MMI 3G problem - no boot and no image
hi guys, I have a mmi 3g unit that refuses to boot and there's no image even when trying to boot emergency. I don't know the history of it but I want to get it working. IPL is ok but unit don't see hdd or sd card either when trying normal or emergency boot. I tried to write flash (desoldered and soldered back) from another working unit and it's the same. I've seen some guys with same problem in a few posts here but none of them replied if they managed to find the problem. I attach log here. any help is appreciated.
- hdd is ok checked in pc
- unit takes cd, spin it and ejects it using eject button
- console works (I can reset unit from console)
IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_08253A, built 2008/06/18_15-16-25_UTC]
CPU: SH7785 (>= 5th cut, clk mode 20. 4xDDR), 792MHz
RAM: 512 MB (probed, DBCONF=e30002)
FLASH: Spansion S29GL512N (32bit): 512 sectors x 256K
FPGA: PL_MMI3G_PLUS_FPGA_9411_D1_09362A
(0ms)
Entering CLI, type '?' or 'help' for help
=> boot 1c0000
starting image @801c0000 ...
Startup: PL_qnx_startup-sh7785_08362A, built 2008/09/02_07-53-12_UTC
RAM : 128 MB @0x08000000
RAM : 128 MB @0x40000000
RAM : 256 MB @0x50000000
FLASH: 128 MB @0x00000000
System page at phys:0800a000 user:0800a000 kern:8800a000
Starting next program at v88046a20
------------------------------------------------------
Welcome to QNX 6.3.2 (RL_qnx_os_632_PSP3_08493A) MMI3G Audi EMERGENCY SETUP 09283A
starting pci driver
*** init FPGA registers ***
Unable to access "/dev/sysregs" (2)
starting dev-ipc for IOC
initialize IPC Driver
Can't start driver '/dev/ipc/onoff'starting network driver
starting atapi driver - setup device /dev/cam0
xpt_configure: No eide interfaces found
Unable to access "/dev/cam0" (2)
starting devc-pty
starting flash driver
starting SDCard driver
Unable to access "/dev/io-net/en5" (2)
starting with no network driver
================================================== =========
Emergency IFS is started. Emergency app tries to restore
the application.
================================================== =========
69644 running /usr/bin/devg-NVTIRM
DMA is Disabled
dma disabled, interrupt thread priority = 100
69646 running /sbin/io-media-nvidia
69647 running /usr/sbin/io-display
69648 running /usr/apps/MMI3GEmergencyApp
================================================== =========
Emergency shell started, fix your system and restart again
================================================== =========
discplayer_init: IN
nvidia_render_manager_init: IN
INvmRenderManager::GetNvmRenderManager (&pRenderManager);
er = pRenderManager->Init(oConfig);
# App FPGA valid 1
Emergency FPGA valid 1
Disabling IOC watchdog
EmergencyApp-MMI3G: version 30.15.1812, date of build 08.07.2009
pRenderManager->Open()
nvidia_render_manager_init: OUT
discplayer_init: OUT
discplayer_init
discplayer_init: IN
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
discplayer_init: OUT
dvdtrackplayer_init
discplayer_init: IN
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
discplayer_init: OUT
dvdnavigator_init
created navigator control point with 8249288
mixer_init: IN
mixer_init: OUT
NvTRACELEVEL set to 3 (Level Info)
nVAudio_init: IN
nvidia_render_manager_init();
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
nVAudio_init: OUT
installing audio decoders
installing video decoders
nVAudio_init: IN
nvidia_render_manager_init();
nvidia_render_manager_init: IN
nvidia_render_manager_init: OUT
nVAudio_init: OUT
OnIpcGetCaptureUnitSourceCount
Number of displays: 6
Number of layers: 9
