Turbo Quattro

That is great. But still no updates for MHI2_ER_AU57x

Has anyone tested / installed MHI2_ER_AU37x_P5089?

Uuuhm.. So are all of these newer versions ?


4M0906961BK = MHI2USP4219 = MHI2_US_AU37x_P4219
4M0906961BL = MHI2ERP4203 = MHI2_ER_AU37x_P4203
4M0906961BQ = MHI2ER5089 = MHI2_ER_AU37x_P5089
4M0906961BR = MHI2ER5098TT
4M0906961BS = MHI2ER5099R8

Anyone know which zip is for the latest K3xxx firmware for a 4G ?

4M0906961AG
<pack:Remarks />
<pack:Password>P1ZIO6Jankqc/tO2ontK4GkWkbXwvj9GkN5JQxy7ejo=</pack:Password>


> password is 'Audi_HighScale_NAR'

Success ! Took me 4 purchases (and 3 paypal refunds) to get the right display, but now everything works.

Found the problem.
CAN analysis during startup showed that the display was not replying.
I've removed the display cover to take a look and discovered that the seller sold me the wrong display ( 4G1919605, 3GP display) instead of the advertised mib model (4G5919607).

P_20170423_142741.jpg
Edit ...

@congo: You were right. :)
I've reversed the wire order and now the lights come on and the display flips open!

The screen itself however still doesn't turn on.. I've tried switching display can high/low, but that doesn't help.

I then suspected that the hsd fakra cable was wired differently from ...

Ah, so the left one is correct, and the right one is wrong ?
I've wired it like in the right picture.

I was just about to connect a scope and an analyzer to the display can bus wires

I've connected a serial terminal, but i'm not sure what is wrong with my unit...
It looks like it is shutting down right after completing startup ?

complete log:
https://mega.nz/#!hQEn2a5L!CGeJPRtA76kx6GmLX6HXVlminEix9DOgns0D7OGMzqw

#2 HB: System is still alive.
00:00:18 HB: T=031C, CPU=66 ...

I have just finished my wire loom to benchtest a spare mib2 unit. Thank you all for you help !

However, after connecting screen, keypad and test unit and powering them up, not a lot happens :)

is a gateway required to allow the screen tilt mechanism to open ?

P_20170422_080200.jpg

P_20170422 ...

Thank you for your reply. So if i understand correctly the A3 display will work with an A6 MIB2 ?

Does someone know if the 8" MMI 3GP display (4G0919605) is compatible with the 8" MIB2 display (4G5919607) ?

(Can i buy the old display to bench test a MIB unit ?)

Does anyone have photos of the MIB board(s) ?

Does someone have the connection diagrams for an Audi MIB2 main unit (quadlock) and control panel (2x10pin connector)?
I would like to make cables to do benchtesting on a spare A6 4G MIB2 unit..

I've just visited the dealer again, there is still no sd card available for version >= P3236.

Like Nikolajse said, 4M0906961Q is currently the latest version in ETKA.

But really, i don't think that any of this is necessary. There are drivers for using the WLAN in client mode present in the MIB2 firmware, and the connection manager has code to support and configure it.
You can even see this in the green engineering menu, there is an extra adapter interface called ...

I know that the original model is connected through a usb port, and i'm not talking about a usb 'stick', but there are developer modules from cinterion that could be used (sold directly by Gemalto):
https://webstore.gemalto.com/INTERSHOP/web/WFS/GEMALTO-B2CCORP-Site/en_US/-/EUR/ViewProduct-Start ...

@edgaro
in theory you could even use the usb development modules, see here in "usblauncher.lua":

-- Huawei ME909Tu/Au-120
device(0x12d1, 0x1573) {
configuration(2) {
interface(0) {
driver"/etc/scripts/huawei.sh attached normal_mode vid=$(vendor_id),did=$(product_id),busno=$(busno),devno=$(devno ...

@Congo

Can you give this a try ?
/bin/touch /tmp/ppp_connected