Просмотр полной версии : Prolem to connect unit to online
Hi my friends,
I need your help to solve the problem to connect my unit MMi 3g+ (without sim) to internet (google earth and online services).
Following the advice of Sergey I connected the ami->usb to dlink dub e-100 rev B1 and then dub e-100 to tp link 3040 (with rj45).
I enabled wifi router in my android phone and then I configured the 3040 as wisp client (connected to wifi of my android phone and to dub e100 with rj45).
I see the tplink 3040 as client in my android phone but if I select google earth in navigation nothing happens (in 3040 control panel I don't see any packet from dlink even if I see tx/rx lights in e100).
If I connect my notebook to 3040 with wifi I can navigate and I can navigate also if I connect my notebook to 3040 with rj45.
I see that 3040 gives ip as 192.168.0.X (X>100) while my android phone router in range 192.168.43.X.
The routing tables of 3040 seems ok because with my pc connected with wifi to 3040 I can navigate.
I attach some photos with some screens of hidden menu:
23631
23630
23632
23633
23634
23635
What I'm doing wrong?
Who can help me?
Thanks
sergeynik
02.03.2014, 15:56
setup "Install Fair Mode" in eng. menu->config
or run use script next lines
touch /HBpersistence/usedhcp
touch /HBpersistence/DLinkReplacesPPP
Hi Sergey,
thanks for the help.
I clicked on "Install Fair Mode" in hidden menu: the output was shown in the screen and it seems that it did some backup file and then he created dhcp and dlinkreplacePPP.
Then I rebooted but the result is the same: the google earth remains in onloading and it is no possibile to connect to audi connect.
I attach some screens of hidden menu.
Tplink seems to give the ip 192.168.0.100 to dlink (see image below): if I see this ip is it possibile to think that dhcp of tplink 3040 is working well?
Is this ip correct (for internal routing table) to route packet from MMI to external router android?
Looking at adapter page it seems that dlink is known as 10 full duplex link and not 100 full duplex link: is it correct?
Maybe my ami to usb cable is not so good and I need a more quality cable to support 100 Mbit speed.
(the ami connection is ok because I tried to connect a usb pen and it is ok).
What should be the problem?
23653
23658
23655
23656
23657
sergeynik
02.03.2014, 22:25
speed setup in cfg file in ifs-root
#ASIX Chipset
vendor=0x0b95,device=0x1720,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.2 55.0.0
vendor=0x0b95,device=0x7720,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.2 55.0.0
vendor=0x0846,device=0x1040,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.2 55.0.0
vendor=0x2001,device=0x3c05,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1 phy_88772=0,netif=5,netip=172.16.250.248,netmsk=25 5.255.0.0
sergeynik
02.03.2014, 22:32
need up DNS
manual DNS setup. touch in efs-system/etc/resolv.conf
inside file
nameserver 123.123.123.123
Ho can I install DNS using a script?
sergeynik
02.03.2014, 23:25
yes
Hi Sergey
I tried to write a script to write what you told me.
sergeynik
03.03.2014, 00:58
echo nameserver 123.123.123.123 > /mnt/efs-system/etc/resolv.conf
IP DNS set correct !!
sergeynik
03.03.2014, 01:00
or create file on PC and copy use script
Hi Sergey
partial good news. :)
I installed resolv.conf with a script, following your instruction.
After that Google earth is online, audi connect is ok and also the search using google earth.
Anyway I have no TMC online menu.
If I go to tmc info page in MMI, I don't see any line with "Online traffic data".
In the hidden menu in internal_module_1+2 I have PSD Off selected.
This is my conf:
23683
Is the error PSD Off?
Do I have to deselect it?
Thanks very much
I found in the hidden menu a part about TMC which I had as undefined.
I tried to set as online traffic + free tmc but nothing happens: no voice "Online traffic data" in info settings page.
Could you tell me exactly which values to set?
23689
I found in the hidden menu a part about TMC which I had as undefined.
I tried to set as online traffic + free tmc but nothing happens: no voice "Online traffic data" in info settings page.
Could you tell me exactly which values to set?
23689
Spimmar, could you share the script made to the DNS?
thanks ;-)
Hi Sergey I read that for traffic online is important channel 69 of unit mmi: is it true?
Do you know what value should it be set?
Thanks
sergeynik
03.03.2014, 23:29
69 Ch 15Bit (+32768)
69 Ch 15Bit (+32768)
Sergey you are the men!!!
Thanks very much
69 Ch 15Bit (+32768)
Sergey thank you! Are you a big ...!!!
We are implementing a program in linux with rasperry to connect online, if you need the program I share it willingly.
Sergey one last question.
The question is about my audi pin code: this pin is given after you register a car with native audi connect to my audi site.
This pin let you to transfer poi and travels from pc to MMI.
Sergey, do you know something about it?
In your opinion can we bypass this?
To activate streeti view it is needed to go down 30 meters in the zoom.
paszczak
06.03.2014, 21:31
Hello Sergey, hello all
nice manual - good work
but I have a small problem I have 670G unit so with build in SIM
Spinmar wrote:
To enable online traffic you have select "Online traffic data" to yes and after connecting to audi server, the licence will be activated for 3 years.
After all I attach some screens of what you will have:
but when I am checking license all the time I got answer - currently the query cannot be processed.
any ideas whats wrong?
I had not traffic online factory installed - I added it by channel 69 where I set value 32783. then I got in menu traffic online but impossible to add licence
even I asked about audi - their answer was as usually - this feature existiing from W45 2012 and impossible to add later http://www.club-q5.ru/forum/images/smilies/wink.gif
pls help me - I am fighting with this since begining of 2013
my current version SW is 770 but same issue I had with 612, 614 and with 518_7
I have screnshots from green menu and others but I am not able to upload anything to this forum http://www.club-q5.ru/forum/images/smilies/sad.gif
if I will swap 5F to another one it will works? if yes whats a problem that mine doesnt works?
A question I have About Google icon in the monitor.
Even if Google Earth is working well I do not see tha icon of "Google 3G" in the bottom right corner of MMI.
Is it possibile to insert it?
paszczak
20.03.2014, 01:02
A question I have About Google icon in the monitor.
Even if Google Earth is working well I do not see tha icon of "Google 3G" in the bottom right corner of MMI.
Is it possibile to insert it?
hi Spinmar
yes - I have gogle earth and other working services like fuel prices, weather etc
jjlucas76
20.03.2014, 02:41
spinmar could you share the scripts, please?
I'm trying to use sergeynik script but I cannot change the resolv.conf if I use the command "echo nameserver xxx.xxx.xxx.xxx > /mnt/efs-system/etc/resolv.conf" from run.sh.
Do I need to create another script and upload it to /mnt/efs-system/scripts and then using sergeynik run.sh just touch that file to run it?
Luca
@Paszczak: the services you are writing ( fuel prices, weather, etc...), are ok. Google earth and tmc online are working well.
I'm asking how to insert the Google icon in the bottom right corner of MMI display, where now I have the time.
@jjlucas76: you can download the file http://www.datafilehost.com/d/63f6b577
Maybe the trick is the value of channel 69.
Yesterday I compared my value with the value of a friend of mine who has unit 670 and then he has the Google icon.
Ma value of channel 69: 32783 (bit 0, 1, 2, 3, 15 setted);
My friend: 32776 (bit 3, 15 setted);
So I have bit 0, 1, 2 setted while my friend not.
How is the meaning of these bits?
Do I have to deselect them?
Thanks
jjlucas76
20.03.2014, 16:40
Many Thanks I'll try to get Google online first :) and then report back about the google icon in the corner.
My head has 767 installed.
paszczak
20.03.2014, 17:07
@Paszczak: the services you are writing ( fuel prices, weather, etc...), are ok. Google earth and tmc online are working well.
I'm asking how to insert the Google icon in the bottom right corner of MMI display, where now I have the time.
@jjlucas76: you can download the file http://www.datafilehost.com/d/63f6b577
Maybe the trick is the value of channel 69.
Yesterday I compared my value with the value of a friend of mine who has unit 760 and then he has the Google icon.
Ma value of channel 69: 32783 (bit 0, 1, 2, 3, 15 setted);
My friend: 32776 (bit 3, 15 setted);
So I have bit 0, 1, 2 setted while my friend not.
How is the meaning of these bits?
Do I have to deselect them?
Thanks
I have HW 670 (build in sim card) - my channel 69 has value 32783 - but before I had there value 15 then no traffic online menu.but before even value was 15 I had google icon also so I dont think so its related with this icon
what do u mean bit 0,1,2,3, 15 setted? in adaption I am able to set new value only do u mean long coding?
Spinmar - if u want I can scan my settings for you for compare - just let me know what we should to compare.
I am intresting in compare with yours cause my traffc online still doesnt works
This is a bad news :(
It means that the google icon is not related to the value of channel 69.
Probably only Sergey can help us
paszczak
20.03.2014, 17:29
This is a bad news :(
It means that the google icon is not related to the value of channel 69.
Probably only Sergey can help us
what do u mean bit 0,1,2,3, 15 setted? in adaption I am able to set new value only do u mean long coding?
Spinmar - if u want I can scan my settings for you for compare - just let me know what we should to compare.
what do u mean bit 0,1,2,3, 15 setted?
They are related to the value of the channel.
Only Sergey knows exactly the meaning of each bit.
paszczak
20.03.2014, 17:52
They are related to the value of the channel.
Only Sergey knows exactly the meaning of each bit.
can you tell me yours bit setted? can you show me your screenshots? I dont know where shall I looking for - as I wrote in adaptation I am able to set value only
Maybe I'm not clear enough.
In adaptation 10 there are 255 channels and for each channel you can set a value.
You cannot set each bit but you can set only a value which you can image as composed by different bit.
So as sergey wrote, to set bit 15 means +32768.
Only few persons knows the meaning of each bit and Sergey is one of these.
I'd like to add Google icon to bottom right corner and I don't know how to do it.
paszczak
20.03.2014, 18:19
Maybe I'm not clear enough.
In adaptation 10 there are 255 channels and for each channel you can set a value.
You cannot set each bit but you can set only a value which you can image as composed by different bit.
So as sergey wrote, to set bit 15 means +32768.
Only few persons knows the meaning of each bit and Sergey is one of these.
I'd like to add Google icon to bottom right corner and I don't know how to do it.
ok clear but bu what mean in this case that u have setted bit 0,1,2,3 and 15? and your friend just bit 3?
so in case o your friend if set bit 3 in channel 69 means his value is 32776 - but why not 3+32768 so 32771?
how can you set in same time bit 0,1,2,3 and 15? sorry I really dont understand - but I really want to compare my settings with your or your friend for get traffic online finaly - hope you will help me :)
ok clear but bu what mean in this case that u have setted bit 0,1,2,3 and 15? and your friend just bit 3?
I have bit 0,1,2,3,15 setted. This means value 32783.
My friend: bit 3, 15 setted. This means value 32776
so in case o your friend if set bit 3 in channel 69 means his value is 32776 - but why not 3+32768 so 32771?
bit 3 means +8
bi 15 means +32768
how can you set in same time bit 0,1,2,3 and 15?
It means set my value: 32783
paszczak
20.03.2014, 19:05
I have bit 0,1,2,3,15 setted. This means value 32783.
My friend: bit 3, 15 setted. This means value 32776
bit 3 means +8
bi 15 means +32768
It means set my value: 32783
so whats possible value range for channel 69? 15 and then 32768 up to 32783? what was your original factory value there? 15?
I am asking about range cause I want to set diffrent values for solve my issue with traffic online
Hi Sergey
do u think my problem with traffic online is related with wrong value in channel 69?
jjlucas76
22.03.2014, 01:39
I have managed to get the head online. no google icon on the right bottom corner of the MMI, but everything else works as expected.
Big thanks to Sergey and Spinmar for the knowledge and for sharing.
@Spinmar have you managed to change the adapter speed to 100Mbit, not that it will make any difference in performance, as the bottleneck here is the 3G connection, but just curios if you did and how.
I am using:
-DLINK adapter DUB-E 100 ver B1 for USB -> LAN converter
-Vonets VAR11N as WISP client
-2 Ports USB adapter to duplicate the port of the AUDI USB Cable.
I had tried also the Gembird NIC-U1 as USB -> LAN converter but i snot recognised by the head.
Good!
Unfortunately the Google icon is not related to 69 channel.
Let's see if Sergey will tell us something.
Problem solved
Google.jpg (http://digilander.libero.it/plauto5/Google.jpg)
jjlucas76
23.03.2014, 05:04
what was it?
jjlucas76
25.03.2014, 23:45
Problem solved
Google.jpg (http://digilander.libero.it/plauto5/Google.jpg)
How did you get the Google icon to work?
Hi jlukas the trick is in the submenu telephony of the hidden menu: you have to set Nad activation and nad operation mode.
Try it and magically Google icon will be shown.
Remember to restart mmi
jjlucas76
26.03.2014, 01:24
I will thank you.
paddchas
28.03.2014, 23:05
Hi all
this is a great mod. I am really hoping to get it working. Unfortunately I have the same issues as spinmar had, but even after running the script to install resolv.conf
any further help you can provide would be appreciated. I've posted the exact details of my setup here
http://www.a5oc.com/forums/a5-s5-topics/23421-new-google-mmi-installed-7.html#post519049
i hope hope it's ok to link to this?
hope you can help
thanks
paszczak
01.04.2014, 01:33
hi all
FInaly I got traffic online license :)
valid to 31/03/2017 - hope it will works also tommorow
but I have big request to you guys - can someone who has map 8R0060884AH ECE 5.13.8 prepare route to warsaw poland and check can see traffic online in poland or not?
I have license - see green, yellow and red roads in germany france austria even in czech republic but not in poland
I dont know is it related with my map (2012) or with FW - I have old version K485_18 already
BTW if I want to move from K485 to 770 can I upgrade it directly to 770 or need to install v 518 then 612, 614 before?
Black Wolf
08.04.2014, 18:55
Для этого можно использовать Raspberry Pi в сочетании с сим, USB UMTS,
http://shop.ontika.net/product_info.php?products_id=29&osCsid=b2ojtfp3i4u79p5ikudongv5p2
Для этого можно использовать Raspberry Pi в сочетании с сим, USB UMTS,
http://shop.ontika.net/product_info.php?products_id=29&osCsid=b2ojtfp3i4u79p5ikudongv5p2
????
We already solved the problem about online services.
No commercial product needed.
Black Wolf
08.04.2014, 21:43
Не буквально, я положил только как идея, а не как предложение, потому что я являюсь автором решения! Кто-то может использовать эту идею и использовать Raspberry Pi, новую опцию.
Кто может подсказать и куда рыть. На картах 2012 года онлайн работал. Переписали еепром блока 5F от другой головы, поправили секцию только с СР и получилось, что серийник чужой, онлайн перестал работать. Я изменил серийник на родной, но онлайн все равно не работает. Есть какие мысли?
dave chante pas
29.04.2014, 16:05
hi guys,
i have a 3GP MMi without AMI.
How can I link the dlink dub e-100 & tp link 3040 to my car then?
I should use another stuffs??
Thanks for support ;)
Сергей, а не вкурсе номер лицензии на онлайн сохраняется в голове, и если сохраняется, то где?
VitaminA
08.05.2014, 15:31
Hi, i have 3G+ without sim 4L2 035 666.
In order to organize on-line, thanks to all, i bought RJ45-USB (GEMBIRD NIC-U1), Wi-Fi Router (TP-Link 3040), and cable AMI-USB.
Firstly, i did all the settings in Hidden Green Menu according to this post and Q5 Club. But i did not up DNS by script as i've been notified by DUK63 that 3G+ has already with DNS.
My problem is that MMI do not see GEMBIRD NIC-U1 (RJ45 - USB) adapter, probably... When i connect this device to computer the LED on the device is ON, when i connect it to AMI cable there is NO any light!
BUT in Green Menu i can see that the MMI detected the device!
Could you please let me know if you have any idea to solve it?
Here's some pictures to check my settings:
What i did wrong?
25609 25612 2561025611 25613 25614 25615 25616 25617 25618
Also, what does the following menu can switch on?
25619
I saw that commercial AMI On-line box can be connected to MMI by Wi-Fi. How to do it? I have activated W-Fi on MMI but there is no any setting to write IP manually, or to find any neightbor wi-fi...
Thanks in advance!
Your problem is that GEMBIRD is not detected by mmi.
Other people had this kind of problem with GEMBIRD and they solved it changing usb->lan adapter.
About resolv.conf I see that it is undefined: after changing adapter if you have problem to connect to internet try to change it.
VitaminA
08.05.2014, 16:13
Dear Spinmar,
you could see on pictures that MMI is detecting GEMBIRD, it is mentioned as ASIX elec. AX88x72A. 1st photo.
Do i need to run DNS script?
About resolv.conf I see that it is undefined: after changing adapter if you have problem to connect to internet try to change it.
Changing what? resolve.conf ? or ?
No in the picture 5 you can see that the adapter is not detected.
VitaminA
08.05.2014, 16:47
No in the picture 5 you can see that the adapter is not detected.
What is next type of adapter is suitable for MMI? I bought GEMBIRD, as it was mentioned on GUIDE from Q5 Club as promised model...:)
I use dlink dubE100 (version B1).
Anyway other persons used succesfully also trendnet TU2-ET100 (white one with rev 4).
VitaminA
08.05.2014, 17:14
I use dlink dubE100 (version B1).
Anyway other persons used succesfully also trendnet TU2-ET100 (white one with rev 4).
Thanks a lot, i will find it and try...
Anyone know if this is still working? I have all setup, but traffic license will not activate? Have VAG blocked at server?
VitaminA
22.12.2015, 08:46
Anyone know if this is still working? I have all setup, but traffic license will not activate? Have VAG blocked at server?
How old is your car? What is the screen do you see when you trying to get the license?
How old is your car? What is the screen do you see when you trying to get the license?
Car is Q5 MY16 firmware 900 on board, MMI no sim, will take screen shot later, but just says a license is available, when click activate, it just returns to previous menu, go round in circles
VitaminA
22.12.2015, 10:40
Car is Q5 MY16 firmware 900 on board, MMI no sim, will take screen shot later, but just says a license is available, when click activate, it just returns to previous menu, go round in circles
You`ve got new car. Unfortunately it looks like Audi has bloked your VIN (you`ve got mmi with no sim) according to new Audi rules... If you want to see an official screen that your licence has rejected, push activate (or get licence, i don`t know how it indicated in English) then in 0,5 sec push Back, then again push Activate and continue round in circles from 8 to... times. Then probably you will see the rejected screen ... it was posted yesterday on audi-club.ru by r_Q7
You`ve got new car. Unfortunately it looks like Audi has bloked your VIN (you`ve got mmi with no sim) according to new Audi rules... If you want to see an official screen that your licence has rejected, push activate (or get licence, i don`t know how it indicated in English) then in 0,5 sec push Back, then again push Activate and continue round in circles from 8 to... times. Then probably you will see the rejected screen ... it was posted yesterday on audi-club.ru by r_Q7
:sorrow: thanks for info, any other ways to get traffic online?
VitaminA
22.12.2015, 14:02
:sorrow: thanks for info, any other ways to get traffic online?
Only in Russia and not for free ((
:sorrow: thanks for info, any other ways to get traffic online?
can anybody tell me where the traffic online license usually is stored?
thx
Arturian
28.03.2016, 16:45
can anybody tell me where the traffic online license usually is stored?
thx
Hi guys,
Online traffic
efs-persist\SWDL\Log\service
efs-persist\SWDL\Log\user
We need these two files one online traffic works ...
Hi guys,
Online traffic
efs-persist\SWDL\Log\service
efs-persist\SWDL\Log\user
We need these two files one online traffic works ...
thanks Arturian! :D
has anybody tried to copy those 2 files to another car so far?
Thats are folders which hold the Update Logs . Nothing to do with the Traffic Online authorization.
Arturian is joking ...
Это кстати действительно была акуенная шутка :D
Ну это ты понял, что шутка :-)
Это кстати действительно была акуенная шутка :D
For sure!!!! We know where it realy is... :cool:
Hi,
My license has expired before the 3 years after activation.
The MMI3G+without SIM was retrofitted and since a few weeks-ago online traffic worked well.
It's like someone has activated my license on his car with my VIM or my VIM is blacklisted on AUDI servers ?
There is a way to reactivate this service ?
My Workshop dealer can't do it because the car is not equiped on factory with this MMI.
Thanks !
Powered by vBulletin® Version 4.2.6 by vBS Copyright © 2024 vBulletin Solutions, Inc. All rights reserved. Перевод: zCarot