failed
    Interrupt attach failed: (Polled mode operation) : Invalid argument
    Interrupt attach failed: (Polled mode operation) : Invalid argument
    Unable to access "/dev/cam0" (2)
    starting devc-pty
    starting flash driver
    starting SDCard driver
    Unable to access "/dev/io-net/en5" (2)
    starting with no network driver
    ================================================== =========
    Emergency IFS is started. Emergency app tries to restore
    the application.
    ================================================== =========
    49169 running /usr/bin/devg-NVTIRM
    DMA is Disabled
    dma disabled, interrupt thread priority = 100
    49171 running /sbin/io-media-nvidia
    49172 running /usr/sbin/io-display
    49173 running /usr/apps/MMI3GEmergencyApp
    ================================================== =========
    Emergency shell started, fix your system and restart again
    ================================================== =========
    discplayer_init: IN
    nvidia_render_manager_init: IN
    INvmRenderManager::GetNvmRenderManager (&pRenderManager);
    er = pRenderManager->Init(oConfig);
    # App FPGA valid 1
    Emergency FPGA valid 1
    Disabling IOC watchdog

    EmergencyApp-MMI3G: version 37.26.2098, date of build 07.08.2015
    pRenderManager->Open()
    nvidia_render_manager_init: OUT
    discplayer_init: OUT
    discplayer_init
    discplayer_init: IN
    nvidia_render_manager_init: IN
    nvidia_render_manager_init: OUT
    discplayer_init: OUT
    dvdtrackplayer_init
    discplayer_init: IN
    nvidia_render_manager_init: IN
    nvidia_render_manager_init: OUT
    discplayer_init: OUT
    dvdnavigator_init
    created navigator control point with 8249288
    mixer_init: IN
    mixer_init: OUT
    NvTRACELEVEL set to 3 (Level Info)
    nVAudio_init: IN
    nvidia_render_manager_init();
    nvidia_render_manager_init: IN
    nvidia_render_manager_init: OUT
    nVAudio_init: OUT
    installing audio decoders
    installing video decoders
    nVAudio_init: IN
    nvidia_render_manager_init();
    nvidia_render_manager_init: IN
    nvidia_render_manager_init: OUT
    nVAudio_init: OUT
    OnIpcGetCaptureUnitSourceCount
    Number of displays: 6
    Number of layers: 9

    ----------------------------------------------


    => scan
    ** @0x80040000: FPGA

    total size: 746480 [0x0b63f0]
    data: 746212 [0x0b62e4]

    .FDR = PL_MMI3G_PLUS_FPGA_9411_D1_09362A

    .FDU = Userinfos zu FPGA 9411_D1_4010_14lw

    ** @0x80100000: FPGA

    total size: 746480 [0x0b63f0]
    data: 746212 [0x0b62e4]

    .FDR = PL_MMI3G_PLUS_FPGA_9411_D1_09422A

    .FDU = Userinfos zu FPGA 9411_D1_4010_14lw

    ** @0x801c0000: IFS [vers.1, UCL, old EMERGENCY]

    total size: 4887860 [0x4a9534]
    - header: 256
    - startup: 53512
    - imagefs: 11776548

    RAM: 11830060 [0xb4832c]

    ** @0x80780000: IFS [vers.1, LZO, old APPLICATION]

    total size:42085196 [0x2822b4c]
    - header: 256
    - startup: 53512
    - imagefs: 96456444

    RAM: 96509956 [0x5c0a004]

    ** @0x87f00000: BIOS packet

    total size: 786432 [0x0c0000]

    BIOS pattern: FFFFFF7F.FFFFFFFF
    App. pattern: FFFFFF7F.FFFFFFFF

    Many thanks for your help !!!

  2. #2

    По умолчанию

    Wrong SW SD Card used at EMG Update. At MMI3GP (MU9411) the ifs root starts at 680000 not 780000 (thats MMI3G root adress)...
    Erase wrong header and restart EMG update with the correct version...

  3. #3
    Новичок
    Регистрация
    21.05.2018
    Сообщений
    12

    По умолчанию

    Thank you Tschako !!
    How can I erase header ?
    And a little question, when I am woth SW K0942, i update the map 6.26.1 after 2 min, MMi reboot constantly.
    For stop this, I remove map from HDD and MMi stop reboot.
    I do another update with the same map, but I removed the HDD map partition, and I have error 150 when update.
    Have you got an idea ?
    Последний раз редактировалось Emre69; 22.05.2018 в 23:19.

  4. #4

    По умолчанию

    Try the following steps:

    !! Attention !! SD Card with K0942 FW must be inserted!

    Enter IPL Mode:


    boot 1c0000

    echo dummy > /HBpersistence/DeveloperMode

    flashit -a 780000 -e 1000

    reboot the unit


    EMG update should start succesfull to rebuilt the flash images ...

    Cause the HDD problems:
    Delete Nav Partition by using the adaption value in APK 9 from 0 to 1 and reboot

    reinstall maps


    Good luck!
    Tschako

  5. #5
    Новичок
    Регистрация
    21.05.2018
    Сообщений
    12

    По умолчанию

    Thanks for reply !
    When i do command, I have this :

    echo dummy > /HBpersistence/DeveloperMode
    No such file or directory

    flashit -a 780000 -e 1000
    *** erasing...
    *** Verifying...
    #

    If I reboot, no more.

  6. #6
    Новичок
    Регистрация
    09.09.2007
    Адрес
    Москва
    Сообщений
    28

    По умолчанию

    Error 150 this is a corrupted HDD

  7. #7
    Новичок
    Регистрация
    21.05.2018
    Сообщений
    12

    По умолчанию

    Thanks dim250568, after reboot nothing appears

  8. #8
    Новичок
    Регистрация
    09.09.2007
    Адрес
    Москва
    Сообщений
    28

    По умолчанию

    Replacing the HDD will help

  9. #9
    Новичок
    Регистрация
    21.05.2018
    Сообщений
    12

    По умолчанию

    Ok now terminal don't work, can't access to MMI
    There is no =>

    I hear the speaker turning on..
    I hear some sound its working but no => in terminal..

    In terminal, there is only a green rectangle.

    I'm so disappointed
    Последний раз редактировалось Emre69; 23.05.2018 в 13:23.

  10. #10

    По умолчанию

    Whats about the IPL mode? Can you access into IPL via the short connector methode?

    The IPL shuold work all time. And from IPL the EMG IFS must be usable...

    Are you sure, you start EMG-IFS as my named commands in IPL and what happened after boot the emg-ifs from 1c0000???
    Последний раз редактировалось Tschako; 23.05.2018 в 13:47.

  11. #11

    По умолчанию

    http://turbo-quattro.com/showthread....ad-unit-repair

    Complete manual todo: http://yadi.sk/d/BkzEeID1GgbYf


    Read the whole stuff and you will be able to fix your problem...
    Последний раз редактировалось Tschako; 23.05.2018 в 13:52.

  12. #12
    Новичок
    Регистрация
    21.05.2018
    Сообщений
    12

    По умолчанию

    I do this for IPL

    https://image.noelshack.com/fichiers...523-125447.jpg

    When i do command, I have this :



    => boot 1c0000
    starting image @801c0000 ...

    Startup: PL_qnx_startup-sh7785_11292A, built 2011/07/19_08-03-38_UTC
    RAM : 128 MB @0x08000000
    RAM : 128 MB @0x40000000
    RAM : 256 MB @0x50000000
    FLASH: 128 MB @0x00000000
    FPGA IRQ: InterruptLevelMask Register

    System page at phys:0800a000 user:0800a000 kern:8800a000
    Starting next program at v88046ae0
    ------------------------------------------------------
    Welcome to QNX 6.3.2 (RL_qnx_os_632_PSP3_09423A) MMI3G Audi EMERGENCY SETUP 15325A
    starting pci driver
    *** init FPGA registers ***
    [pcidma] PL_qnx_pcidma_FMod08363A_09274A, built 2009/07/02_11-10-37_UTC
    starting dev-ipc for IOC
    initialize IPC Driver
    starting network driver
    starting atapi driver - setup device /dev/cam0
    InterruptAttachEvent failed
    InterruptAttachEvent failed
    Interrupt attach failed: (Polled mode operation) : Invalid argument
    Interrupt attach failed: (Polled mode operation) : Invalid argument
    Unable to access "/dev/cam0" (2)
    starting devc-pty
    starting flash driver
    starting SDCard driver
    Unable to access "/dev/io-net/en5" (2)
    starting with no network driver
    ================================================== =========
    Emergency IFS is started. Emergency app tries to restore
    the application.
    ================================================== =========
    49169 running /usr/bin/devg-NVTIRM
    DMA is Disabled
    dma disabled, interrupt thread priority = 100
    49171 running /sbin/io-media-nvidia
    49172 running /usr/sbin/io-display
    49173 running /usr/apps/MMI3GEmergencyApp
    ================================================== =========
    Emergency shell started, fix your system and restart again
    ================================================== =========
    discplayer_init: IN
    nvidia_render_manager_init: IN
    INvmRenderManager::GetNvmRenderManager (&pRenderManager);
    er = pRenderManager->Init(oConfig);
    # App FPGA valid 1
    Emergency FPGA valid 1
    Disabling IOC watchdog

    EmergencyApp-MMI3G: version 37.26.2098, date of build 07.08.2015
    pRenderManager->Open()
    nvidia_render_manager_init: OUT
    discplayer_init: OUT
    discplayer_init
    discplayer_init: IN
    nvidia_render_manager_init: IN
    nvidia_render_manager_init: OUT
    discplayer_init: OUT
    dvdtrackplayer_init
    discplayer_init: IN
    nvidia_render_manager_init: IN
    nvidia_render_manager_init: OUT
    discplayer_init: OUT
    dvdnavigator_init
    created navigator control point with 8249288
    mixer_init: IN
    mixer_init: OUT
    NvTRACELEVEL set to 3 (Level Info)
    nVAudio_init: IN
    nvidia_render_manager_init();
    nvidia_render_manager_init: IN
    nvidia_render_manager_init: OUT
    nVAudio_init: OUT
    installing audio decoders
    installing video decoders
    nVAudio_init: IN
    nvidia_render_manager_init();
    nvidia_render_manager_init: IN
    nvidia_render_manager_init: OUT
    nVAudio_init: OUT
    OnIpcGetCaptureUnitSourceCount
    Number of displays: 6
    Number of layers: 9

    #echo dummy > /HBpersistence/DeveloperMode
    No such file or directory

    flashit -a 780000 -e 1000
    *** erasing...
    *** Verifying...
    #

    If I reboot, no more, no green EMG IFS no, MMi screen dont come.

    Now i do IPL, (turn IPL , reboot, turn normal) and nothing juste a green rectanlge no =>
    Many thanks for your Help Tschako !!
    Последний раз редактировалось Emre69; 23.05.2018 в 14:03.

  13. #13

    По умолчанию

    The IPL located at adress "0" of the flash area is the first initial application the system starts up.

    With the a.m. flashit command you only erased the header of the wrong ifs image which starts much higher at 780000.

    The IPL must allways work as before. Without a working IPL you have no chance to start up the unit and do anything.

    Try to disconnect the HDD. Maybe there is a short circuit on the bus structure or something else.

    Check the connection of the terminal for sure!

    If all this things don´t fix your IPL, you only have the possibilty to reflash IPL via JTAG flash. But this is another story...

  14. #14
    Новичок
    Регистрация
    21.05.2018
    Сообщений
    12

    По умолчанию

    I forgot to to tell you, after reboot I see lot of command as "queuegetwriteptrext .."

    But MMi screen dont come, I reboot it and do this

    Flashit -a 40000 -e 1000

    I copy the wrong command I dont see.. I would paste your command for retry but I do wrong comand
    Последний раз редактировалось Emre69; 23.05.2018 в 14:47.

  15. #15

    По умолчанию

    OK, with this command, you have killed the emergency app, located from 1c0000 to 67ffff.

    But the IPL must run, if you startup with the IPL bridge at the beginning... if not, the JTAG is the only option you have.

  16. #16
    Новичок
    Регистрация
    21.05.2018
    Сообщений
    12

    По умолчанию

    Oh ! My bad

    I dont understand why IPL dont run.. I do notwithstanding I said..
    JTAG is complicated ?

    I'm going to see if connection are good, i testing now connection

  17. #17
    Новичок
    Регистрация
    21.05.2018
    Сообщений
    12

    По умолчанию

    Connection are good, can my computer dontd connect to IPL ? At the beginning I put switch on IPL, I press Reboot, and turn IPL switch to normal

    If I do flashit -a 4000 -e 1000 ? I dont do that but if..

    If I need JTAG, how much cost this ? And can I do that ? Because, IPL dontd work now, I hear the HDD working, I hear sound, but nothing..
    Последний раз редактировалось Emre69; 23.05.2018 в 21:55.

  18. #18
    Новичок
    Регистрация
    21.05.2018
    Сообщений
    12

    По умолчанию

    Nobody ?

  19. #19
    Новичок
    Регистрация
    08.10.2014
    Адрес
    Serbia,Belgrade
    Сообщений
    24

    По умолчанию

    I can try to help you via teamviewer.Post label picture.

  20. #20
    Новичок
    Регистрация
    21.05.2018
    Сообщений
    12

    По умолчанию

    Oh thank you !! When ?
    But can we do ? IPL dont work now..
    Последний раз редактировалось Emre69; 26.05.2018 в 06:00.

 

 

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Back to top