Turbo Quattro

on Unix/Linux/OSX/QNX

cat file2 >>file1

after that file1 is merged content of 1 and 2

regards

:-)
the word public in the key's name says it all
if you find the same files with "private" instead of public
please post it :-)

which firmware ?
in recent MIB Firmware there is NO ifs-root. IFS in the MMX directory !

Hi,

what version of firmware are you using ?
What is the path to the root-ifs.img (int the firmware) you dumped on your previous post ?

MHIG_EU_AU_P1531/MMX1/mifs-stage1/40/default/mifs-stage1.img
MHIG_EU_AU_P1531/MMX1/mifs-stage2/40/default/mifs-stage2.img

these can not be dumped using dumpeifs ...

checksum recalculation is no problem at All
Just Spit it into 512 kbyte blocks

openssl dgst -sha1 block1
openssl dgst -sha1 block2
...
does all you need

but the problem is probably the signature block at the and of the metafile
seems to me like a rsa signature
probably it is the metafileChecksum ...

btw
does anybody have an idea what format the ifs-images
in the MIB Firmware updates are ?!
They look encrypted to me

FW MIB
uses Sha1 Algo But at the end of the file there is A (RSA) Signature (128 bytes) That is Probably the dealbreaker :-( regards

Hello,
sorry i do not speak russian so i write in english because i hope this is more understandable
as a google translation to russian :-)

It s no secret anymore that CP in 5F Units is in EEprom between
adressess 0x640 and 0x77F,
so i hope it is ok to discuss this here.

Most people copy the ...

EEPROM Address 0x908
and following

did not know that either - thanks for sharing the information

tell us more !!! :-)

it is probably in STG 1
the rest reads it over can bus

Hi

i do not think the vin is in the eeprom
at least not in the eeprom of STG 5F

The vin is read from the car bus

but you are right - it has to be stored somewhere

maybe in the gateway EEPROM

does anybody know more ?

Well to clarify - we are talking about 3GP units ??

You changed 3GP Low (no HDD) to 3GP High (HDD) - right ?

Did you swap the control units in the middle of the car too ?
3GP Low has no Joystick button ?!?

regards

Problem solved, not 100% sure if everything is ok
but it sound almost than before.
thanks to all who tried to help.

regards

Hi, no, no flat cable module has the A connector on its left bottom
it is directely plugged onto the connector on the main pcb

sorry i do not have more pictures
the unit is already back in the car.

i do not think it is any standard module
the antenna connector is on the backside of the module ...

Hi, this is what the GSM / UMTS Module Looks like.

if you open the unit - front side pointing to you -
it is located on the right side on the backside of the unit.
There is a small connector soldered to the board
where the module is plugged in.

I confirm that Vag can pro can change the car dimensions for a 5F unit.

What do you mean by that ?!?
i do not quite understand

regards

@ladadens[CENTER] : You mean the EEPROM Parameters in the MMI 5F right ?!
That is what i suspect too.
Anybody any information on how the correct coding is ?[/CENTER]

Well, 56 is the radio unit RU
i did not change anything on that unit
if i swap main units MU (3gp <-> 3g)
sound changes from good to bad and vice versa

Du you really think there has to be done something on device 56 ?
B&O has its own amplifyer - it is device 47.

56 has integrated amps for ...