MMI 3G High (америка) без Sim ->MMI 3G High (америка) c Sim
Добро пожаловать на Turbo Quattro.
Страница 1 из 2 12 ПоследняяПоследняя
Показано с 1 по 20 из 23
  1. #1
    Новичок
    Регистрация
    23.12.2013
    Адрес
    Минск
    Сообщений
    9

    По умолчанию MMI 3G High (америка) без Sim ->MMI 3G High (америка) c Sim

    Добрый день. Разбирал свою MMI 3G High и заметил, что на дополнительной плате MMI (что отвечает за слоты SD карт и BT) имеется распайка под установку держателя Sim карточки.
    Возник вопрос. Возможно ли впаять держатель и заставить MMI поднимать интернет с неё? Или быть может для этого на основной плате не хватает какой-нибудь микросхемы и антенны для приема GSM сигнала? Если только антенны, я думаю не беда можно и её припаять.
    Что скажите?
    Блок MMI 3G sim.jpgБлок MMI 3G sim2.jpgБлок MMI 3G sim1.jpg

  2. #2
    Пользователь
    Регистрация
    18.02.2014
    Сообщений
    65

    По умолчанию

    It is not going to work, the unit needs a extra board attached to the mainboard (on the right side).
    This board has the telit chip for wland and GSM/UMTS and the antenna connector.

  3. #3
    Новичок
    Регистрация
    16.05.2014
    Адрес
    Казань
    Сообщений
    26

    По умолчанию

    so, maybe it can be possible to find out this chip and attach to mainboard so it will work?

  4. #4

    По умолчанию

    Hello All,
    If I understand right on the MMI 3G without sim there are not the:
    1) Sim card holder (can be soldered between the two SD card slots)
    2) The GSM / UMTS telit module.

    Anyone have more photos/ info regarding where the Telit module is located on a MMI3G with sim?
    My MMI have not the SIM and I cannot dismount it to see which and where the GSM module is located.
    Thks
    D

  5. #5
    Пользователь
    Регистрация
    08.04.2014
    Сообщений
    33

    По умолчанию

    Hi, this is what the GSM / UMTS Module Looks like.


    umts-module2.jpg

    if you open the unit - front side pointing to you -
    it is located on the right side on the backside of the unit.
    There is a small connector soldered to the board
    where the module is plugged in.

  6. #6

    По умолчанию

    Цитата Сообщение от bertelsmann Посмотреть сообщение
    Hi, this is what the GSM / UMTS Module Looks like.


    umts-module2.jpg

    if you open the unit - front side pointing to you -
    it is located on the right side on the backside of the unit.
    There is a small connector soldered to the board
    where the module is plugged in.
    Interesting.
    So the module you taken in the picture in connected using a flat cable to the mainboard of the MMI right?
    You have opened the module you taken in the picture? If yes could you post more pictures? I think it is a standard telit module....
    Thanks
    D

  7. #7
    Пользователь
    Регистрация
    08.04.2014
    Сообщений
    33

    По умолчанию

    Hi, no, no flat cable module has the A connector on its left bottom
    it is directely plugged onto the connector on the main pcb

    sorry i do not have more pictures
    the unit is already back in the car.

    i do not think it is any standard module
    the antenna connector is on the backside of the module
    seems to be special made for the mmi unit.

    regards
    regards

  8. #8
    Новичок
    Регистрация
    16.05.2014
    Адрес
    Казань
    Сообщений
    26

    По умолчанию

    maybe we can find this module in stores and connect it to MMI? googling PPIS UMTS and BE9449 gets only some pages, but none of them can sell it

  9. #9
    Пользователь
    Регистрация
    18.02.2014
    Сообщений
    65

    По умолчанию

    It is the telit uc864-e (vendor=0x1bc7,device=0x1003), probably on a mother board and sealed in a metal case.
    The module UC864-e is USB based, so maybey it is possible to use the other usb for data only.
    For voice calling there have to be more lines connected.

  10. #10

    По умолчанию

    In the HB Metal Case is located the standard Telit UC864-E Module-AUTO GSM Usage for Europe and in the NAR (US) Units it is an Telit UC864-AWS-AUTO. On the Free market, there is A way to buy the Telit print-mount units only (means without the HB Case) via the Telit distribution network.
    Изображения Изображения
    Последний раз редактировалось Tschako; 03.10.2014 в 17:21.

  11. #11
    Пользователь
    Регистрация
    18.02.2014
    Сообщений
    65

    По умолчанию

    is it possible to swap the internal UC864 unit in the metal case.
    I have a NAR version and wantto have the EU version.

  12. #12

    По умолчанию

    Yes, I think so. In Germany the UC864-E-AUTO costs around 150 EUR. The local distributors were listet on the Telit webside "www.telit.com" for each country.

    After exchange of the GSM-unit you have to reflash the right MMI3GP software, means K0767 or K0770 depending of the MMI Unit.

  13. #13
    Местный Аватар для Doofy
    Регистрация
    27.02.2011
    Адрес
    Беларусь, Минск
    Сообщений
    149

    По умолчанию

    Может кто знает. Машина из америки. Не ловит GSM сеть вообще.
    Подойдет ли UC864-E-DUAL (http://www.aliexpress.com/item/UC864...943317578.html) вместо UC864-AWS-AUTO
    UC864-E-AUTO не могу нигде найти
    Спасибо
    Последний раз редактировалось Doofy; 03.02.2015 в 14:09.
    Запчасти б/у из европы. +375291155373

  14. #14
    Пользователь
    Регистрация
    18.02.2014
    Сообщений
    65

    По умолчанию

    I used a UC864-AWS, works also they are a littlebit easier to buy

  15. #15

    По умолчанию

    у меня не подошел

  16. #16
    Новичок
    Регистрация
    07.11.2015
    Адрес
    UK
    Сообщений
    3

    По умолчанию

    Has anyone replaced the Telit UC864?
    I have seen adapter boards that should work with a Telit HE910 and LE910 which are faster. http://www.roundsolutions.com/shop/p...-UC864-H9.html and https://adaptivemodules.co.uk/index....roduct_ID/1055

  17. #17

    По умолчанию

    I´ve tried a little bit playing with the GSM modules. The next step must be to migrade to the EU LTE level with change of the module...
    To modify the used AT command set in the relevant scripts should not be the problem.

  18. #18
    Новичок
    Регистрация
    07.11.2015
    Адрес
    UK
    Сообщений
    3

    По умолчанию

    Цитата Сообщение от Tschako Посмотреть сообщение
    I´ve tried a little bit playing with the GSM modules. The next step must be to migrade to the EU LTE level with change of the module...
    To modify the used AT command set in the relevant scripts should not be the problem.
    I think we should try:


    All of these would require the adapter board. This is because UC864 used the 80pin connector, but xE910 use the LGA connector. The adapter board is available from:


    Guides to using the adapter boards are here:


    Who wants to be the first to try it?

  19. #19
    Новичок
    Регистрация
    07.11.2015
    Адрес
    UK
    Сообщений
    3

    По умолчанию

    There are two other problems that need solving:
    • Telit UC864-E-AUTO has 1 antenna connector. The new models all have 2 or 3 antenna connectors. Can they work with only 1 antenna? Or can the antenna be split to connect the extra connectors?
    • Telit UC864-E-AUTO used a landing pad for its antenna using Rosenberger B2B connector 99CI106-030Z. This will need to be connected by microwave cable to the antenna port on the new model.

  20. #20
    Местный Аватар для Doofy
    Регистрация
    27.02.2011
    Адрес
    Беларусь, Минск
    Сообщений
    149

    По умолчанию

    А у меня проблема осталась открытой. По прежнему не ловит сеть вообще! 3GP SIM USA
    Ребята, подскажите! Все-таки какой модуль нужно купить, чтобы заработала сеть 3G.
    Я даже готов заплатить, чтобы мне кто-нибудь сделал.
    Audi Q7 2012 USA
    Спасибо!
    Запчасти б/у из европы. +375291155373

 

 

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Back to top