постоянно спрашивают. поэтому давайте тут этот вопрос поднимем
постоянно спрашивают. поэтому давайте тут этот вопрос поднимем
Где-то писали, что в MMI 3G стоит жесткий диск с интерфейсом PATA (IDE или типа IDE, но не SATA).
Найти такие трудно, да и стоят они не дешево.
Ну а для тех кто понимает английский - тут:
http://a6retrofit.tripod.com/article...harddrive.html
Вроде как прогами типа Paragon/Acronis можно обойтись.
Последний раз редактировалось djdeniska; 18.01.2014 в 00:08.
речь о замене на другой ,ссд рата дофига на ебее
тут акронис не помошник он не умеет понимать куэнх6 файл систем может тока посекторные копии делать
..т.е. там partition type 179?
FDISK
Ignore Next Prev 1 2 3 4 Change Delete Boot Unboot Restore Loader Save Quit
_____OS_____ Start End ______Number__CPS: 3 Size Boot
name type Cylinder Cylinder Cylinders Blocks AS: 2
--> 1. QNX ( 77) 0 23555 23556 48243132 23556 MB *
2. QNY ( 78) 23556 34372 10817 22153635 10817 MB
3. QNZ ( 79) 34373 35203 831 1702890 831 MB
4. Extd'd ( 5) 35204 38153 2950 6040440 2949 MB
Choose a partition by typing the partition number OR moving the pointer
with the UP/DOWN arrows.
Then, choose one of the actions on the top line of the screen.
Drive : /dev/hd0 Config: 64 Heads
Size : 38154 Mbytes 32 Sectors/track
Loader: QNX 38154 Cylinders
512 Block Size
Last cylinder is 38153
eide_driver_path = /dev/hd0
strategy_flags = -linked_mode;
/* this files are used for hddmgr persistency */
persistency_file_path = /HBpersistence/hddmgr.persistency
eeprom_file_path = /tmp/hddmgr.dirtybits
/* the first entry is the first partition to mount... */
/* only mmebackup1 and persistence are mountet rw */
mount_path_name = -r -t qnx6 /dev/hd0t79 /mnt/sss ;
mount_path_name = -r -t qnx6 /dev/hd0t77 /mnt/nav ;
mount_path_name = -r -t qnx6 /dev/hd0t187 /mnt/gracenode ;
mount_path_name = -r -t qnx6 /dev/hd0t78 /mnt/mediadisk ;
mount_path_name = -w -t qnx6 /dev/hd0t187.1 /mnt/mmebackup1 ;
mount_path_name = -w -t qnx6 /dev/hd0t187.2 /mnt/persistence ;
mount_path_name = -w -t qnx6 /dev/hd0t187.3 /mnt/img-cache ;
mount_path_name = -w -t qnx6 /dev/hd0t187.4 /mnt/pv-cache ;
Я так понимаю, что тема закрыта? No way? Рано или поздно hdd рассыпится и что делать? Голову менять!?
Hi All,
I have now performed this "HDD Upgrade" procedure MMI 3G Plus units several times in the last few months and it works like a charm:
1. Download macrium reflect free edition.
2. Remove the original Toshiba HDD from the MMI unit.
3. Connect the drive into IDE<->USB connector
4. Clone the drive into an image using macrium (Forensic method)
5. Disconnect the original drive and insert a bigger drive (you have 3 choices: Normal IDE HDD (not recommended) / SDXC SD card in IDE Sleeve (Good) / IDE SSD (Best))
6. Restore the image into the drive, one partition at the time.
7. On the second partition re-size the destination partition to expand to the remainder of 'new addition' space
8. Restore the rest of partitions.
9. Connect the new drive into MMI unit
10. Jukebox is now not working, so go to Setup -> Settings of MMI -> Reset and Select Jukebox.
11. Reboot MMI and repeat step number 10 again.
12. Final reboot.
13. Jukebox is now resized, the rest of the systems are all working ok.
I hope this helps!
Regards,
Keldo Gliana
MMI 3G has 6 partitions -- read more here: http://www.scribd.com/doc/221492426/...ive-PartitionsHow many partitions original HDD has?
MMI 3G Plus has 8 partitions.
MMI 3G and 3Gp Partitions.png
Yes - for both, MMI 3G and 3G Plus you need to expand the second partition.expand the space of partition no.2 (jukebox)
Expand to the remainder of 'new addition' space.To the rest of space according to new drive volume. Correct?
See this photo:
MMI 3G and 3Gp Jukebox resized.png
Последний раз редактировалось keldo; 23.06.2014 в 10:18.
Хотел с этим заморочиться, но не нравится организация музыкальной библиотеки на импортированных данных, а именно медиабиблиотека. Если бы там можно было просматривать данные как на SD или другом внешнем накопителе, то уже бы давно поменял на SSD 128gb китаский с ебэя и сделал мануал. А так, не вижу смысла. Двух флешек на 64гб и USB HDD на 750gb с потреблением 487mA достаточно под любые нужды
Если же жесткий диск накрываться начнёт, то сделаю копию на 64gb ssd и хрен бы с ним.
Ну я уже как-то снимал хард. Есть у меня образ хоть и 0145 версии на рнс, так что главное, что разметка останется, а на остальное положить можно. Ну накачу софт ещё раз, не велика проблема. Хотя по феншую, запилю медиабиблиотеку, почищу хард и сниму образ. Вот как до uknik-а доберусь.. А то пропал супостат)
Ну да, но всё равно кастыли. Не удобно в общем. Если великий программер UkNik поймёт, как снова оживить WAV, то может и был смысл, но всё равно дак себе идея. Для авто сейчас мне и AAC 512kbps хватает
Последний раз редактировалось zerbino; 24.06.2014 в 11:10.
можно, копировать тока их нада скриптом туда а не импортом
Вот такой переходник пойдет под новые SSD?
http://mysku.ru/blog/aliexpress/28910.html