Turbo Quattro

I would never flash MMX manually for G13 conversion.
*) Edit Train to K3xxx and flash K3xxx(for better compatibility)
*) Enable dev mode
*) Flash G13 ifs-root and edit train to G13 - reboot
*) enable user-swdl and check all modules and start flash
*) after rcc_prescript eject sd card and format ...

Hello

I was given this RNS850/MMI3GP dead. Tried with HN+_EU_VW_K0824, but nothing.
Emg does 6/8, goes to reboot and screen still dark.

HDD seems ok.

Here is log:

This is finished now.
Tried Format Partition again and now worked.

Checked via Dlink, HDD partition was full, that's why error code.
All is converted now, MMI, Radio RSE .... All.

This is a old post but I have the same question for the MIB/MIB2 units: How to flash/replace app.img?

Open app.img file and paste partiontable header from 0x0 to 0x7fff. Then put it to mnand0.

dd if=..../path_to_sd/app(with header).img of=/dev/mnand0


or

dd if=..../path_to_sd/app.img skip 64 ...

Hello

I'm doing JAP TO EU conversion and can't load maps to unit.

Firmware is done and Radio is done.
When updating maps I get "Error Code 140"

I've tried "Delete nav DB" "Delete partition" etc ... HDD seems ok per SMART.
No idea what to do more.

123830300_3420213684701021 ...

flashit -p /net/mmx/dev/fs0 -v -d -a 0x160000 -f ../eifs.img

DON'T FORGET TO CHANGE HEADER TO : " ANDROID! "

mibmaster писал(а):P0879 has disabled telnet. How did you copy the modified delphibin.ifs into the unit?

I didn't do on P0879, but P0231D.

I had similar fault with different train, but can't remember which.

Today after many months I tried again.
I unpacked delphibin.ifs and did needed modifications to SWaP region and repacked.
Everything works OK for 5Min(Incl. AppConnect, Maps etc....), then reboots into Blue Emergency Mode and starts recovering. I don't see what I've done wrong.

With restart I'm ...

Because patched files have somesort of CRC in FF FF area. Last time I tried, this resulted in Blue Screen which was restored with original SW.

Hello...
Anyone have solution for this?
Does anyone sell solution for Delphi, not just patch files?


Thank You!!!

I have, please PM!

What cluster are we talking about?

Not possible. Only VW has private key for signature calc.

Bas писал(а):No i dont have any idea! Same here, USB works with byte 19 but no Carplay

USB module with Apple support?

Not all support apple.

hondaa писал(а):its easy ,,AudioMenager"

Yes, but if You patch only part and don't, i think checksum???, it, You will have BSOD.

How to checksum?

Password for energency not harman_f?

I have ALL updates. What You need?

Fix train and MNAND partition.

You read it as text. You use notepad++ or similar program to remove 0x00 0x10 0x20 and [space]. Then you paste text as hex in some hexeditor....like hex workshop.

Replaced shadow and reflashed to stock.

All good now!