Discover Pro
Добро пожаловать на Turbo Quattro.
Страница 1 из 3 123 ПоследняяПоследняя
Показано с 1 по 20 из 42

Тема: Discover Pro

  1. #1
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию Discover Pro

    Может есть у кого обновления для данного устройства, не могу найти.

    Подключился в терминале, не могу найти скорость обмена, может есть у кого информация!
    Последний раз редактировалось Crash-100; 22.01.2015 в 15:12.

  2. #2

    По умолчанию

    Если кому еще нужно вот ссылка https://cloud.mail.ru/public/0ad32cb...erProFW200.zip

  3. #3
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    Спасибо, очень помогло!!!

  4. #4
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    Log с дохлой башки. ))
    Вложения Вложения
    • Тип файла: txt mib_jp.txt (649.5 Кб, Просмотров: 222)

  5. #5
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    кто грызет этот орех, пишите в лс

  6. #6
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    Стоит пароль на выполнения команд


    nVidia Quickboot 12.0127U (Build Jun 25 2012)
    modified by e.Solutions GmbH
    Press <E> to run Emergency Flash Utility.
    VFPv3: fpsid=41033091
    coproc_attach(10): replacing fe066d20 with fe07cfcc
    coproc_attach(11): replacing fe066d20 with fe07cfcc
    юIFS Loader (Build Jul 18 2012)
    Copyright (c) 2011 e.solutions GmbH. All rights reserved.


    handling first frame
    [ 0:00.568 OOC INFO ]: IOC -> new MMI state: 0xe, last on flag: 1
    [ 0:00.569 OOC INFO ]: IOC -> clamp S/15: 0/0
    [ 0:00.569 OOC INFO ]: IOC -> startup variant: 0x0
    start mode = 1
    IRC: /net/rcc/dev/irc couldn't be opened!
    IRC: /net/rcc/dev/irc couldn't be opened!
    IRC: /net/rcc/dev/irc couldn't be opened!
    IRC: /net/rcc/dev/irc couldn't be opened!
    IRC: /net/rcc/dev/irc couldn't be opened!
    IRC: /net/rcc/dev/irc couldn't be opened!
    rp0 ok
    rp1 ok
    translations done
    checking rootportsPCIe Rootport 0 link up timed out
    .PCIe Rootport 0 link up timed out
    .PCIe Rootport 0 link up took 90ms


    PCI endpoint (0xb800104c) is on bus = 1, device = 0
    assigning resources
    assigning resources
    PCIe bridge/Root port
    Vendor/Device = 0xbf010de bus = 0 sec bus 1 sub bus 1
    class 0x00060000 revision a0
    bar(2) 32 Bit
    start = 83000010
    end = 83000010
    size = 0
    flags = I/O
    bar(3) 32 Bit
    start = 90000000
    end = 90010000
    size = 0
    flags = Memory
    bar(4) 32 Bit
    start = a0000000
    end = a0001000
    size = 0
    flags = Prefetch
    PCIe device
    Vendor/Device = 0xb800104c bus = 1 sec bus 0 sub bus 0
    class 0x00078000 revision 00
    bar(0) 32 Bit
    start = a0000000
    end = a0000fff
    size = 1000
    flags = Prefetch
    bar(1) 32 Bit
    start = 90000000
    end = 90003fff
    size = 4000
    flags = Memory
    bar(2) 32 Bit
    start = 90004000
    end = 90007fff
    size = 4000
    flags = Memory
    bar(3) 32 Bit
    start = 90008000
    end = 9000bfff
    size = 4000
    flags = Memory
    bar(4) 32 Bit
    start = 9000c000
    end = 9000ffff
    size = 4000
    flags = Memory
    Image mounted successfully.
    Image size: 52406220 bytes
    Transfer time: 1.038999 s
    Transfer speed: 48.102518 MB/s
    login: Path=0 - Generic SDHCI
    target=0 lun=0 Direct-Access(0) - MMC:144 HYNIX Rev: 7.3
    Mapped 6000D000h to 28000000
    NAD is 1
    PPIS Startup Sequence (takes ~2s)
    Path=0 - Generic SDHCI
    Path=0 - Generic SDHCI
    Setting deva-nvaudio priority: 21
    Setting deva-nvaudio dma interrupt priroity: 26
    Path=0 -
    target=0 lun=0 Direct-Access(0) - ram Rev:
    IRC: /net/rcc/dev/irc couldn't be opened!
    MMX BENCH_Startup IMG_VER #SOP1_VW_EU_086PROD 790
    Driver settings: Thread priority = 15 TVMR get frame timeout (msecs) = 120
    Display width = 800 Display height = 480
    Verbosity level = 0
    CHALLENGE: Running on port 22111.
    RAM_DISK too small for SWDL, starting HMI normally...
    IRC: /net/rcc/dev/irc couldn't be opened!
    IRC: /net/rcc/dev/irc couldn't be opened!
    SLF: 00:00:00.044 43690 0 2 devg-nvrm: Starting thread pool loop

    SLF: 00:00:00.045 43690 0 2 Chip Id: 0x20 (Handheld SOC) Major: 0x1 Minor: 0x4 SKU: 0x2c

    SLF: 00:00:00.072 43690 0 2 NVRM Initialized shmoo database

    SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: PLLX0: 900000 Khz

    SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: PLLM0: 666000 Khz

    SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: PLLC0: 600000 Khz

    SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: PLLP0: 216000 Khz

    SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: PLLA0: 11289 Khz

    SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: CPU: 900000 Khz

    ls /dev

    login:root

    Password:

    Login incorrect

    SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: AVP: 240000 Khz

    SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: System Bus: 240000 Khz

    SLF: 00:00:00.080 43690 0 2 NVRM CLOCKS: Memory Controller: 333000

  7. #7
    Пользователь
    Регистрация
    13.06.2014
    Сообщений
    47

    По умолчанию

    From software 0100 till 0200 is possible start any script form engineering menu: mmx/navigation/ebnav/ebonly/tester-scripts/SW Update - SKODA Style. On SD card this script has to be in folder: swdl\scripts\ name of file: sw_update. Engineering menu could by setup by VCP -> 5F -> switch to enginnering mode -> adaptation -> development mode -> enable -> Save and Restart unit. This is small example with flash files from test unit(update has not finished correctly with these files - could you see in log: swdl.sk.log. http://ulozto.net/x75ZhyYX/mib-unofficiall-update-zip
    Последний раз редактировалось hrdinaveliky; 26.02.2015 в 17:06.

  8. #8
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    your device not work ?
    you can't flash IOC and Inic without switching in bolomode
    May be you have login and password to acsses

  9. #9
    Пользователь
    Регистрация
    13.06.2014
    Сообщений
    47

    По умолчанию

    I have now unit on CAN but display is black...i see like very interested:
    Press <E> to run Emergency Flash Utility.

  10. #10
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    my vesrion is high and in emagency login too

  11. #11
    Пользователь
    Регистрация
    13.06.2014
    Сообщений
    47

    По умолчанию

    How connect to unit??? How port use for connection?? 851??
    Последний раз редактировалось hrdinaveliky; 27.02.2015 в 00:09.

  12. #12
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    Есть Discovery Pro, вдруг стала сама перезагружаться, хочу сделать через Emergency Flash Utility обновления, но он просит файлы в архиве, может кто располагает информацией пишите в л.с

  13. #13

    По умолчанию

    Hi guys, until the SW release P1048 EU, the MIB 1 works with SD scripts, if they are correct coded...

    Newer SW version need a signature with hash etc.

  14. #14
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    Цитата Сообщение от Tschako Посмотреть сообщение
    Hi guys, until the SW release P1048 EU, the MIB 1 works with SD scripts, if they are correct coded...

    Newer SW version need a signature with hash etc.
    i can too but in this HW i can make script because HW all time reset i need make Emagency update maybe you know how ?

  15. #15

    По умолчанию

    maybe, there are seperate emg updates available for the MMX and the RCC clusters. I have seen a function of the mergency update in the green eng menu...
    I will try to send you the call behind the engdefs entry...

  16. #16
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    see this activate_efu.sh
    .................................
    echo -n "Invalidating boot partition... "
    dd if=/dev/zero of=/dev/fs0 seek=59 bs=131072 count=1 > /dev/null 2>&1
    echo "done."
    echo "Emergency Flash Utility will start on next boot."
    echo
    echo "If the emergency update doesn't start please check that"
    echo "the SD card also contains the 'update***.dat'-files."
    echo "These files are provided with every build in the file"
    echo "UPD_NORMAL_<VERSION_NAME>.zip

  17. #17

    По умолчанию

    There is a batch in a MIB1 ENG unit calls "activate_efu.sh" efu means "Emergency Flash Update"
    content of this batch as follows:

    #/bin/sh
    echo -n "Invalidating boot partition... "
    dd if=/dev/zero of=/dev/fs0 seek=59 bs=131072 count=1 > /dev/null 2>&1
    echo "done."
    echo "Emergency Flash Utility will start on next boot."
    echo
    echo "If the emergency update doesn't start please check that"
    echo "the SD card also contains the 'update***.dat'-files."
    echo "These files are provided with every build in the file"
    echo "UPD_NORMAL_<VERSION_NAME>.zip"


    But be aware of the result. This script is from an engineering sample, I dont know whats happend with a production unit!!!!

  18. #18

    По умолчанию

    Hey, your are faster with tipping in...

    Thats what I mean before

  19. #19
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    where i can find UPD_NORMAL_<VERSION_NAME>.zip ?????

  20. #20

    По умолчанию

    I have to search for it in the FW files... Ill come back with findings...

 

 

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Back to top