| Cylinder Head; |
|
|
|
| Full Stage IV Race Porting - Porting of intake and exhaust ports and combustion chamber |
$1 600,00 |
| Includes flow balancing and provide flow information. *All labor, new guides, custom seats, 5 angle hi flow seat treatment.* |
|
| This requires about 24 hours labor |
|
|
|
| Provide 32.5mm Intake valves - Stainless Steel with Black Nitride finish |
$200,00 |
| Provide 28.5 mm Inconnel Exhaust valves |
$255,00 |
| Provide Hi Rate Chrome Silicon valve springs with Titanium retainers |
$440,00 |
|
|
| Sub Total, No Sales Tax, No VAT |
$2 495,00 |
|
|
| Short Block: Labor and machine work. |
|
| Hot tank, clean oil galleys, tap head and main bolt holes to clean up for new studs |
$100,00 |
| Bore block and precision hone with torque plate |
$250,00 |
| Dissassemble, clean and port oil pump for increased flow (Blue print oil pump) and reassemble |
$100,00 |
| Check and verify all internal clearances |
N/C |
| Install new main and head studs |
N/C |
| Check crank for straightness and any run out on crank nose, assemble pistons and rods, set ring end gaps with precision diamond grinder, |
|
| micro polish crankshaft main and rod journals, re- check all final clearances and then precision assemble engine to FRP specs |
|
| 8 hours labor @ 90.00 per hour |
$720,00 |
| *If block needs to be line honed add |
$150,00 |
|
|
| Parts |
|
|
|
| Provide New Cat Camshafts and light weight hydraulic lifters good to 8300 rpm with valve timing for 800 HP |
$1 485,00 |
| Provide FRP Wiseco Racing Pistons with gas Nitride Stainless steel rings, pins and locks |
$869,00 |
| Provide high grade racing connecting rods |
$550,00 |
| Provide ARP Main and Head Studs |
$325,00 |
| Provide ACL Race Series Coated Rod Bearings |
$150,00 |
| Provide New Factory Main Bearings |
$120,00 |
| Provide MLS Head gasket and all other engine gaskets and seals |
$200,00 |
| 034 Motorsport Stage 2C Engine management |
$1 750,00 |
| Complete plug and play harness with all terminal ends for sensors, ignition and fuel injection |
$750,00 |
| 034 High Output Coils |
$675,00 |
| Dual Bosch 044 fuel pumps |
$500,00 |
| Bosch 1000cc EV14 fuel Injectors |
$480,00 |
| Borg Warner 8374 Turbo (part number 179357 with a T4 twin scroll turbine .92 A/R with integral waste gate part number 12741008001) |
$2 190,00 |
| Wagner Tuning intake manifold |
$950,00 |
| or |
|
| FRP Turbo Manifold |
$1 225,00 |
| adjustable cam timing gear |
$195,00 |
| timing belt |
$25,00 |
| water pump |
$65,00 |
| Billet fuel rail for injectors - high flow |
$115,00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Total for reliable 750 to 800 HP Engine with FRP Warranty No sales tax or VAT Tax |
$16 434,00 |
