PDA

Просмотр полной версии : Audi MIB2 Bose no sound - sorry for the english



rendezo
30.09.2019, 15:00
I made an update in MIb2 system and forgot to not update the bose system.

And now no sound completely. Not quite. No sound.
I check with odis online, and unable to do the proper programming.
I said not good software.

Before update : MHI2_ER_AU57x_P3236 MU 670
After update : MHI2_ER_AU57x_P3634 MU 910

The bose is: 4G5035223D

Tired with VCP parameterization, but no zdc for this. The VCP guys said they try to get me..

I try to downgrade back, but I couldn't find the software.

So I asking for help if it's possible.

This file: MHI2_ER_AU57x_P3236 MU 670
Audi A6 2017


Or anything that helps.

Not asking for free, any remote help could be useful.

Thank You very much!

car_driver
30.09.2019, 17:59
I wonder why it doesn't work! Maybe because it's a P Version (P3634). Only for production. Software MHI2_ER_AU57x_P3236 is not available!
You can make an update to K3663 (4M0906961DA). http://pixelbytelab.com/mirrorserver/dav/Service42-MMI/Trade-Retail/Brand-A
RAR Password is: L93SdFrN7


This is a officical update for your system. Use SWM Code in ODIS MHI2ER3663 and make an update with ODIS "Software Versions Management", not Red Menu.
I think it can works with bose Parameter only with SVM Code. Officical Software Updates works most with SVM Codes!

rendezo
30.09.2019, 19:28
Hello,

Thank YOu.

I put the sd card to the 5F. Odis dont found it.
8gb Fat32.

Something special?

car_driver
30.09.2019, 19:45
Update procedure with SVM Code in ODIS?
SVM Code must be valied for this procedure. They check online in ODIS.
I think must be work! It is a right update for your system.
I hope the old P3634 will not blocked by SVM.

car_driver
30.09.2019, 19:54
Or you use following function in ODIS Online: Control module replace.
They will setting new parameter in 5F. But i don‘t know if it works with P3634.

car_driver
30.09.2019, 19:58
And if don‘t work, you must start update in red menu and hope it works!
After Update, the mib system will make an online connection with odis.

car_driver
30.09.2019, 20:02
P Software is for factory production.
K Software is a service update by dealer with ODIS Online.

rendezo
30.09.2019, 21:05
P Software is for factory production.
K Software is a service update by dealer with ODIS Online.


You are my man!! It works!!! Thank God, and You :)

Give me your paypal in pm for a little donation ;-)

car_driver
01.10.2019, 00:40
How did it works? With replace function or Update with SVM code or red menu?
No problem for help!

rendezo
01.10.2019, 10:55
How did it works? With replace function or Update with SVM code or red menu?
No problem for help!

Update SVM code, and with red menu.

May I ask you how did you know there is newer firmware?

Thank You again

car_driver
01.10.2019, 17:10
I have the same firmware on my car.

rendezo
10.10.2019, 08:46
I have the same firmware on my car.


Hello,

I'm looking for this software:

MHI2_ER_AU557x_S2570

The S is important

Thank You!

car_driver
10.10.2019, 12:04
I have it all.

You need

4M0906961C > Update to K2519_2

4M0906961Q > Update to K2570
4M0906961DF > Update to "S" (S2519_1, S2570, S0040, .....)

I can send you if you need.



Hello,

I'm looking for this software:

MHI2_ER_AU557x_S2570

The S is important

Thank You!

bedrock
10.10.2019, 12:04
The S version is just a script that gets run, it doesn't change MU software

f4nt0m
10.10.2019, 12:15
hi, did you solve your problem?

rendezo
10.10.2019, 12:23
Hello

What kind of script?

f4nt0m
10.10.2019, 12:34
teamwiever and odis e

bedrock
10.10.2019, 12:37
Hello

What kind of script?

A crypted script, on the SD card, that gets decrypted and then updates pf.conf to disable telnet over Wifi and change some tuner settings. But MU software (ifs-root) is not changed by S version, so no real need.

rendezo
10.10.2019, 13:35
A crypted script, on the SD card, that gets decrypted and then updates pf.conf to disable telnet over Wifi and change some tuner settings. But MU software (ifs-root) is not changed by S version, so no real need.

Is it possible to get this script?

Thatsmy problem, the telnet is disabled:) I like to enable again

f4nt0m
10.10.2019, 16:02
Is it possible to get this script?

Thatsmy problem, the telnet is disabled:) I like to enable again
you fix your BOSE?

rendezo
10.10.2019, 16:16
you fix your BOSE?

Yes. It is fixed. 'car_driver' helps me.

Sw. updated, and with odis.

bedrock
11.10.2019, 10:33
Is it possible to get this script?

Thatsmy problem, the telnet is disabled:) I like to enable again

The update is 4M0906961DF

Vladislav77
30.10.2019, 02:32
I would like update mib from audi a6. And iam affraid to have same problem.

What i must do for not have problem with bose

Tschako
31.10.2019, 19:23
I would like update mib from audi a6. And iam affraid to have same problem.

What i must do for not have problem with bose

Select a "user defined SWDL" in the Hidden Menu and then deselect the BOSE part in Update selection... Thats it!

Vladislav77
03.11.2019, 21:57
Thanks a lot Tschako