Problem with 3GP Unit A7 - Help...
Добро пожаловать на Turbo Quattro.
Показано с 1 по 4 из 4
  1. #1
    Пользователь
    Регистрация
    19.04.2014
    Сообщений
    52

    По умолчанию Problem with 3GP Unit A7 - Help...

    Hi guys i have big problem with my wifes a7 2012. the mmi unit keep restarts him self after 5-7 minutues , after reboot need to wait long time to show "setup mmi" and language etc. sometimes it's restart before fully booted. i buy that car few days ago , i think someone did update to this cars cuz the BOSE souds like crap , and i have this error over and over.

    what if done:

    -Updated from (factory or not , propbly not) k0285 to 900
    -updated map

    and evryhing was ok for 1 day and still the same , unit cant get fully booted or get 1 on 10 boot.

    after updated software evryhing ok for 1 day. and same

    maybe only AUDI dealer ONLINE updated to factory ?

    1 Fault Found:

    01043 - Control Module; Incorrect Software Version

    Freeze Frame:

    Bin. Bits: 00000000 00000000

    Bin. Bits: 00000000 00000000

    Bin. Bits: 00000000 00000000

    Bin. Bits: 00000000 00000000

    Bin. Bits: 00000000 00010000

  2. #2

    По умолчанию

    It seems to be the wrong SW Version. The K0900 is available for the Q3/A6/A7/A8, and for the A4/A5 and for the A1. All versions are 0900.
    Look with an editor in the content of the file "metainfo2.txt" There must be the first version entry names as follows:

    [common]
    release = "HN+R_EU_AU_K0900"
    vendor = "HBAS"
    variant = "9425"
    variant2 = "9406"
    variant3 = "9407"
    variant4 = "9408"
    variant5 = "9409"
    variant6 = "9410"
    variant7 = "9411"

    These version is for the Q3-A6/7-A8...

  3. #3
    Пользователь
    Регистрация
    19.04.2014
    Сообщений
    52

    По умолчанию

    ive check that at the first . i already get that car with "wrong software version" falaut and already updated to 900 for a7 and 770 to, maybe someone change the unit and it's from q5 q4 ?

  4. #4

    По умолчанию

    verify the HW variant on the main unit ID label to identify correctly

 

 

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Back to top