Turbo Quattro

[quote="pollopopo"]strange what you tell me, I know that vcp allows (if you know) to remove the cp.[/quote]

vcp allows on MMI 3G systems, but not on MIB

[quote="pollopopo"]do you know who could have it? or possibly which one should I look for?[/quote]

Sent me PM

[quote="simaservis1108"]You cant edit MIB2 eeprom via VCP.
You can read it with some cheap programmer.It is near V850 MCU.
AT64A.[/quote]


strange what you tell me, I know that vcp allows (if you know) to remove the cp.

You cant edit MIB2 eeprom via VCP.
You can read it with some cheap programmer.It is near V850 MCU.
AT64A.

[quote="simaservis1108"]why would you need the password for the old firmware?

I only store passwords for newest firmwares.[/quote]

I could try vcp for the eeprom modification, but I didn't understand how to use its hexadecimal reader ..... it always gives me login problems. furthermore, I would have liked to have had the possibility to make a backup of the 5f unit first and without password it is impossible


I don't have firmware to install right now from which to recover the password except 1187 ....

why would you need the password for the old firmware?

I only store passwords for newest firmwares.

[quote="simaservis1108"]Modify eeprom and change train...[/quote]


I am partially aware of this change, although I should better inform myself what to touch in hexadecimal (swdl should still ignore the sw train if you want, but I don't want to risk)


I have 2 problems


the first is that I don't know the root access password (telnet)


the second is that mib2 toolbox does not install,
I have problems with metainfo


.... for the first problem I'm working on it, if the password of the s0259 is the same as that of the 'old' k0259 I asked a site to decrypt the hash (always if someone doesn't pass it to me: P) ... if it has been changed then I don't know how to find the hash without using mib2 toolbox or updating to a firmware with a known password

for the second problem I have to hope that someone will solve it ... unfortunately the metainfo are variable and it is difficult to build a product for everyone when the firmware is really a lot

do you have any different solution in mind?


many thanks for the hand

Modify eeprom and change train...

[quote="Bas"]No, you need intermediate firmware[/quote]


do you know who could have it? or possibly which one should I look for?

No, you need intermediate firmware

hi guys i have a question


is it possible to switch from version MU0199 (S0259) to MU1187 (K3332) via SWDL (green menu) without incurring any particular problems??

through the normal update the SW train blocks me the update (medium, train is blocked)

I saw on obd11 that whoever has the same hardware as me has arrived at mu1187

my hardware after the recall in VW which updated I don't know what ....

[color=#333333]hardware revision 3G0035043K (EX [/color][color=#333333]3G0035043A[/color][color=#333333])[/color]
[color=#333333]MU 0199[/color]
[color=#333333]SW train MHI2_ER_VWG11_S0259 (EX K0259)

[/color]thanks so much for the hand, with cell phones I'm good, with navigators it's all much more confusing :(