Turbo Quattro

Hello,
i have some unit on my warehouse with a software letter to change for solve a lot of problems.
example: for a car i need a unit 8W0 035 036 A and i have buyed a unit with "8W0 035 036 A" label... but.... if i make a diagnosis the letter are "8W0 035 036 C"
are possible to change this letter ...

Hello,
are possible to change a Sw part nr. letter on MIB 2 with VAGPro like MMI 3G?

But for unlock 2015 maps on Audi A1 8X with MMI 3G high what activator i have to use? 767 or 770?

i have on my hard drive a backup make with a script, of an unit.
i have the 3 files
fs0.dump
fs1.dump
fs4.dump

are possible to use this files for recovery this unit?
there is a special comand for flash this file directly on the unit?

i have disponible a Discover Pro with the Map modification.
THis modification permit to use the navigation Map and don't need to be removed the component protection.
THere is a possibility to download all the software of this unit for upload on another unit to make unlocked a second ipotetical unit?

ok for a couple of reboot but today i think the unit are rebooted aproximately 30 times
but the error "fs0p3 error -1" are normal?


---
amd_poll: 186 DQ7 polling Timeout
(devf t5::f3s_aCFI_v2write:250) over poll waiting for write completion at 3f580484, size 12
(devf t5::f3s_ext_write:195) fs0p3 ...

flashit -a 6200000 -e 1000

ok i have used this line but when i start the unit work for about 10-20 sec and will freeze and on the terminal i see this:

--> SAM is initialized
..initializing addon "SSSMonitor" ...ok
..initializing channel "HostAgent" ...ok
..initializing channel "MonitorService ...

You wish to delete all the content in the /mnt/efs-persist ?

when i have recovered the unit i have see the error regards the efs-persist corrupted. and the unit remain locked when i start.
through com connection i read this:

amd_poll: 186 DQ7 polling Timeout
(devf t2::f3s_aCFI_v2write:250) over poll waiting for write completion at 3fa81940, size 12
(devf t2 ...

i have another question.
i have unit (mmi 3gp 8R1 035 666) that have the EFS-Persist damaged, i have another unit for extract the EFS-Persist but i don't find the mothod to extract that data...
There is a script for backup this partition on a BIN for manually flashit through terminal?

Problem solved... Hard disk are not working... i have changed the hard disk and all work perfectly

i have tried to recovery a unit from failed update.
the unit at this moment start up correctly.
but if i try to install the maps (2015) all the update go failed.

during the boot i have see this ...

i have tried to recovery a unit from failed update.
the unit at this moment start up correctly.
but if i try to install the maps (2015) all the update go failed.

during the boot i have see this strange error:


[WRN]@35874 (122905.9): devctl '0X4090055C' <DCMD_HB_HDDMGR_GETDRIVEIDENTITY> call ...

i have tried with an auto start script on MMI 3Gp a4 8K but the script don't start.
i have reset the software and forced the reinstall of the ARU update but the problem are the same.
it is possible that autostart is disabled?

Прекрасно! маленький вопрос ... Я новичок в этом;-)
У меня есть 2 маленьких вопросы
Вопрос 1: у вас ссылка о том, как читать, а затем разрезать файл дампа? или у тебя есть документы или сайт для понимания и найти эту информацию?

Вопрос 2: есть ли у вас образец файла, чтобы понять, как ...

совершенным, но для FlashIt необходимы некоторое оборудование? не так ли?
это очень интересно.

привет!
У меня есть вопрос, я сделать резервную копию моего подразделения, но .. для восстановления резервной копии?
есть скрипт или процедура?

Извините за мой плохой русский, но ... я использую мой друг "Гугле переводчик " :-)