There's a host of black screen, they can't diagnose it
Добро пожаловать на Turbo Quattro.
Показано с 1 по 4 из 4
  1. #1

    По умолчанию There's a host of black screen, they can't diagnose it

    Host screen is black, the diagnosis of the address 5F cannot enter

    Connecting JTAG, type the command cannot execute on the terminal, enabling the IPL mode failed

    Hosts have the following output information

    IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_08253A, built 2008/06/18_15-16-25_UTC]
    CPU: SH7785 (>= 5th cut, clk mode 20. 4xDDR), 792MHz
    RAM: 512 MB (probed, DBCONF=e30002)
    FLASH: Spansion S29GL512N (32bit): 512 sectors x 256K
    FPGA: PL_MMI3G_PLUS_FPGA_9411_D1_11185A (0ms)
    *** Old-fashioned mark found on IFS @0x1c0000: .zero=0x30000013
    *** Old-fashioned mark found on IFS @0x680000: .zero=0x10000000
    starting image @680000 ...


    Startup: PL_qnx_startup-sh7785_11292A, built 2011/07/19_08-03-38_UTC
    RAM : 128 MB @0x08000000
    RAM : 128 MB @0x40000000
    RAM : 256 MB @0x50000000
    FLASH: 128 MB @0x00000000
    FPGA IRQ: Interrupt Controller ID:33 Ver:2.1.0 ILVL:7 Lines:255


    System page at phys:0800a000 user:0800a000 kern:8800a000
    Starting next program at v8804bae0
    Welcome QNX6.3.2 (QNXLabel RL_qnx_os_632_PSP3_08041A)- Harman/Becker MMI3GP Build 9411 D1-11331B
    USB-stuff (QNXLabel RL_qnx_os_632_PSP3_08041A)
    Train ID: HN+R_CN_AU_P0338 (or higher in case of train updates without MU change)
    Release Candidate: 1.0 (or higher minor version)
    MU version: 0338
    # NV: Waiting for the minirm init done indication file /dev/shmem/nvminirm.finished'
    checkFreeMem: process 'PSSBSSProcess' not found
    checkFreeMem: process 'PSSBSSProcess' not found
    Unable to access /dev/hd0
    NVLOADER: Booting DSP (DRAM Setup time = 1000 us)...
    NVLOADER: Did not find any TI DM642 DSP device
    Enabling DMA using channel 11
    Overriding default Interrupt Priority
    Current debug level = 0x7fffffff
    dmaChannel = 11, interrupt thread priority = 21
    devg-NVMEM: Mapped vaddr 0x38100000 to paddr 0x5fb2f000
    [pcidma] PL_qnx_pcidma_FMod08363A_09274A, built 2009/07/02_11-10-37_UTC
    multicored [000000011.840]:version 4.4.b, verbosity 1 (supported 4), scope 0x00000001, console: /dev/ser1 (fd=3), FILE_LOGGING, TESTCONTROL, DYNAMIC_LOAD
    multicored [000000011.842]:dbg_restart 2
    multicored [000000011.843]:using 750 buffers of size 1460 (total 1095000 bytes)
    multicored [000000011.881]:version 4.4.b, verbosity 1 (supported 4), scope 0x00000001, console: /dev/ser1 (fd=3), FILE_LOGGING, TESTCONTROL, DYNAMIC_LOAD
    multicored [000000011.885]:dbg_restart 2
    multicored [000000011.907]:udp: broadcaster created
    multicored [000000011.940]:attached to filesystem at /hbsystem/multicore, port 851
    multicored [000000011.975]:MACHINE:SH(1), total MEM 536870912, 1: 271582976 SH7785 (SH4A) 792MHz, FPU
    multicored [000000011.976]:sloop active
    multicored [000000011.978]:lo0 127.0.0.1 255.0.0.0
    multicored [000000011.979]flog0 0.0.0.0 0.0.0.0
    multicored [000000012.069]:listener_activate()
    multicored [000000012.071]:listener on port 851 active, fd=7
    Mask = c3
    GPIO 7 set to Low
    UART: Mod:0E Date:09503A Ver:2.2.2
    devc-ser8250hb: UART supports FiFo counter
    devc-ser8250hb: UART supports 32bit access
    devc-ser8250hb: RX_FIFO_SIZE:2048 TX_FIFO_SIZE:2048
    devc-ser8250hb: set IBUF size to 16384
    UART: Mod:0E Date:09503A Ver:2.2.2
    devc-ser8250hb: UART supports FiFo counter
    devc-ser8250hb: UART supports 32bit access
    devc-ser8250hb: RX_FIFO_SIZE:512 TX_FIFO_SIZE:512
    UART: Mod:0E Date:09503A Ver:2.2.2
    devc-ser8250hb: UART supports FiFo counter
    devc-ser8250hb: RX_FIFO_SIZE:32 TX_FIFO_SIZE:32
    Debug filehandle = 4
    For further debug messages have a look at multicore output consoles '/hbsystem/multicore/navi/g'
    [pcidma] PL_qnx_pcidma_FMod08363A_09441A, built 2009/10/26_07-46-16_UTC
    mam0 available
    WARNING: NON PERFORMANT MODULAR STARTUP!!!
    DSIVersion: 0.0.0
    DSISource: DSI 2011_13_13
    DSI-Build-Version: Tue Mar 29 09:56:26 CEST 2011 / DSIGEN v1.138.4
    ReleaseLabel: Int_AU_Asia_Front_SOP7_11321P
    start JDSI bundle
    HBTRACE: jdsi.verboselevel = null => verbose-level = 0 because property not set or invalid
    jdsi.loglevel : 2
    External Component Instance created
    stream factory memory mode : no pooling
    dsigen v1.138.3 - core v2.1
    prop os.arch : sh4
    prop jdsi.3SoftOSGi : true
    DSI dispatcher disabled!
    using external channel A on '/dev/dsi/ext' ...
    msgpassing channel opened on /dev/dsi/data
    prop os.arch : sh4
    prop jdsi.3SoftOSGi : true
    DSI dispatcher disabled!
    using external channel A on '/dev/dsi/ext' ...
    checkFreeMem: process 'PSSBSSProcess' not found
    'Ext A' msgpassing channel opened on /dev/dsi/ext

    Duration of starting JDSIBundle : 3771ms
    checkFreeMem: process 'PSSBSSProcess' not found
    checkFreeMem: process 'PSSBSSProcess' not found
    Exception during error dump!
    java.io.FileNotFoundException: /errlog/error_14231-001.zip
    at java.io.FileOutputStream.<init>(Unknown Source)
    at de.audi.atip.error.ErrorManager.dump(Unknown Source)
    at de.audi.atip.error.ErrorManager.a(Unknown Source)
    at de.audi.atip.error.ErrorManager.handleError(Unknow n Source)
    at de.audi.atip.error.ErrorManager.handleError(Unknow n Source)
    at de.audi.atip.base.StartupUtils.a(Unknown Source)
    at de.audi.atip.base.StartupUtils.s(Unknown Source)
    at de.audi.atip.base.StartupUtils.initDSIPersistence( Unknown Source)
    at de.audi.atip.base.StartupManager.i(Unknown Source)
    at de.audi.atip.base.StartupManager.h(Unknown Source)
    at de.audi.atip.base.w.run(Unknown Source)
    at de.audi.atip.base.StartupQueue.h(Unknown Source)
    at de.audi.atip.base.StartupQueue.run(Unknown Source)
    at de.audi.atip.thread.b.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Exception during error dump!
    java.io.FileNotFoundException: /errlog/error_14231-002.zip
    at java.io.FileOutputStream.<init>(Unknown Source)
    at de.audi.atip.error.ErrorManager.dump(Unknown Source)
    at de.audi.atip.error.ErrorManager.a(Unknown Source)
    at de.audi.atip.error.ErrorManager.handleError(Unknow n Source)
    at de.audi.atip.error.ErrorManager.handleError(Unknow n Source)
    at de.audi.atip.base.StartupUtils.a(Unknown Source)
    at de.audi.atip.base.StartupQueue.run(Unknown Source)
    at de.audi.atip.thread.b.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    checkFreeMem: process 'PSSBSSProcess' not found
    checkFreeMem: process 'PSSBSSProcess' not found
    checkFreeMem: process 'PSSBSSProcess' not found
    checkFreeMem: process 'PSSBSSProcess' not found
    checkFreeMem: process 'PSSBSSProcess' not found
    multicored [000000051.991]:startup phase ending for 0
    checkFreeMem: process 'PSSBSSProcess' not found
    checkFreeMem: process 'PSSBSSProcess' not found
    checkFreeMem: process 'PSSBSSProcess' not found
    checkFreeMem: giving up searching for process pids
    [pcidma] finished.
    Path=0 - XILINX ATAPI
    target=1 lun=0 Direct-Access(0) - TOSHIBA MK6050GA Rev: TJ10
    Exception during error dump!
    java.io.FileNotFoundException: /errlog/error_14231-003.zip
    at java.io.FileOutputStream.<init>(Unknown Source)
    at de.audi.atip.error.ErrorManager.dump(Unknown Source)
    at de.audi.atip.error.ErrorManager.a(Unknown Source)
    at de.audi.atip.error.ErrorManager.a(Unknown Source)
    at de.audi.atip.error.g.run(Unknown Source)
    at de.audi.atip.timer.WatchDog.c(Unknown Source)
    at de.audi.atip.timer.WatchDog.b(Unknown Source)
    at de.audi.atip.timer.WatchDog.fireTimer(Unknown Source)
    at de.audi.atip.timer.Timer.trigger(Unknown Source)
    at de.audi.atip.timer.TimerDispatcher.run(Unknown Source)
    at de.audi.atip.thread.c.run(Unknown Source)
    at de.audi.atip.thread.b.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Unrecoverable HMI Error, trigger a system reset!
    Reason: Incomplete HMI startup! System will shut down!
    EOLFLAG_HU_VEHICLETYPE_INDEX: 0
    EOLFLAG_HU_VARIANT_INDEX: 5
    EOLFLAG_HU_REGION_INDEX: 0




    Under the previous scheme, the replacement of FLASH can solve the problem, but I want to know if I can use JTAG fix it
    Чтобы узнать от вас

  2. #2
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    you have black screen when try connect with VCDS ?

  3. #3

    По умолчанию

    Цитата Сообщение от Crash-100 Посмотреть сообщение
    you have black screen when try connect with VCDS ?
    • Display cannot reach and VCDS connection



    Чтобы узнать от вас

  4. #4
    Местный
    Регистрация
    08.07.2014
    Адрес
    Minsk
    Сообщений
    263

    По умолчанию

    i mean your problim inside OS81050AH

 

 

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Back to top